Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

WD-40 Smart Straw Multi function oil

Product information "WD-40 Smart Straw Multi function oil"

wd_49660_1650443363625fc463e6d44.jpg

With the integrated spray head can be changed between large-scale and precise spraying. The tube remains firmly at the spray head and is therefore no longer lost in the application. For surface spraying, the spray tube is simply folded down. With unfolded spray tube you can reach small spaces and can apply the product exactly accurately. Due to the 360 ​​° valve, the can can be maintained upright or overhead, so every application is possible.

Protects against corrosion:
Thanks to its corrosion-resistant formula, it offers long-lasting protection against rust and all forms of oxidation on metal surfaces.

Temperature range: -50 to +150° C



Eliminates squeal

Eines der Hauptkomponenten ist ein aktives Schmiermittel, welches die Gängigkeit beweglicher Teile erleichtert und gleichzeitig Quietschen und Knarren beseitigt. Darüber hinaus schmiert es Teile und Mechanismen.

Displaces moisture

The WD-40 multifunction product forms a perfect barrier against moisture by adding it. Thus, electrical and electronic mechanisms are always protected and creep currents are avoided.

Cleans and protects

Solves stubborn dirt, oil, fat and adhesive residue and lets you easily remove. Leaves a nourishing protective layer.

Loosens rusted parts

Loosens stuck mechanics and jammed metal parts by infiltrating rust layers to loosen them.


WD-40® multifunction product infiltrates and loosens rusted and fixed screws. It penetrates in hinges into the thread and protects against corrosion. WD-40® multifunction product displaces moisture, lubricating and eliminating squeaking.

>PRODUCT PERFORMANCE AND FEATURES:
  • Eliminates squeaks
  • Undercuts moisture, resin, tar and dirt
  • Cleans and protects against corrosion
  • Loosens rusted parts
  • Loosens stuck mechanics, rusted bolts and nuts
  • Removes dirt and lubricates all types of tools
  • Silicone, resin and PTFE free


wd_49660_1650446526625fd0beb9b63.png

>MATERIAL COMPATIBILITY:
  • GENERAL: Virtually all materials react to WD-40® Multifunction Product in the same way as they do to other high-quality aliphatic solution benzenes under the same conditions of exposure, such as spraying, short or even prolonged immersion. WD-40® multifunction product does not contain silicone, PTFE or chlorofluorocarbons.
  • RUBBER: No visible effects on the surface of various types of rubber that have been sprayed with WD-40® Multifunction Product. Certain types of rubber swell when immersed in WD-40® Multifunction Product for extended periods of time.
  • STRENGTHENED STEEL (for hydrogen embrittlement): Rated SAFE according to the Lawrence Hydrogen Effusion Test.
  • FABRIC:WD-40® multi-function product causes no visible effect except slight discoloration that can be easily removed with naphtha or dry cleaning solvent (Tested: Nylon, Orlon, Wool, Dralon, Cotton).
  • PAINTED SURFACES: Many types of paint on various surfaces have been exposed to WD-40® Multifunction Product without observing an effect. Wax polishes and certain wax coatings may be softened by WD-40® Multifunction Product.
  • PLASTICS: Die folgenden Kunststoffe wurden 168 Stunden lang in WD-40® Multifunktionsprodukt eingetaucht ohne sichtbaren Effekt: The following plastics have been immersed in WD-40® Multifunction Product for 168 hours with no visible effect: polyethylene - Formica - epoxy - Delrin - polypropylene - acrylic - vinyl - polyester - nylon.


Clear polycarbonate and polystyrene may develop hairline cracks or larger cracks when in contact with WD-40® multifunction product.

> APPLICATION:

Shake well before use. Hold can upright, tilted or upside down when spraying. IMPORTANT: Disconnect power from power tools, equipment and other live parts before spraying.


0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y1434 VL32 Multi Oil Pen for RC-Car sport
Universal maintenance oil which has a high resistance to environmental influences; it is penetrating and moisture displacing with an excellent corrosion protection. Precise application is possible with the VL32 - Multipen's metal syringe tip. The ergonomic shape and rubberized handle provide a secure grip. Leakage of oil is prevented by the safety valve in the cap. Application: u> b>Pull off cap (avoiding strong pressure on the pen!), position the pen to the point of lubrication and press. Refit cap after use.Content:12 ml / 1 piece

Content: 12 Milliliter (€741.67* / 1000 Milliliter)

€8.90*

Average rating of 0 out of 5 stars

y0113/01 Thread locking compound,medium
kleb_0005 Strength: y0113/01 Medium
Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 20 Gramm (€395.00* / 1000 Gramm)

