Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

TT1028 Top Tuning High-performance fan 60 x 60 x 24 mm

Product information "TT1028 Top Tuning High-performance fan 60 x 60 x 24 mm"

Genuine Top Tuningspare/option part.

High performance fan as upgrade for various applications in electric models.

The size 60 x 60 x 24 mm can be swapped e.g. for the fan of the ZTW Beast 300A speed controller. For this particular application, M4x40 screws are required instead of the standard M4x30 screws due to the 9 mm taller fan.

The air flow is considerably higher than with the standard units!

The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements.

Technical data:

  • Dimensions: 60 x 60 x 24 mm
  • Operating voltage: 5 8.4 V
  • Current: 0.5A
  • Speed: 8,500 rpm @ 8.4 V
  • Air flow: 39.2 cfm
  • Connector: BEC female
  • Cable length: approx. 30 cm


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

32731 Brake cable clamp - 1 pce.

€4.90*

Average rating of 0 out of 5 stars

6138/01 FG Bowden cable holder for rear disk brake
Genuine FG spare/option part. Contents:1 piece

€5.30*

Average rating of 0 out of 5 stars

y0568 Bowden cable mount 1/5, 2 pcs.

€12.60*

Average rating of 0 out of 5 stars

Bowden cable, Baja premium brake, 1 pce., y0006
Sheath complete with core cable.Length: 315 / 395 mm

€15.90*

Average rating of 0 out of 5 stars

32787 Brake cable guide - 1pce.

€3.90*

Average rating of 0 out of 5 stars

6096 FG Shock retaining screw M5
Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*

Similar products

Average rating of 0 out of 5 stars

TT1027 Top Tuning High-performance fan 50 x 50 x 15 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 50 x 50 x 15 mm can be swapped e.g. for the fan of the ARRMA motor cooling unit or the fans of different speed controllers (e.g. ZTW Beast 200A). The ARRMA application requires approx. 5 mm longer screws due to the 5 mm taller fan (M4x25).The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 50 x 50 x 15 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 10,000 rpm @ 8.4 V Air flow: 28.3 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

TT1105 Top Tuning Motor cooling for FG brushless cars, short version.
Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins. Performance data of the fan: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 - 8.4 V Current: 0.5A Speed: 8.500 1/min @ 8.4 V Flow rate: 39.2 CFM Scope of delivery: Fan TT1028 Short fan mounting frame Protective grille for fan Adapter cable to JR connector Installation hardware

€44.90*

Average rating of 0 out of 5 stars

7911 FG Cooling fan for 7900, set
Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV.

€39.95*

Average rating of 0 out of 5 stars

66518 FG Alum.admission for cooling fan
Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV.

€16.90*

Average rating of 0 out of 5 stars

TT1026 Top Tuning High-performance fan 40 x 40 x 10 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size of 40 x 40 x 10 mm can be swapped e.g. for the fans of the FG motor cooling unit or the fans of various speed controllers.The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 40 x 40 x 10 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 16,000 rpm @ 8.4 V Air flow: 16.7 cfm Connector: Dupont 2-pin female (compatible with BEC/Futaba/Universal) Cable length: approx. 17 cm Contents:1 piece

€14.90*

Average rating of 0 out of 5 stars

7911/01 FG Cooling fan for 7900, 2 pcs.
Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV

€25.90*

Average rating of 0 out of 5 stars

ARA390296 ARRMA Motor Heatsink 4685 for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces

€21.99*

Average rating of 0 out of 5 stars

SPMXSEF4 Spektrum Firma Smart 160A w/ CP ESC Replacement Cooling Fan
Genuine Spektrum spare/option part. Contents:1 piece

€10.99*

Average rating of 0 out of 5 stars

TT1106 Top Tuning Motor cooling for FG brushless cars, long version.
Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins. Performance data of the fan: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 - 8.4 V Current: 0.5A Speed: 8.500 1/min @ 8.4 V Flow rate: 39.2 CFM Scope of delivery: Fan TT1028 Long fan mounting frame Protective grille for fan Adapter cable to JR connector Installation hardware

€44.90*

Average rating of 0 out of 5 stars

AKX018 GPM additional heat sink with fan for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:1 set

€39.90*

Average rating of 0 out of 5 stars

ARA390295 ARRMA Motor Fan Set 50mm for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 set

€22.99*

Customers also viewed

Average rating of 0 out of 5 stars

TT1106 Top Tuning Motor cooling for FG brushless cars, long version.
Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins. Performance data of the fan: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 - 8.4 V Current: 0.5A Speed: 8.500 1/min @ 8.4 V Flow rate: 39.2 CFM Scope of delivery: Fan TT1028 Long fan mounting frame Protective grille for fan Adapter cable to JR connector Installation hardware

€44.90*

Average rating of 0 out of 5 stars

TT1021/02 Top Tuning Motor clamps
tt_tt1021_02 Version: TT1021/02D - Diameter 70 mm+ 15EUR
Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Available with the following diameters:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard Baureihe 58Diameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kV, requires the taller TT1021/01B Top Tuning Motor mount for ZTW Beast motorDiameter 55,75 mmContents:1 piece

Variants from €29.90*
€44.90*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-465 Electric Porsche GT2, up to 200A
The 2WD-465 Sportsline electric model is based on a short chassis (465 mm wheelbase) with double wishbones Rear and front axles built. The vehicle is factory equipped with the 2-damper front axle.E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.In the unpainted version Version does not include a decal sheet!Features:The front axle of the GT2 was widened to 384 mm. The rear axle is 395 mm wide.Chassis short 465 with double wishbones on the rear and front axle completely assembled, ball bearings, differential gear, oil pressure shock absorber, multi-part unpainted polycarbonate body (item no. 05160L), white spoke rims, tires and tire inserts.T2M standard equipment brushless motor and ESC, 6S - 150A controller up to 3-6S  - brushless motor 6S You can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8S The model is also available in our shop selection including complete RTR equipment! RTR features RTR = Ready to Run. The RTR version is delivered ready to drive and with the 2.4 GHz remote control installed.Decor set: selectable (included in the painted version)LiPo batteries and the appropriate charger are required for all versions of the electric models. We recommend using LiPo batteries with a maximum length of 150mm and a width of 50mm to ensure trouble-free installation. The model is supplied with an EC8 connector system.

From €1,199.95*

Average rating of 0 out of 5 stars

8496/02 FG Adjustment screw - 2pcs.
Item N°8496/02 Adjustment screw - 2pcs.Spare part for .Total length: 23 mmThread: M5Pin: 4 mmPart is delivered in silver or black color from vendor!

€5.90*

Average rating of 0 out of 5 stars

2020-18 Mecatech Adjustable 3 Shoe Clutch
Genuine Mecatech spare/option part. This completely new developed adjustable clutch fits by default in combination with the Mecatech and Genius clutch bells. But combined with a special washer it can also be used on other brands.The shoes in this clutch are mounted in the direction of rotation (reverse), similar to other actual clutch designs.It is of course possible adjust this clutch to engage at different rpm's. The clever design of this clutch makes it very easy to disassemble and adjust the clutch. This requires only 2 separate tools.The first tests in Italy have shown that even after 2 hours of continuous driving, the clutch acts more smooth and precise compared to others. Furthermore the engagement remains very stable and the wear was negligibleContents:1 piece

€149.90*

Average rating of 0 out of 5 stars

HW30104002 Hobbywing Ezrun MAX4-HV ESC Sensored 300 Amp, 6-12s LiPo, BEC 10A
The Ezrun Max4 controller is suitable for particularly large 1:4 and 1:5 scale models. This controller is ideal for use in any of these models, whether heavy-duty off-roaders or trucks. It is the ideal choice for high-end models that are subject to high demands or are operated aggressively.  Despite the enormous size, care was taken to use high-quality and, above all, durable materials in the construction. This can be seen, for example, in the fact that the Max4 controller is excellently protected against dust, water and similar external influences. The electronic switch is also optimally protected against damage that could otherwise occur during a normal ride. In addition, the Ezrun Max4 has a built-in super high-current BEC that can provide a maximum output power of up to 25A. The output voltage can therefore be switched between 6V, 7.4V and 8.4V. The high-current BEC was developed to supply the latest high-current servos with sufficient power on request and thus to be able to precisely control the appropriate large models.  Features - Super-strong switch mode BEC with a constant current of 10A, instant 25A and the ability to switch between 6, 7.4 and 8.4V - Fireproof circuits to protect the battery connector - Additional built-in protection mechanisms: undervoltage, overheating, signal loss, ... - Versatile programmability - Real-time data recording Technical data: Current (continuous/short) 300A / 2000A Motor type: Sensor/sensorless brushless motors Motor limit: 12S LiPo: kV <= 600 (70125 size) LiPo cells: 6-12S BEC: 6V / 7.4V / 8.4V with 10A (switchable) Fan: Yes (supply via built-in BEC) Programming input: Fan / PRG input Programming: LED programming card, LCD programming box, OTA programming module Size: 125x85x61.7mm Weight: 775.4g Application: 1/4 and 1/5 Heavy Duty-Off-Road, Trucks 

€335.00*

Average rating of 0 out of 5 stars

TT1027 Top Tuning High-performance fan 50 x 50 x 15 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 50 x 50 x 15 mm can be swapped e.g. for the fan of the ARRMA motor cooling unit or the fans of different speed controllers (e.g. ZTW Beast 200A). The ARRMA application requires approx. 5 mm longer screws due to the 5 mm taller fan (M4x25).The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 50 x 50 x 15 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 10,000 rpm @ 8.4 V Air flow: 28.3 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€17.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency