SB011 GPM aluminum diff housing for Losi Super Baja Rey / 2.0 / Rock Rey

€39.90*

Prices incl. VAT plus shipping costs

Available

Unit

1 Piece

3 Pieces

Product number: gpm_sb011.1

EAN: 4894538301854

Product information "SB011 GPM aluminum diff housing for Losi Super Baja Rey / 2.0 / Rock Rey"

Genuine GPM spare/option part.

Diff housing for Losi Super Baja Rey / Rock Rey made by GPM, machined from high grade 6061-T6 aluminum. Fits front, center and rear application. Much stronger and more heat resistant than the stock plastic parts.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

TT1040 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey / 2.0 and Super Rock Rey / plastic spindles

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fender wells will need some cutting.Please note: the wide rear wheels from MadMax or HPI do not fit!This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90*

TT1044 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey, 2.0 and Super Rock Rey / aluminum spindles

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey, Super Baja Rey 2.0 and Super Rock Rey. Suitable for 8 mm axles.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: These adapters only fit in combination with the optional aluminum spindles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which requires different dimensions for the wheel drives.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fenderwells will need some cutting. Please note: the wide rear wheels from MadMax or HPI do not fit! This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

y0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

€54.90*

SB030 GPM aluminum rear shock towers Losi super Baja Rey / 2.0 / Rock Rey

Genuine GPM spare/option part. GPM's aluminum rear shock tower for the Losi Super Baja Rey / Rock Rey is much more rigid than the standard plastic part. It offers an increased number mounting positions for the shock and therefore allows for a more precise setup. Contents:1 set

€69.90*

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

€23.90*

Details

SB022 GPM aluminum rear wheel bearing carriers for Losi Super Baja Rey / 2.0 / Rock Rey, 0°

Genuine GPM spare/option part. Rear wheel bearing carriers for Losi Super Baja Rey / Rock Rey, 0° toe-in (stock) made by GPM, machined from high grade 6061-T6 aluminum provide better fit for the bearings and therefore increase their life span.We recommend installing the ball bearings with a little dab of screw cement.Contents:2 pieces

€26.90*

y1541 Complete screws/nuts/washer set for Losi Super Baja Rey / Rock Rey

Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi Super Baja Rey.The set includes a total of 321 screws, in different quantities which are all used on the Losi Super Baja Rey / Rock Rey.6 sizes of cap head screws11 sizes of CSH screws13 sizes of button head screws6 sizes of set screws3 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:4 piecesM2x101 piecesM2,5x813 piecesM3x102 piecesM3x122 piecesM3x165 piecesM3x306 piecesM3x45 CSH screws in 10.9:5 piecesM2,5x86 piecesM3x66 piecesM3x1234 piecesM3x161 piecesM4x1010 piecesM4x122 piecesM4x149 piecesM4x166 piecesM4x1814 piecesM4x202 piecesM4x25Button head screws in 10.98 piecesM3x89 piecesM3x195 piecesM3x126 piecesM3x1616 piecesM3x204 piecesM3x304 piecesM3x3512 piecesM4x128 piecesM4x1618 piecesM4x2010 piecesM4x2512 piecesM4x301 piecesM4x35Grub screws:2 piecesM3x63 piecesM4x46 piecesM4x56 piecesM4x61 piecesM5x48 piecesM5x30Washers:Unterlagscheiben:5 piecesM3,25 piecesM4,34 pieces H5 Seeger HalfmoonSelf-locking nuts:4 piecesM335 piecesM4Nuts:2 piecesM45 piecesM5

€44.90*

This product is currently not available.

GPM SB055FRS-OC Front lower hinge pin plates for Losi Super Baja Rey / 2.0 / Rock Rey

Genuine GPM spare/option part. Front lower hinge pin plates from GPM for Losi Super Baja Rey / Rock Rey. Precision laser-cut from 3 mm stainless steel. Contents:2 pieces

€12.90*

SB010/+2MM GPM Axle extenders 2 mm Losi Super Baja Rey/ Rock Rey

Genuine GPM spare/option part. Axle extenders for Losi Super Baja Rey / Rock Rey, 2 mm per side (4 mm in total). 20 mm hexagon, matching the original rims. Since the driving pins are no longer completely secured by the rim when using axle extenders, special threaded bolts are used for this application.The set also includes closed wheel nuts to protect the outer edge of the thread.2 axle extenders2 threaded steel pins2 closed wheel nuts

€18.90*

SB170R/L/SP Replacement springs for rear GPM shock absorbers SBR/SRR

Original GPM Ersatz-/Tuningteil.Replacement springs for rear GPM shock absorbers SB170R/LAlso fits the stock Super Baja Rey/2.0/Super Rock Rey shocks. Compared to the 2.0 springs approx. 18% stiffer.9 coils2,6 mm wire thicknessapprox. 117 mm free length24 mm inner diameterInhalt:1 Stück

€9.90*

SB132F/SB170R GPM Front and Rear Piggyback Shock absorbers for Super Baja Rey (incl. 2.0)

Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod. Dimensions springs front: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs rear: 9 coils 2,5 mm wire thickness approx. 117 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 171 mm, compressed approx. 123 mm. Inhalt:2 pair / 4 pieces

€149.90*

Customers also viewed

SB011 GPM aluminum diff housing for Losi Super Baja Rey / 2.0 / Rock Rey

Genuine GPM spare/option part. Diff housing for Losi Super Baja Rey / Rock Rey made by GPM, machined from high grade 6061-T6 aluminum. Fits front, center and rear application. Much stronger and more heat resistant than the stock plastic parts.Contents:1 piece

From €39.90*

Details

SB100F/R/L GPM piggyback reservoir shock caps f/r Losi Super Baja Rey / 2.0

Genuine GPM spare/option part. The GPM piggyback reservoir shock absorber caps for the Losi Super Baja Rey fit front and rear shocks. They increase the oil volume and the separate vent screw makes filling the shocks easier.According to Horizon Hobby he stock oil in the Super Baja Rey shocks is very close to a 350 viscosity, and we recommend y0038 genuine silicone shock absorber oil for refilling or changing to other viscosities. A 50 ml bottle will do all four shocks.Contents:2 pieces

From €39.90*

Details

GPM SLO5T 16/18/19/20/21 steel pinion incl. washer for Losi 5ive-T, 5ive-B and Mini

gpm_slo5t Teeth: SLO5T020T - 20 teeth+ 5EUR

Hardened steel pinion set for Losi 5ive-T, 5ive-B and Mini, with corresponding engine mount inserts included. All parts with laser etched tooth count.Please note: The pinion do fit the 5ive-T 2.0 as well, of course. However, you then have to use the 5ive-T 2.0 engine mount inserts of the appropriate tooth count, inserts from the 5ive-T do not fit! Available with 16, 18T/19T/20T/21T. The 19T pinion is stock equipment in Losi 5ive-T and Mini, 20T is stock in the 5ive-B.The 16T pinion is profile shifted and has the same dimensions as a normal 18T pinion.It is specially made for vehicles where the stock tires are replaced by much larger diameter rubber (i.e. monster truck tires and MadMax Giant Grip).Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.SLO5T018T replaces LOSB5046 and LOSB5805SLO5T019T replaces LOSB5044 and LOSB5801SLO5T020T replaces LOSB5045 and LOSB5802The higher the tooth count, the higher the top speed!

Variants from €39.90*

€44.90*

LOS252069 Losi Diff Housing & gasket, Super Baja Rey / 2.0 / Super Rock Rey

Genuine Losi spare/option part. Contents:1 piece

€8.99*

LOS254055 Losi Front Spindle carrier set L/R for Super Rock Rey

Genuine Losi spare/option part. Contents:2 pieces

€19.99*

LOS354013 Losi Front Spindle set Aluminium for Super Rock Rey

Genuine Losi spare/option part. With four bearings.Dimension ballbearings:Outer diameter: 16 mmInner diameter: 8 mmThickness: 5 mmContents:1 pair

€69.99*

Details