HURRAX extreme Race tires + GRP Disc rim + inlays set
Product information "HURRAX extreme Race tires + GRP Disc rim + inlays set"
HURRAX extreme Race tire and insert 175x70 mm
HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction.
If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors.
In order to reduce the edging in the tire on the front axle.
This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.
An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.
This is especially true for 2WD models.
Dimensions:
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing HURRAX extreme Race tire and insert 175x70 mm
HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction.
If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors.
In order to reduce the edging in the tire on the front axle.
This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.
An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.
This is especially true for 2WD models.
Dimensions:
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
GRP off-road disc rim for tires with approx, 132 mm inner diameter.
The closed disc rim features reinforcement ribs on the backside and a protective collar around the wheel nut seat.
Dimensions:
HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction.
If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors.
In order to reduce the edging in the tire on the front axle.
This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.
An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.
This is especially true for 2WD models.
Dimensions:
- External diameter approx. 175 mm
- Inner diameter approx. 130 mm
- Width approx. 70 mm
- Weight: one glued tire on Hurrax rim: 470 grams
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing HURRAX extreme Race tire and insert 175x70 mm
HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction.
If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors.
In order to reduce the edging in the tire on the front axle.
This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.
An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.
This is especially true for 2WD models.
Dimensions:
- External diameter approx. 175 mm
- Inner diameter approx. 130 mm
- Width approx. 70 mm
- Weight: one glued tire on Hurrax rim: 470 grams
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
GRP off-road disc rim for tires with approx, 132 mm inner diameter.
The closed disc rim features reinforcement ribs on the backside and a protective collar around the wheel nut seat.
Dimensions:
- for tires with an inner diameter of approx. 132 mm and approx. 70 mm width
and an outer diameter of approx. 180 mm (like i.e. GRP / Gandini tires) - Weight approx. 172 gramms
Login
Accessories / Spare parts
Accessories / Spare parts
Accelerator-spray is the second component to cure superglue immediately.This set is also particularly suitable for the possible repair of loosened tire/rim gluing!Advantages:Tangible adhesion after a few secondsAromatic solvents and hexane freeSuitable for hobby, craft, industry and householdProcessing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.Contents:Special tire cement ht 4000Spray can activator
Content: 170 Milliliter (€87.65* / 1000 Milliliter)
Item N° y0285 Accelerator - 1pce.For all tire adhesives above,150 ml spray canAccelerator-spray is the second component to cure superglue immediately.Advantages:Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household. Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.
Content: 150 Milliliter (€66.00* / 1000 Milliliter)
Item N° y19281 HT-tire adhesive 4000, 1pce.1 piece / 20 grammsHT-tire cement, specially formulated for rubber/plasticContent:20 gr bottle
Content: 20 Gramm (€345.00* / 1000 Gramm)
For all tire adhesives above,15 ml pump spray bottleAccelerator-spray is the second component to cure superglue immediately.Advantages: Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household.Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.
Content: 15 Milliliter (€593.33* / 1000 Milliliter)
Kunden haben auch gesehen
Kunden haben auch gesehen
Driven by 8S brushless power and an ARRMA®-tough design, the OUTCAST 8S BLX 4WD delivers the torque, acceleration and speed you need for extreme action in 1/5 scale. This ready-to-run stunt truck comes equipped to defy gravity right out of the box. From the heavy-duty front bumper to the wheelie bar in back, it's engineered to do it all: long, tall wheelies; tight, fast donuts; standing and aerial backflips; high leaps into the air; and more over all terrain, in all conditions.Just add your choice of batteries and charger and go. The OUTCAST 1/5 8S BLX 4WD includes a Spektrum DX3 Smart transmitter and SRS6110AT AVC® (Active Vehicle Control®) receiver that take full advantage of the Spektrum Smart Firma brushless motor and ESC's innovative telemetry capabilities. Download the free Spektrum Dashboard App to your mobile device and follow motor RPM, ESC temperature, receiver voltage, drive pack voltage and more data in real-time. Dial-in extra stability with the radio's AVC® system to carve corners and nail jumps without letting up on the throttle.Bigger than big and engineered for brute power and toughness, the ARRMA® 1/5 scale OUTCAST 8S BLX 4WD Stunt Truck features a metal-reinforced design that lets you blast up, over and through bruising obstacles. Metal shafts, turnbuckles and outdrives, plus all-metal internal gears, give the drivetrain and suspension system unstoppable strength. Even the included Spektrum S905 digital servo boasts the strength of metal gears.The extra-rigid, laser-etched, anodized aluminum chassis plate has a multi-structured center brace system, rear lower chassis brace and strong composite chassis side pods for the durability to support extreme stunts. Extra-thick molded composite front and rear shock towers hold massive 20mm bore, oil-filled adjustable shocks to soak-up bumps and jolts.ARRMA® keeps your maintenance time to the minimum with an efficient, driver-friendly design. A sliding, 3-bolt aluminum mount provides fast motor access. The vehicle's front, rear and center modules and waterproof electronics module are also engineered for quick and easy access, removal and maintenance.The ultra-tough OUTCAST 1/5 8S truck body arrives factory trimmed, painted and decaled. A center protection tower on the chassis interfaces with the roll cage for increased body durability. Its tough stunt truck wheels come outfitted with metal 24mm hex inserts and multi-terrain dBoots® BACKFLIP tires that provide all the traction you'll need to flip, grip, wheelie and spin. A high downforce wing helps keep the vehicle grounded and a wheelie bar is there for when only 90 degree wheelies will do! Features Generelle Features ARRMA®-tough design ARRMA® modular platform with many "custom-build" options Adjustable battery boxes with hook and loop straps Chassis brace options including tower-to-tower Reverse bell crank steering system Heavy-duty double spring servo saver Hex hardware throughout Versatile chassis accepts motors up to 56110 size and 1/6 or 1/5 size servos 2-year limited warranty (see website for details) Performance Spektrum DX3 2.4GHz Radio with SRS6110AT AVC® Receiver Spektrum Firma 160A Smart ESC Spektrum Firma 1250Kv Brushless Motor Spektrum S905 Metal-Geared Digital Servo 4-Wheel shaft drive 8S Power (two 4S batteries, not included) Anti-roll bars (optional, not included) Adjustable camber Adjustable front toe Rear adjustable camber link positions Adjustable ride height Adjustable droop 20 million cSt oil in center differential CVD driveshafts All-terrain dBoots® BACKFLIP tires Massive 20mm bore oil-filled adjustable shocks Wheelie bar with rubber tires for maximum stunting High downforce wing fitted with special wear screws to protect the wing when upside down Additionally required for operation: Two batteries, preferably 4S LiPo cHARGER Durability Extra-rigid, laser-etched anodized aluminum chassis Multi-structured center brace system Rear lower chassis brace Strong composite chassis side pods Under-chassis skids Metal inserts molded into the front steering knuckles Metal wishbone covers to prevent the pivot ball from pulling out of the arms Extra-thick molded composite front and rear shock towers Heavy-duty drivetrain Durable steel driveshafts All-metal diff outdrives and gearbox internals Spiral-cut crown/pinion gears Metal differential gears Metal spur/idler gear Aluminum sliding motor mount Heavy-duty dual spring servo saver Waterproof* receiver box Electronic ESC power switch Captured hinge pins Aluminum hanger inserts Center protection tower that interfaces with the roll cage for increased body durability Body clip protection pads on top of body Single piece wing mount Heavy-duty front bumper Metal 24mm hex inserts in wheels Easy Maintenance Easy access to front and rear differentials (5 screws) Easy-to-remove Power Module (5 screws) Sliding motor mount for easy motor removal (3 screws) Easy-to-remove chassis braces (1 clip with retainer) Easy-to-remove front, rear and center modules Easy-access waterproof* electronics module WHEELIE BAR For when only 90 degree wheelies will do SWB CHASSIS Responsive stunt performance SLIDING MOTOR MOUNT For easy meshing and quick removal FRONT BUMPER Stylish looks and functional impact protection ROLL-CAGE, STUNT RAGE The stiff roll-cage offers protection against high speed roof-time BODY PROTECTION TOWER Interfaces with roll-cage for enhanced body durability ARRMA BRANDED ALUMINUM CHASSIS STUNT TRUCK WHEELS & DBOOTS BACKFLIP TIRES HYPER-DETAILED DECALS BODY POST SHIELDS WITH INTEGRATED BODY PIN RETAINERS ALL-METAL TRANSMISSION Center diff filled with 20 million cSt oil "SAFE-D5" PINION Safe and Secure SAFE-D5 design secures pinion to the motor in three ways: 1. Set Screw 2. D-Shaped hole 3. E-clip MASSIVE ALUMINUM OIL-FILLED SHOCKS ARRMA shock size comparison: 6S shock (left), 8S shock (right) OVERSIZED BATTERY TRAYS Accommodates a wide range of battery sizes ADJUSTABLE BATTERY TRAY Length: 140mm-170mm Maximum Battery Dimensions: 6.69 x 2.16 x 2.08 in. (170 x 55 x 53mm) GIANT 8S TOUGH METAL GEAR DIFFERENTIALS ARRMA diff size comparison: 6S diff (left), 8S diff (right) CENTER DIFF EXPOSED 8S ARRMA tough SPEKTRUM S905 METAL GEAR SERVO Full-size 1/5th scale servo Strong, metal gears used throughout Waterproof and dustproof case 15 tooth output spline Torque: 38kg-cm @6V Speed: 0.20sec/60degree @6V Dimensions: 2.36 x 1.14 x 2.17" (60 x 55 x 29mm) SPEKTRUM FIRMA 160A SMART ESC Waterproof and dustproof design 160A, 8S LiPo ready (3S*, 4S*, 6S* and 8S LiPo compatible) Spektrum® SMART Technology Fitted with reliable IC5 connectors (EC5 compatible) Integrated fan for reduced heat during extreme running High quality 10awg wires Low voltage cut off and thermal overload protection User programmable punch, brake, BEC, LVC sensitivity, reverse speed and motor timing settings SPEKTRUM FIRMA 1250Kv BRUSHLESS MOTOR 1250Kv 4685 size 8S brushless motor Beautifully etched aluminum can 4-pole construction for smooth and consistent power 6.5mm gold bullet connectors for reliable and efficient connection Black anodized aluminum motor can for increased heat dissipation Super strong 5mm shaft Groove at the end of the motor shaft allows the installation of a pinion retaining E-Clip SPEKTRUM 2.4GHz DX3 SMART TX & SR6100 RX Ergonomic steering wheel for precise control On-the-fly adjustable AVC® gain for personalized handling Lightweight and ergonomic design for long bashing 2 channel radio system 2.4GHz technology built around DSMR technology Full-range telemetry capabilities CAN BE EQUIPPED WITH SPEKTRUM DASHBOARD Spektrum Bluetooth module* DX3 Smart Phone Mount* Smart Phone with the free Spektrum Dashboard App* Download the free Spektrum Dashboard app for your smart phone at your preferred app store*Optional items that need to be purchased separately
Item N° 67350 Tuning clutch / Zenoah, setComplete clutch with Tuning carrier, lighter clutch blocks, coated dowel screws and reinforced clutch spring. According to the lighter weight the engine speed is slightly higher when the clutch comes, therefore the engine has more power speeding up.
Ready for installation with factory applied decals!