Samba 4160 FG Tuning pipe for FG off road 2WD/4WD models

Samba

€229.90*

Prices incl. VAT plus shipping costs

No longer available

This product is no longer available.

Product number: samba_4160

EAN: 4058575029137

This is the successor of the product:

Samba 4110 for Off-Road and monster models 2WD/4WD tuned pipe

€199.90*

Continue to product

Product information "Samba 4160 FG Tuning pipe for FG off road 2WD/4WD models"

Tuned pipe exhaust system for racing, fits near all FG 4WD Off-Road and Monster models from the top manufacturer of high performance exhaust systems.
Top quality and optimized performance througout the entire engine's RPM range.

Complete set with steel manifold and hardware for sealing and installation.

Fits:

FG Baja Buggy 2WD/4WD
FG Marder 2WD/4WD
FG Beetle 2WD/4WD
FG Monster/Stadium Truck 2WD/4WD
FG Monster/Stadium Hummer 2WD/4WD
FG Monster/Stadium Jeep 2WD/4WD

Can also be used for 530 mm wheelbase off-road Monster/Hummer and shorter wheelbases. Please note that modifications to the body shell are usually required.

Due to the increased performance we recommend the use of aluminum engine mounts.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y0393 Mounting wire for Samba pipes - 1pce.

Wire diameter 2.5 mm, cut and bend as needed.

€3.90*

y0376 Replacement spring for Samba manifolds - 2 pcs.

Measures:Total length: 55 mmLength of coils: 25 mmWire thickness: 1,25 mm

€4.90*

y0482 Anti-vibration spring hose elbow Samba, 2 pcs.

Protects against vibration and dirt which could jeopardize the spring. The spring is not protected by the rubber tube only, but also relieved.product contents: 2 pcs.

€3.90*

y0391 Replacement Viton o-rings for Samba manifolds

Genuine Samba spare/option part.Silikon, 20 x 25 x 2.5 mm, fits Masterfix and Steel PowerContents:4 pieces

€6.90*

2260 Samba spare parts kit

Genuine Samba spare/option part.Contents:2 x Replacement spring y03764 x O-ringe 20 x 24 x 2 mm

€15.30*

Samba 2261 spare parts kit

Includes:1 x Retaining wire y03931 x Hose clamp 28 - 39 mm1 x Grub screw M5x 6 mm

€16.90*

Samba 2263 spare parts kit

included:2 x Replacement spring y03764 x O-ringe 20 x 25 x 2,5 mm

€18.90*

7406/03, FG Spring for FG Steel Side Power, 1 pce.

€9.40*

Exhaust manifold Samba Big Belly / Sambaja, 4105, 1 pce.

€39.90*

y0564 RC Tech Pipe Protect 400 ml

Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml

Content: 400 Milliliter (€24.75* / 1000 Milliliter)

€9.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

Customers also viewed

Samba 4110 for Off-Road and monster models 2WD/4WD tuned pipe

Genuine Samba spare/option part.Samba announced this pipe as the monster model / Off-Road pipe, but it fits Beetle/Pajero/Monster Beetle/Monster Truck and 2WD/4WD FG models as well. Will fit Carson CPT as well with some minor modification to the body shell in the bed area.The large distance between pipe and tire is a big advantage especially for the Monster models. The mounting wire is already bent into the correct shape for easy installation.Complete system with steel manifold and hardware for installation included.Content:1 set

€199.90*

Details

6154/03 FG E-Marder body shell Zenoah

Genuine FG spare/option part. FG E-Marder body shell with decals but without window gitter.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€143.95*

6299 FG Steel-Power 1:6 Tuning pipe FG 2WD and 4WD Off-Road

Genuine FG spare/option part. Newly developed tuned pipe made of strong steel sheet, with plug connecting system. The pipe mounts close to the car for best protection possible and versatile usability. Suitable for:FG 2WD and 4WD 1:6 Off-RoadSmartech 2WD off-road And for many other brand's 1/6 carsNot suitable for:FG Leopard2 2+4 WD Sportsline and CompetitionOn several pictures the pipe is shown with a silicone tube tailpipe extension, which is not included. It can be ordered separately as an accessory with part number 6299/03 or y0995.Content:1 piece

€249.95*

7439/05 FG Alloy gear carrier 52mm special, 1 pce.

Item N° 7439/05 Alloy gear carrier 52mm special, 1 pce.Precision alloy gear carrier, exact support of the plastic gearwheels 39, 40, 41, 42 and 44 teeth. Very low height design. For 10 mm diameter shafts.Please note: competition layshaft 6041/05 is necessary for installation!

€39.50*

87564 HPI Shock repair kit for VVC/HD rear shocks Baja SS

Genuine HPI spare/option part. Dimensions: 137 - 207 mm.Contents:1 set

€75.00*

Details

9020/01 FG Front bumper for CLK-GTR

Genuine FG spare/option part. Passend für CLK-GTR.Length 120 mmWidth 405 mmContents:1 piece

€27.50*