6155 FG Marder body shell Zenoah white

€99.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6155

EAN: 3410564506660

Supplies

6156 FG Team ecals Marder/Zenoah - 1pce.

Standard Marder decals.Sheet dimensions:430 x 310 mm

€33.90*

6056 FG Window grid l/h

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195Height: 80 mmContents:1 piece

€15.90*

6057 FG Window grid r/h

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195 mmHeight: 80 mmContents:1 piece

€15.90*

6058 FG Window grid front

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 115 mmHeight: 110 mmContents:1 piece

€15.90*

6111 FG Clip for window grid

Genuine FG spare/option part.Clips for mounting the windows gitters on the FG marder bodies.Dimensions:Outer diameter: 12 mmFor 4 mm pinsContents:15 pieces

€7.90*

Product information "6155 FG Marder body shell Zenoah white"

Genuine FG spare/option part.

The FG Marder body shell is delivered white and without window gitter or decal set.

Dimensions:

Length: 580 mm
Width: 240 mm
Height: 205 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y3006 rc-car-online decal sheet yellow

Genuine HT spare/option part. rc-car-online lettering with correspondig logo. All decals are cutted with a plotter. Dimensions:Sheet with car logos: 450 x 160 mmSheet with rc-car-online letterings: 450 x 140 mmContents:1 piece

€7.90*

6156 FG Team ecals Marder/Zenoah - 1pce.

Standard Marder decals.Sheet dimensions:430 x 310 mm

€33.90*

6056 FG Window grid l/h

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195Height: 80 mmContents:1 piece

€15.90*

6057 FG Window grid r/h

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195 mmHeight: 80 mmContents:1 piece

€15.90*

This product is currently not available.

6058 FG Window grid front

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 115 mmHeight: 110 mmContents:1 piece

€15.90*

60100/02 FG Rear wing white

Genuine FG spare/option part. Dimensions:Length: 123 mmWidth: 246 mmHeight: 37 mmContents:1 piece

€23.90*

6111 FG Clip for window grid

Genuine FG spare/option part.Clips for mounting the windows gitters on the FG marder bodies.Dimensions:Outer diameter: 12 mmFor 4 mm pinsContents:15 pieces

€7.90*

6011 FG Side guards left/right

Genuine FG spare/option part. Side guards suitable for Marder, Off-Road Buggy 2WD and 4WD body.Contents:2 pieces

€22.95*

y1099 Flex wing rc-car-online - 1 pce.

The flexible rear wing for FG and Carson / Smartech offroad cars, with reinforcement ribs on the underside.

€29.90*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

7058 FG Body screws with stop nuts, 15 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Allen head body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.60*

7058/01 FG Body screws Torx with stop nuts, 15 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Torx body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.90*

Alternatives

6154 FG Body Marder/Zenoah polycarbonate, clear

Genuine FG spare/option part. Body shell is delivered clear and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€124.95*

6156 FG Team ecals Marder/Zenoah - 1pce.

Standard Marder decals.Sheet dimensions:430 x 310 mm

€33.90*

Customers also viewed

FG Sportsline 2WD-530 with Audi R8 body shell, 23cm³ Engine HT-Edition

The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 535 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery   The body shell has four 9mm diameter holes provided by the body shell's manufacturer, which are not suitable for FG models. The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The Audi R8 is currently only available in a painted version with mirrors and rear spoiler.Dimensions: Length: 920 mm Width: 410 mm Height: approx. 250 mm Wheelbase: 535 mm The car comes with an unpainted body shell!HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EUR

From €1,299.90*

Configure now

TT1530/250 Top Tuning 5000 mAh LiPo battery 2S, 7,4V 60C

Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 3C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer.Dimensions: Length +/- 5 mm: 138 mmWidth +/- 1,5 mm: 47 mmHeight: +/- 1,5 mm: 24,5 mmWeight +/- 10g: 254gContents:1 piece

€49.90*

Configure now

60206 FG Off-Road Buggy wheel narrow, black, 2 pcs.

Item N° 60206 Off-Road wheel narrow, black, 2 pcs.Rims for FG Off-Road Buggy front.Diameter x width: 140 x 65 mm, 18 mm wheel square.

€24.95*

8073 FG Body set Alfa Romeo 156 WTCC, 1 mm clear

Genuine FG spare/option part.The body kit is supplied without rear spoiler! Required body mounts:Mount front: FG 7020/10 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 900 mmWidth: 400 mmHeight: 245 mmWheelbase: 535 mmContents:1 piecePainting tips:

€119.90* €179.50* (33.2% saved)

500304032D/2.0 Carson 1/5 Wild GP Drift Attack 2.4G RTR, 26cc engine, with all accessories

Carson Drift Attack 2.0 special equipment with 60 mm wide front and rear Narrow-Grip tires!The off-road tire for sandy surfaces and spectacular drifts!With the Carson Wild Attack almost everything for driving (!) is included! The only exception: The fuel mixture from the gas station. (Recommended oil for mixing: y0813/02).The model includes the completely installed 2.4 GHz remote control, incl. transmitter alkalines, as well as a fail-safe system (automatic engine cut-off in case of possible malfunctions!), 20kg throttle servo and 35 kg steering servo, as well as a 2.000 mAh 6V receiver battery with charger and a tool set. Furthermore a spare air filter element and a special mixing canister. A detailed multilingual manual is also included. At the end of the Page you will find an excellent, about 7 minutes duration introduction video to the Carson Wild Attack, which allows even the absolute novice for RC-Carswith combustion engine, the uncomplicated, problem-free entry: Technical details: approx. 70 km/h top speed0 - 70 km/h approx. 2.5 seconds With one tank of gas (700ccm) approx. 40 minutes driving time26cc engine, with pull starterSound reducing tuned pipe exhaust system2-shoe cltch with steel clutch bellA steel differential.Aluminium shocks, dust protectedDrift equipment F+H 60 mm widebead-lock rims with off-road tyresaluminium rim driveradjustable rear wingCompletely ballraced 2WD drivetrain Water protected receiver boxventilated double disc brakealuminium chassisFor driving, only the 2-stroke oil is needed for the fuel mixture.

€555.00* €891.80* (37.77% saved)

68501 FG 4WD conversion kit for 2WD Marder

Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set

€424.95*

6000c/2023 FG Marder Vintage-Classic with 26 ccm engine RTR

With complete RTR equipment y1382 Original Maxi-Pin 1/6 offroad competition tire The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder comes with completely installed remote control. Just fuel up, start the engine and drive off.Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

€849.90* €969.95* (12.38% saved)