EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

6106/08 FG Dowel pins for wheel square

€3.20*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6106_08
EAN: 3410564506417

Product information "6106/08 FG Dowel pins for wheel square"

Genuine FG spare/option part.

Dimensions:
  • Diameter: 3 mm
  • Length: 16 mm


Contents:
  • 4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Customers also bought

68535 FG Conversion kit Sportsline 2WD 510 touring car to 4WD
68535 FG Conversion kit Sportsline 2WD 510 touring car to 4WD
For converting the Sportsline 2wd 510 touring car into a model with 4WD drive.  The conversion kit contains all chassis parts and drive parts required for the conversion.Attention!Only suitable for new FG Sportsline 510 models with vertical engine and new fronr axle with housing.Not suitable for older FG Sportsline models with horizontal engine.

€189.50*
69251/01 FG Plastic front axle housing, right, 2WD/4WD, 1:5
69251/01 FG Plastic front axle housing, right, 2WD/4WD, 1:5
Genuine FG spare/option part. Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€23.90*
69250/01 FG Plastic front axle housing, left, 2WD/4WD, 1:5
69250/01 FG Plastic front axle housing, left, 2WD/4WD, 1:5
Genuine FG spare/option part.Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€23.90*
6451/04 FG O-rings for air filter adapter 19x1,5 und 57x2,5mm - 2pcs.
6451/04 FG O-rings for air filter adapter 19x1,5 und 57x2,5mm - 2pcs.
These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.

€3.90*
6728/03 FG Allen Grub screw M3x3 mm, 15 pieces
6728/03 FG Allen Grub screw M3x3 mm, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.20*
y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Similar products

6113 FG Wheel nuts M6 self-locking
6113 FG Wheel nuts M6 self-locking
Genuine FG spare/option part.Self locking wheel nuts with serrated base.Part is delivered in silver or black color from vendor!Contents:10 pieces

€7.30*
6096 FG Shock retaining screw M5
6096 FG Shock retaining screw M5
Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*
y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*
6106/07 FG Wheel square 11,5mm - 2pcs.
6106/07 FG Wheel square 11,5mm - 2pcs.
Wheel squares with 3 mm dowel pins. The pins prevent the squares from damaging the rims under high load. For all FG rims, holes may have to be drilled.11,5mm wide.Bore diameter 8 mm18 mm square

€23.90*
y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*
6100/04 FG Turnbuckle left/right M8/40mm
6100/04 FG Turnbuckle left/right M8/40mm
Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€10.95*
6107 FG Wheel square 9,5mm/M6
6107 FG Wheel square 9,5mm/M6
Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 9,5 mm Width: 17 mmBore: 8 mmContent:1 pieces:

€15.90*
6107/02 FG wheel square 17 mm/M6
6107/02 FG wheel square 17 mm/M6
Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 18 mm Width: 17 mmBore: 8 mmContents:2 pieces

€16.90*
6100 FG Front wishbone 2WD
6100 FG Front wishbone 2WD
Genuine FG spare/option part. Standard plastic wishbone for all 2WD FG off road models except Leopard race and monster/stadium models with dual shock axles.Contents:1 piece

€17.50*
6094/01 FG Damper spring rear 2,2 x 100 mm
6094/01 FG Damper spring rear 2,2 x 100 mm
Genuine FG spare/option part. Suitable for 6083 and 6481.Dimensions:Length: 100 mmWire diameter: 2,2 mmOuter diameter: 25 mmContents:1 piece

€7.90*
6115 FG Wheel nuts M8 with clamping
6115 FG Wheel nuts M8 with clamping
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Contents:10 pieces

€6.90*
6104 FG Front axle shaft, 55mm - 1pce.
6104 FG Front axle shaft, 55mm - 1pce.
Genuine FG spare/option part. Suitable for all FG models. Only useable with 9,5mm square driver.Diameter 8 mm.Contents:1 piece

€6.50*

Customers also viewed

68535 FG Conversion kit Sportsline 2WD 510 touring car to 4WD
68535 FG Conversion kit Sportsline 2WD 510 touring car to 4WD
For converting the Sportsline 2wd 510 touring car into a model with 4WD drive.  The conversion kit contains all chassis parts and drive parts required for the conversion.Attention!Only suitable for new FG Sportsline 510 models with vertical engine and new fronr axle with housing.Not suitable for older FG Sportsline models with horizontal engine.

€189.50*
6114 FG Wheel nuts M6 with clamping
6114 FG Wheel nuts M6 with clamping
Genuine FG spare/option part. These lug nuts ensure that you will never again lose a tire while driving. They are installed onto the axle shaft and secured by a set screw which goes through the wheel nut, tightened into the rim. This makes it almost impossible to lose such a wheel nut.Part is delivered in silver or black color from vendor!Contents:4 pieces

€37.95*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency