Genuine Smartech spare/option part.Front lower alloy a-arms, complete with rose joint assemblies included. Fits Carson cars Attack, Super Attack and Gas BlasterDirect replacement for stock plastic a-arms Carson #32404 or #32546.Content:2 pieces

Rear lower a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

Rear upper a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

Item N° 306057 / S5085Reinforced engine mount for Carson / Smartech 1/6 carsm 1 pceCarson part number: 306057Smartech part number: S5085Reinforced aluminum engine mount for Carson / Smartech 1/6 cars with three M5 tapped mounting holes.Dimensions:Length: 80 mmWidth: 10 mmThread size: M5

Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (wishbone pin), too. Fits the rear axle of all FG offroad cars (2WD and 4WD) and all Carson / Smartech cars.Content:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm

Fits all 2WD Carson / Smartech largescale offroad cars.Will also fit GP buggy chassis "Big Pyro" from Reely.CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.

The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO

Alloy rear axle conversion kit for Smartech UNO and Carson Attack and Super Attack (not Evo!), Gas Blaster and C5; Smartech Spider and Ranger cars.Fits for:- C5 / On road / Touring car- C6 Attack- Touareg- Super Attack- Gas Blaster- Duratrax Firehammer- Spider- Big AttackThe set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04.

CNC machined a-arms, fit Carson Attack and Smartech UNO. The a-arms come in pairs as shown with ball joint, balls and hardware as shown.

Machined alloy version replaces the stock stamped part, 5 mm high strength alloy.

Machined alloy version replaces the stock stamped part, 5 mm high strength alloy.

Machined alloy version replaces the breakage prone plastic stock part.

Genuine Smartech spare/option part.Machined alloy version replaces the breakage prone plastic stock part.Suitable for Smartech Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan.Content:1 piece

Alloy rear uprights, with replaceable hinge pin bushings.Fits FG and Carson/Smartech Attack, Attack Evo, Gas Blaster, Gas Devil, Super Attack, CRT, CRT 4x4, CPT, Uno, Monster Truck, Pick Up, Beetle and C5.The bearing bushings and bearings should be glued in place, as they have minimal play.One each lefthand and righthand version.Please note: for the installation of all popular disc brakes, we recommend: y6479

CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.

CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant.They come with all necessary hardware included.

Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

Genuine HT spare/option part.Rear upper alloy wishbone with droop stop. Replacement for plastic wishbone FG 6074/02.Will also fit the following Carson/Smartech cars:Onroad chassis C5, Attack, Super Attack, Gas Blaster and TouaregCarson Comanche, Attack Evo, CRT + CPT when installedwith 75 mm turnbuckle y0988Comes with 2 M8 low height nuts included. Contents:2 pieces

Genuine HT spare/option part.Rear alloy damper plate with several adjustment possibilities of the shock absorbers. Replacement for FG plastic rear shock tower FG 7072/01Please note: When installing in combination with plastic diff mounts you should insert a-arms with hinge pins before bolting together rear plate and diff mounts.Content:1 pieces

Genuine HT spare/option part. Suitable for all FG 2WD and Smartech/Carson 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1. Content:2 piece

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

Genuine HT spare/option part.Spare part for y0932.Contents:1 piece

Genuine HT spare/option part.Each one lever inklusive M3 x 10 mm screws. Spare part for y0932.Contents:1 piece

Genuine HT spare/option part. Front upper a-arms, replaceable plastic bushings, l/h ad r/h version available. Contents:2 pieces