Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

OKS 2661 Fast cleaner / solvent, 600 ml spray can

Product information "OKS 2661 Fast cleaner / solvent, 600 ml spray can"

Modern active cleaner on a solvent base. Fast 100% evaporation of the cleaner, but not nearly as aggressive as the conventional brake cleaner.

Wash up the area to be cleaned from a short distance and rub with a cloth or similar. Then allow to dry for about 1 minute. Before use on plastics and coatings test them for chemical resistance.

Special note of the manufacturer:
  • Highly effective due to a workplace and environment-friendly, complex formulation of several actively cleaning substances. Excellently suited for cleaning all surfaces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

Expert gilmer belt for all FG 1/6 4WD cars, y1202, 1 pce.
Dimensions same as FG 66237with reinforced glas cord, polyamide fabric and polychloroprene backside. For all FG Offroad 4WD models with 490-510mm ( Offroad buggy, monster and stadium) and all FG Sportsline 4WD 510 ( Porsche GT3, Mini and BMW E30 ) leng 635mm, wedth 18mm.

€29.90*

Average rating of 0 out of 5 stars

y1203 HS gilmer belt for FG 4WD cars, 1 pce.
Dimensions same as FG 66237.Very high rupture strength and tearing resistance as well as reduced wear make this belt the perfect choicefor race applications where maximum reliability is a must.Fits cars with 490 and 510 mm wheelbase only. Does not fit WB535 cars! For all FG Offroad 4WD models with 490-510mm ( Offroad buggy, monster and stadium) and all FG Sportsline 4WD 510 ( Porsche GT3, Mini and BMW E30 ) leng 635mm, wedth 18mm.

€34.90*

Average rating of 0 out of 5 stars

10059 FG Toothed belt 148x16mm
Genuine FG spare/option part.Suitable for formula 1 cars only.Contents:1 piece

€27.90*

Average rating of 0 out of 5 stars

10060 FG Gilmer belt 150x20mm
Genuine FG spare/option part.Fits formula 1 cars only.Contents:1 piece

€27.90*

Average rating of 0 out of 5 stars

10061 FG Toothed belt 150x16mm - 1pce.
Fits formula 1 cars only.

€27.90*

Average rating of 0 out of 5 stars

66237 FG Gilmer belt 4WD, wheelbase 510 mm
Genuine FG spare/option part. Contents:1 piece For all FG Offroad 4WD models with 490-510mm ( Offroad buggy, monster and stadium) and all FG Sportsline 4WD 510 ( Porsche GT3, Mini and BMW E30 ) leng 635mm, wedth 18mm.

€54.90*

Average rating of 0 out of 5 stars

66237/01 FG Gilmer belt 15mm, 530/535 long, 1 pce.
Item N° 66237/01 Gilmer belt 15mm, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1 pce.

€54.90*

Average rating of 0 out of 5 stars

69237 FG Toothed belt 12mm, 510, 1pce.
Item N° 69237 Toothed belt 12mm, 510, 1pce.

€31.50*

Average rating of 0 out of 5 stars

OKS 2901 Belt tuning spray 400 ml, 1 pce.
The maintenance can for all cars with a belt drive.Clean, light-coloured film for increasing tensile strength and care of many kinds of belts.Increases tensile force by up to 50 % for all kinds of V-belts, round and flat belts. Protects against drying out and wear, prevents belt squeaking and slip.

Content: 400 Milliliter (€62.25* / 1000 Milliliter)

€24.90*

Alternatives

Average rating of 0 out of 5 stars

y0042 Brake cleaner 600 ml, 1 pce.
Fast and thorough cleaning action, acetone-free!Removes lining abrasion, grease, oil, brake fluid, dirt and more. Cleans metal, glass, ceramics a.s.o.. Prevents dispersal of harmful abrasive dust. Spray parts until dirt and grease are washed away or wipe with a clean cloth.Also for degreasing gluing spots ...Content: 600 ml spray can.

Content: 600 Milliliter (€11.50* / 1000 Milliliter)

€6.90*

Similar products

Average rating of 0 out of 5 stars

04.0169 INNOTEC Power Clean metal and especially aluminum cleaner, 500 ml can
Special cleaner for aluminumPower Clean is a safe, fast-acting cleaner/degreaser for almost all types of contaminated metal parts and surfaces. The product removes brake dust, tar, undercoating, grease and various waxes and any type of contamination. Power Clean is a non-hazardous cleaner for electronic brake and ABS systems. Since the product does not attack the substrate, it is also particularly suitable for removing tar splashes and grease and oil stains.Power Clean evaporates completely without leaving any residue. Another major advantage is that the product does not cause white efflorescence on aluminum parts, as is the case with most brake cleaners. Thus, Power Clean is the perfect product for cleaning clutch and engine parts. The product comes out of the spray can at high pressure, making it easy to clean hard-to-reach places. In the spray can, Power Clean is particularly user-friendly and practical to use. Highlights .  span> harmless to aluminum. div>  span> High spray pressure, therefore suitable for heavily accessible places. div>  span> leaves no residues Content base: aliphatic hydrocarbons Density: 733 kg / m³ Consistency: liquid (firefitted in the aerosol can) viscosity: 2 mPa.s li> solvent: aliphatic hydrocarbons Flash point: 0 ° C Evaporation Residue: Maximum 4% Processing conditions: + 10 ° C to + 30 ° C SURFACES.Almost all types of metal, paints and plastics. Before use on plastics and paints, always test on an inconspicuous area. USAGESpray product on the parts to be cleaned and leave to act briefly. Re-spray to completely remove loosened dirt. Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F

Content: 500 Milliliter (€19.80* / 1000 Milliliter)

€9.90*

Average rating of 0 out of 5 stars

y0523 Special cleaner for foam air filters, 500 ml
Genuine rc-car-online spare/option part. Foam-Cleaner, special cleaning agent for foam air filter elements and GPM coverThe foam-Cleaner is specially designed for RC foam air filters, as well as covers for starter, filter and shocks. Removes reliably dirt, mud, dust, old filter oil, and sand particles and ensures optimum air flow. After cleaning please oil the air filter with air filter oil with order-no. y0284 for foam filters before re-use. Routinely cleaning of filters protects against premature wear and extends engine life!Use: apply cleaner to filter/cover, wait for some minutes and rinse with warm water. Let the parts dry before re-use.Bottle with 500 ml.Contents:1 piece

Content: 500 Milliliter (€19.90* / 1000 Milliliter)

€9.95*

Average rating of 0 out of 5 stars

04.0107 INNOTEC Adhesive remover and degreaser, 500 ml can
Adhesive and Seal RemoverSeal and Bond Remover is a slow evaporating universal degreaser that is also perfect for quickly and efficiently removing all types of adhesive and sealant residue. The product softens most adhesives and sealants to make them easier to remove.Seal and Bond Remover is suitable for all types of metals and most plastics. In addition, it can be used without risk on almost all modern paints. This makes it particularly suitable for removing stickers, emblems, bumper trims and any adhesive residue that may remain. Even traces of sealant and adhesive after dismantling brackets, etc. can be safely removed without damaging the substrate. Seal and Bond Remover is also ideal for making surfaces free of grease and silicone, for example before applying new stickers, emblems, etc.Due to its high dissolving power, Seal and Bond Remover is also a recommended solution for removing tar splashes or even rubber from trim, etc.In the spray can, Seal and Bond Remover is particularly user-friendly and practical to use. Thanks to the unbreakable nozzle with spray tube, even hard-to-reach places are easy to reach. In addition, the spray can has a special valve that allows it to be used in any position. This allows emblems and bumper strips, among other things, to be removed most effectively by spraying Seal and Bond Remover directly behind the part in question while slowly pulling it off. HIGHLIGHTS. Very easy to use. Ideal for removing adhesive, tar, sealant and chewing gum residues Significantly facilitates the cutting out of glued car windows. Does not attack paint or most plastics in any way OEM approved CONTENT Base: Mixture of aliphatic and aromatic hydrocarbons. Density: 762 kg/m³ Consistency: liquid (ready to spray in aerosol can) Viscosity: ± 2 mPa.s Solvent: mixture of aliphatic and aromatic hydrocarbons. Flash point: 0°C Evaporation residue: None, the product dries without residue. Processing conditions: +10°C to +40°C Substrate: The most common substrates. If necessary, test in an inconspicuous place. USAGE.Shake spray can well before use. Spray Seal and Bond Remover on the surface to be treated and allow to act briefly. Remove adhesive, tar, sealant, chewing gum residues with a Multi Wipe. Wipe off with a clean, dry cloth or Multi Wipe. For thicker layers, remove the top layer first and then repeat the treatment. Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F Details: OEM approval

Content: 500 Milliliter (€39.80* / 1000 Milliliter)

€19.90*

Average rating of 0 out of 5 stars

04.1115 INNOTEC Multi Clean Universal foam cleaner for all plastic and metal parts on the RC car, 600 ml can
Universal Foam Cleaner div>Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants.Multi Clean is therefore ideal for cleaning your RC cars. Through the foam shape, Multi Clean, including the ideal product, is to liberate zbdachhimetal cladding of nicotine approaches or stains as a result of assembly work.Also on transparent plastic parts, Multi Clean achieves a perfect cleaning effect in combination with Power Clean [Link] Inno_040169: Power Clean [Endrink] without damaging damage occurring when using scrubbing agents. Multi Clean is a universal cleaner because it does not attack glass or paint or plastic. In addition, the product is free of silicone, which would make any further treatment with wax or the like. Due to foaming, Multi Clean is highly productive and last but not least through the pleasant smell. In the spray box and foaming, Multi Clean is especially user-friendly and application practical. Even wipeing will be for pleasure because the product does not leave a strip. This makes it difficult to treat hard-to-reach sites. Highlights  span> Easy application  span> versatile  span> stable foaming, thus longer exposure period  span> cleans to deep into the fibers  span> harmless for plastic, rubber, fabric, leather, glass, pmma, aluminum, varnish etc div>  span> leaves no stripes  span> spread a pleasant fresh smell CONTENTS Base: Mixture of surfactants, glycol ethers and paraffin oils in water Density: 975 kg / m³ Consistency: White foam solvent: glycol ether and water Flash point: 0 ° C foam stability: very good Processing conditions: + 5 ° C to + 30 ° C Underground: The most common surfaces, such as fabric covers, aluminum, leather, wood, paints andVarious plastics nobr> USESpray can shake well before use. Spray Multi Clean on the surface to be treated and have a brief. Then wipe the surface with a clean, dry cloth (Innotec Multi Wipe or Inno-Cleaner). For coarser surfaces Multi Clean possibly rubbing after spraying with a soft brush and then rub dry with a clean, dry cloth. With bonded panels, it is advisable not to spray the product in a large amount directly on the surface, but to apply and retract with a clean cloth. If necessary, test in advance at an unobtrusive place.Hands-Cleaning: with Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and Water Shelf life: 2 years in unopened original packaging Storage conditions: Cooling and dry Store Batchcod Type: F

Content: 600 Milliliter (€24.83* / 1000 Milliliter)

€14.90*

Average rating of 0 out of 5 stars

y0816 Motul Shine&Go
Genuine Motul spare/option part. Motul Shine&Go, a silicone based care for all metal and plastic parts. Protects the surfaces with a long term non-stick protective film, helping to prevent dirt, grime, tire rubber and dust from adhering. Once applied after cleaning the model, dirt can be removed much easier next time.Contents:1 piece

Content: 400 Milliliter (€32.25* / 1000 Milliliter)

€12.90*

Average rating of 0 out of 5 stars

y0751 K&N Filter cleaner 946 ml
Genuine K&N spare/option part. K&N Power Kleen is a high-performance cleaner and degreaser used to remove road grime, engine exhaust and grease from cotton air filters. It is now formulated to clean those troublesome and demanding cleaning jobs. This cleaner is specially formulated to remove oil, lubricants, grease, grime, and other deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more! Genuine K&N air filter cleaner,especially formulated for cleaning cotton air cleaners.Content:946 ml / 32 OZ

Content: 946 Milliliter (€16.17* / 1000 Milliliter)

€15.30*

Average rating of 0 out of 5 stars

y0564 RC Tech Pipe Protect 400 ml
Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml

Content: 400 Milliliter (€24.75* / 1000 Milliliter)

€9.90*

Average rating of 0 out of 5 stars

WD-40 Smart Straw Multi function oil
With the integrated spray head can be changed between large-scale and precise spraying. The tube remains firmly at the spray head and is therefore no longer lost in the application. For surface spraying, the spray tube is simply folded down. With unfolded spray tube you can reach small spaces and can apply the product exactly accurately. Due to the 360 ​​° valve, the can can be maintained upright or overhead, so every application is possible.Protects against corrosion:Thanks to its corrosion-resistant formula, it offers long-lasting protection against rust and all forms of oxidation on metal surfaces.Temperature range: -50 to +150° C Eliminates squealEines der Hauptkomponenten ist ein aktives Schmiermittel, welches die Gängigkeit beweglicher Teile erleichtert und gleichzeitig Quietschen und Knarren beseitigt. Darüber hinaus schmiert es Teile und Mechanismen. Displaces moistureThe WD-40 multifunction product forms a perfect barrier against moisture by adding it. Thus, electrical and electronic mechanisms are always protected and creep currents are avoided. Cleans and protectsSolves stubborn dirt, oil, fat and adhesive residue and lets you easily remove. Leaves a nourishing protective layer. Loosens rusted partsLoosens stuck mechanics and jammed metal parts by infiltrating rust layers to loosen them. WD-40® multifunction product infiltrates and loosens rusted and fixed screws. It penetrates in hinges into the thread and protects against corrosion. WD-40® multifunction product displaces moisture, lubricating and eliminating squeaking. >PRODUCT PERFORMANCE AND FEATURES: Eliminates squeaks Undercuts moisture, resin, tar and dirt Cleans and protects against corrosion Loosens rusted parts Loosens stuck mechanics, rusted bolts and nuts Removes dirt and lubricates all types of tools Silicone, resin and PTFE free >MATERIAL COMPATIBILITY: GENERAL: Virtually all materials react to WD-40® Multifunction Product in the same way as they do to other high-quality aliphatic solution benzenes under the same conditions of exposure, such as spraying, short or even prolonged immersion. WD-40® multifunction product does not contain silicone, PTFE or chlorofluorocarbons. RUBBER: No visible effects on the surface of various types of rubber that have been sprayed with WD-40® Multifunction Product. Certain types of rubber swell when immersed in WD-40® Multifunction Product for extended periods of time. STRENGTHENED STEEL (for hydrogen embrittlement): Rated SAFE according to the Lawrence Hydrogen Effusion Test. FABRIC:WD-40® multi-function product causes no visible effect except slight discoloration that can be easily removed with naphtha or dry cleaning solvent (Tested: Nylon, Orlon, Wool, Dralon, Cotton). PAINTED SURFACES: Many types of paint on various surfaces have been exposed to WD-40® Multifunction Product without observing an effect. Wax polishes and certain wax coatings may be softened by WD-40® Multifunction Product. PLASTICS: Die folgenden Kunststoffe wurden 168 Stunden lang in WD-40® Multifunktionsprodukt eingetaucht ohne sichtbaren Effekt: The following plastics have been immersed in WD-40® Multifunction Product for 168 hours with no visible effect: polyethylene - Formica - epoxy - Delrin - polypropylene - acrylic - vinyl - polyester - nylon. Clear polycarbonate and polystyrene may develop hairline cracks or larger cracks when in contact with WD-40® multifunction product. > APPLICATION: Shake well before use. Hold can upright, tilted or upside down when spraying. IMPORTANT: Disconnect power from power tools, equipment and other live parts before spraying.

Content: 200 Milliliter (€39.90* / 1000 Milliliter)

€7.98*

Average rating of 0 out of 5 stars

y0502 Compressed air spray - flammable - 400 ml, 1 pce.
Compressed air spray for cleaning and dusting your model cars. With the long nozzle tube it is well suited for cleaning hard to reach areas. For example you can get between differential and engine or behind the gear plate without disassembly.

Content: 400 Milliliter (€17.25* / 1000 Milliliter)

€6.90*

Average rating of 0 out of 5 stars

y1395 Genuine LOCTITE 7063 cleaner
The ideal cleaner for pretreatment of Lexan body shells when are to be applied! Decals or detailing kits will stick significantly better to a body shell cleaned with LOCTITE 7063. Also great for removal of "battle scars" from the body shell. But note: The cleaner should not come in contact with the printed surface of the decals!Use to prepare surfaces to be bonded. The product flashes off very quickly and it allows cleaning directly prior to adhesive/sealant application. It is non-corrosive and non toxic.Application:Spray a sufficient amount of product on the surface to be cleaned and wipe while still wet to ensure heavy contamination and excess solvent is removed.Content:400 ml

Content: 400 Milliliter (€37.25* / 1000 Milliliter)

€14.90*
%

Average rating of 0 out of 5 stars

y1596 INNOTEC Allround Complete Set
Genuine INNOTEC spare/option part. The RC-car all-round wellbeing set for cleaning, sealing and moisture displacement. Set contents: INNOTEC PE100 silicone spray for plastic and rubber care PE100 was specially developed to protect plastics from external agents. The product penetrates right into the molecular structure of the plastic, which is thus protected from the inside out, remains permanently supple and retains its natural gloss. Content 500 ml Can INNOTEC Multi Spray 1000, moisture displacing lubricant Multi Spray 1000 is a strong moisture displacing lubricant that loosens stuck parts and protects against corrosion. Multi Spray 1000 displaces moisture by penetrating between the substrate and water and then protecting the substrate like a protective film. The product is ideal for numerous applications in the RC hobby. Content 500 ml Can INNOTEC Adhesive remover and degreaser Seal and Bond Remover is a slow evaporating universal degreaser that is also perfect for quickly and efficiently removing all types of adhesive and sealant residue. The product softens most adhesives and sealants to make them easier to remove. Content 500 ml Can INNOTEC Power Clean Metall- und insbesondere Aluminium Reiniger Power Clean ist ein sicherer, schnell wirkender Reiniger/Entfetter für fast alle Arten verunreinigter Metallteile und -flächen. Das Produkt entfernt Bremsstaub, Teer, Unterbodenschutz, Fett und diverse Wachse und jede Art von Verschmutzung. Power Clean ist ein ungefährlicher Reiniger für elektronische Brems- und ABS-Systeme. Da das Produkt den Untergrund nicht angreift, eignet es sich auch besonders zum Entfernen von Teerspritzern sowie Fettund Ölflecken. Content 500 ml Can INNOTEC Multi Clean Universal foam cleaner for all plastic and metal parts on the RC car Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants. Content 600 ml Can Set consists of:5 Dosen

€59.90* €76.90* (22.11% saved)

Average rating of 0 out of 5 stars

y0042 Brake cleaner 600 ml, 1 pce.
Fast and thorough cleaning action, acetone-free!Removes lining abrasion, grease, oil, brake fluid, dirt and more. Cleans metal, glass, ceramics a.s.o.. Prevents dispersal of harmful abrasive dust. Spray parts until dirt and grease are washed away or wipe with a clean cloth.Also for degreasing gluing spots ...Content: 600 ml spray can.

Content: 600 Milliliter (€11.50* / 1000 Milliliter)

€6.90*

Customers also viewed

Average rating of 0 out of 5 stars

y0042 Brake cleaner 600 ml, 1 pce.
Fast and thorough cleaning action, acetone-free!Removes lining abrasion, grease, oil, brake fluid, dirt and more. Cleans metal, glass, ceramics a.s.o.. Prevents dispersal of harmful abrasive dust. Spray parts until dirt and grease are washed away or wipe with a clean cloth.Also for degreasing gluing spots ...Content: 600 ml spray can.

Content: 600 Milliliter (€11.50* / 1000 Milliliter)

€6.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency