Genuine Area spare/option part. Spare part for AREA-XL 008 Wheel spacer for using the 5ive-T and HPI wheels with the Losi Desert XL.The O-rings are used as additional retainers fort he drive pins.Content:4 pieces
CNC-machined 6061-T6 aluminum front shock tower for Losi DBXL. Direct replacement for the stock part (aus Set # LOS 254012) Incl. screws.
CNC-machined 6061-T6 aluminum front shock tower for Losi DBXL+MTXL. Direct replacement for the stock part.
Spare part for AREA-XL 016 Lower front- and rear alloy a-armsfor Losi Desert XL.Dimensions small:Outside diameter: 9 mmInside diameter: 6 mmHeight: 6 mmDimensions large:Outside diameter: 7 mmInside diameter: 5 mmHeight: 6 mmContent:4 pieces big4 pieces small
Genuine Area spare/option part. Fits AREA-XL 021 Aluminum rear uprights for Losi DBXL.Contents:4 pieces
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum suspension arms for Losi DBXL. Set of four a-arms with plastic bushings for the hinge pins, all required nuts and bolts are included.Contents:2 pieces
Genuine Atop spare/option part. Two pieces CNC-machined 6061-T6 aluminum spring perches for Losi DBXL. Direct replacement for the stock part (from set. # LOS 253006).Content:2 pieces
Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces
Genuine ATOP spare/option part. Aluminum spacer bushings for the ball joints on camber and steering rods of Losi DBXL and DBXL-E.Content:8 pieces
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace for Losi DBXL/DBXL-E. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front shock tower for Losi DBXL+MTXL. Direct replacement for the stock part.Contents:1 piece
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum transmission case by ATOP for Losi DBXL/DBXL-E and MTXL, front and rear.Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case.Contents:1 piece
Genuine ATOP spare/option part. Steering rods for Losi DBXL-E 2.0 with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Dimensions: Hole to hole: 108mm Total length: 128mm Contents:2 pieces
Genuine ATOP spare/option part. CNC-machined 6061 aluminum transmission case by ATOP, fits front and rear.Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!
Genuine ATOP spare/option part. Rear transmission mount for Losi DBXL cnc-machined from 6061 aluminum by ATOP.Through the use of aluminum, the problem of torn out threads (incl. the front bumper installation) is eliminated. At the same time the chassis section under the transmission is strengthened and the mounting points for the shock towers are reinforced.Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!
Genuine ATOP spare/option part. CNC machined 6061-T6 aluminum rear uprights from ATOP to fit all Losi DBXL and MTXL versions, gasoline and electric.Significantly more rigid than the stock plastic version, this part contributes to increased directional stability. Plastic bushings for the hinge pins ensure reduced wear.Two additional mounting points are available for attaching the camber rods, allowing the model's handling to be better matched to the track.Comes with wheel bearings included. Contents:2 pieces
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum chassis braces for Losi DBXL/DBXL-E. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:2 pieces
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC.Increases track width by 25 mm. Fits all versions of DBXL / DBXL-E / 2.0 (brushless and gas) and MTXL. 2 mm O-rings protect against drive pin loss.Set of four including O-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set
Replacement part for the front and rear wishbone set with the order number: HR1001.Set includes:4 x bushing4 x flanged bushing2 x droop limiter screw2 x locking nut2 x lock washer4 x Locking screw for hig pin
Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece