6160 FG New Beetle Off-Road body shell unpainted

€189.90*

Available

Product number: fg_6160

EAN: 4058575066637

Product information "6160 FG New Beetle Off-Road body shell unpainted"

Genuine FG spare/option part.

The New Beetle Off-Road body is suitable for the Race Buggy Leopard (year 2000), not for the Off-Road Buggies Marder and Beetle.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

6135 FG Engine mount large Zenoah/Marder 2WD

Genuine FG spare/option part.Fits all FG off road cars except Leopard and Leopard race.Contents:1 piece

€15.90*

6134/01 FG Engine mount small for CY / Zenoah Marder 2WD, 4WD

Genuine FG spare/option part.Fits all FG 2WD and 4WD off road cars except Leopard and Leopard race or for CY / Zenoah G230/240/260/270.Contents:1 piece

€13.90*

Details

6175 FG Body support Monster models

Genuine FG spare/option part.Dimensions:Length: 170 mmWidth: 28 mmThickness: 5 mmContents:1 piece

€5.90*

6176 FG Dampening rubber for body support

Genuine FG spare/option part.Contents:4 pieces

€9.90*

6180/01 FG Roll bar for Stadium Truck

Genuine FG spare/option part. This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits stadium truck body shells.Contents:1 set

€16.30*

6155 FG Marder body shell Zenoah white

Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€114.99*

6137/01 FG Spacer tubes for gear plate

Genuine FG spare/option part.For offroad cars (vertically installed engine). Set with two 26,3 mm and one 24,3 mm, 6 mm bore.Contents:3 pieces

€9.50*

6183/01 FG Alloy spacer tubes, 8x27 mm/10x34 mm

Genuine FG spare/option part. Necessary for 6183 and 6184.Contents:2 pieces

€7.90*

6185 FG Side body mounts

Genuine FG spare/option part. For all monster models.Contents:2 pieces

€5.50*

6180 FG Roll bar for Big Foot

Genuine FG spare/option part.This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits monster truck body shells.Dimensions double loop:Height: approx. 100 mmWide: approx. 230 mmDimensions kickers section:Length: approx. 190 mmWidth: approx. 120 mmContents:1 set

€29.30*

6138/01 FG Bowden cable holder for rear disk brake

Genuine FG spare/option part. Contents:1 piece

€5.30*

6181 FG Front wishbone for Monster-Truck

Genuine FG spare/option part. Plastic wishbone for all monster and stadium modelsContents:1 piece

€12.95*

Customers also viewed

58150 FG Body shell Offroad Beetle 4WD, clear

Genuine FG spare/option part. The body shell is delivered unpainted, without decal set and rear wing.500 mm wheelbaseLength: 690 mmWidth: 385 mmHeight: 240 mmContents:1 piecePainting tips:

€101.00*

06409/05 Mini block M / OR tires, glued, white, 2pcs.

Item N° 06409/05 Mini block M / OR tires, glued, white, 2pcs.Spare part for the Leopard 2010 2WD/4WD versionMeasures:Diameter: 160 mmWidth: 64 mmThe Mini Block tires are developed for slightly loose underground. They are excellent as front tire for the 2WD models in connection with the Mini Pin tires on the rear axle. The tires are glued ready to run on the widened 1:6 wheels.These wheels are suitable for the FG Marder, Beetle, Off-Road Buggy and the monster models. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

€54.90*

Details

FG Sportsline 2WD-530 with Team Truck body and HT-Edition

Former: "Atego" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*

Configure now

FG Sportsline Truck 4WD with FG Super Race Truck body shell clear

After the successful introduction of the 4WD Sportsline chassis for 1:5 FG Touring and Sports cars this chassis is now available also for Race Trucks. Mainly rookies benefit from the advantages of an all-wheel drive. Traction also on dusty asphalt, therefore no pulling of the rear section, all around just pure driving fun. These are just some advantages of the four-wheel drive.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell is clear.The Race Truck chassis is equipped with a double wishbone suspension, toe-in, camber and castor can be adjusted. The robust all-wheel drive gives the vehicle a neutral driving performance on almost every surface. We set big value on durability using strong materials as well as operator convenience. The FG Sportsline class is the affordable, but still high-quality entry into the RC car sport.Technical description:Equipped with a powerful 26 cm³ engine, Tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. Highlight however remains the approved FG all-wheel drive. Maximal traction as well as simple handling, grip in curves - these are the advantages only a four-wheel drive can offer. With a wheelbase from 530 mm.Dimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mm Trucks in action!

€1,249.95*

Configure now

68400/01 FG Alloy damper plate/ alloy rear axle mounts Off-Road Buggy WB535

Genuine FG spare/option part. Set includes right and left rear axle mounts, damper plate, screws.Contents:1 set

€175.95*