€7.90*

Average rating of 0 out of 5 stars

03.1104 INNOTEC PE100 silicone spray for plastic and rubber care, 500 ml can
Special plastic cleanerPE100 was specially developed to protect plastics from external agents. The product penetrates right into the molecular structure of the plastic,which is thus protected from the inside out, remains permanently supple and retains its natural gloss.Most RC cars have various axle parts, such as control arms and bearing blocks made of plastic. Due to weather influences and especially UV rays,or contact with tire conditioners can cause the plastic to become brittle and weather over time.Especially with unpainted plastic, this process progresses relatively quickly. PE100 slows down this process and provides intensive protection,which significantly extends the life of the plastic. Also, the likelihood of seals and protective rubbers (e.g. bellows for drive parts) becomingbecome brittle are much lower.In addition to this protective effect, PE100 gives the plastic parts a fresher appearance. PE100 is also excellent for protecting electronic parts frommoisture in electronic parts. Das Produkt bildet eine wasserverdrängende Schicht und verbessert somit den Korrosionsschutz.In the spray can, PE100 is particularly user-friendly and practical to use. Thanks to the special nozzle with tube supplied, even difficult-to-reach areas can be treated effortlessly. Highlights H3>  span> clear, almost invisible fluid div>  span> Easy application div>  span> displaces moisture div>  span> Long-term effect div>  span> protects plastics against discoloring div>  span> holds rubber parts supple and prevents them freeze div>  span> protects ignition systems from moisture-related disorders div> div>> CONTENTS base: silicone oils, mineral oils and additives Density: 710 kg / m³ Consistency: liquid (firefitted in the aerosol can) viscosity: ± 15 mPa.s li> Flash point: 0 ° C compressive strength: minimal li> temperature resistance: -20 ° C to> 150 ° C li> water resistance: good li> acid resistance: resistant to dilute acids li> corrosion protection: good. Corrosion protection results from the formation of a water-displaced layer. Inputs: good li> lubricant content: 17% li> Processing conditions: + 5 ° C to + 40 ° C Underground: Most plastics, rubber and metal USAGEPreparation of the substrate: Provide a clean, dry, grease-free and non-corroded substrate.Shake can well before use. When used as a lubricant, spray the product directly onto the part to be lubricated. When used as a plastic and rubber protector, spray the product directly (spray distance 15-20 cm) or apply with a cloth or sponge. To achieve a beautiful shine, briefly polish the plastic with a clean, dry Multi Wipe. Material cleaning: With Innotec Multisol or Innotec Power Clean Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F

Content: 500 Milliliter (€31.80* / 1000 Milliliter)

€15.90*

Customers also viewed

Average rating of 0 out of 5 stars

y1137/04 GPM-Big Bore Premium shock absorber for FG Monster/Stadium Truck 4WD, set
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled.  Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD: Monster Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle  Set contents: Four long dampers with 5 mm mount in the upper damper caps. Damper feet one pair short, one pair long (4WD MT version).  We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers.  The original springs can also be used on FG models!  Silicone oil recommendation:  The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures.  If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended.  One 50 ml bottle of y0038 is sufficient for five long or six short dampers.

€149.90*
%

Average rating of 0 out of 5 stars

y0826 WET.PROTECT e-basic spray can, 50 ml
Reliable water protection for all electronic components.In model making too, WET.PROTECT protects and secures the functionality of precision mechanics and electronics of filigree electrical components and control units.Even out in the field and moisture and soddenness go into every little opening and every ever so narrow gap. With WET.PROTECT , moisture, splash water and rain have no chance to develop their destructive effects. WET.PROTECT protects with a single application against corrosion and moisture for at least one year, even during regular, intensive off-road use.A product, which is able to isolate metals to 100% against any wetness or humidity. Conventional contact sprays emulsify, therefore mix themselves with water, which provides a band aid solution, but no long-lasting operability, let alone real protection.WET.PROTECT goes completely between surface and water and isolates them by a hermetic and long lasting protective film.The conductivity is not impaired in any way, however corrosion and short-circuits are eliminated. Once applied, WET.PROTECT provides protection for up to one year.Technical details:Appearance:slightly brownish liquidOdor:Solvent-likeDensity at 20° C:0.6 kg / liter (canned)Flash point:Not measurable (aerosol)Ignition temperature:>250°CSelf-igniting:not self-ignitingSolubility in water:immiscible, non-emulsifyingLayer thickness:2 3 µmSurface resistance: 28 Terra Ohms (ISO93)Dielectric strength:208 KV/cm (normal case)The product is extremely economical in application. The more the better does not apply!Contents:1 piece / 50 ml

Content: 50 Milliliter (€238.00* / 1000 Milliliter)

€11.90* €12.90* (7.75% saved)

Average rating of 0 out of 5 stars

y1345 Drive pins, choice of sizes, e.g. for Losi, Mini and HPI cars
y1345 Size: y1345/04 - 5 x 24 mm
Genuine HT spare/option part. Hardened pins made of 100Cr6 steel for driveshafts, differentials, wheel drives and similar applications. Pack of ten. Sizes available:y1345/01: 4 x 18 mm, e.g. for Losi 5ive-T/Mini and HPI Baja differentials or HPI Baja layshafty1345/02: 4 x 20 mm, e.g. for Losi 5ive-T/Mini CVD jointsy1345/03: 4 x 24 mm, e.g. for Losi DBXL and HPI Baja wheel hexy1345/04: 5 x 24 mm, e.g. for Losi 5ive-T/Mini wheel hexContents:10 pieces

€4.90*

Average rating of 0 out of 5 stars

6441 FG Filter oil for foam filter 50ml
Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€198.00* / 1000 Milliliter)

€9.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency