GPM 7080/02 Balls for ball driveshaft for FG and Mecatech, 5 mm, 6 pcs.

€5.30*

Prices incl. VAT plus shipping costs

Product number: gpm_7080_02

EAN: 4058575075523

Product information "GPM 7080/02 Balls for ball driveshaft for FG and Mecatech, 5 mm, 6 pcs."

Replacement balls for ball driveshaft.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Customers also bought

2012-132 Mecatech Drive Shaft

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

y19015 Bindulin Dichtfix (untill 180°!)

Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams

Content: 45 Gramm (€331.11* / 1000 Gramm)

€14.90*

7155/01 FG Support for body mount - 6pcs.

Supports for the adjustable body mounts long 7154 and short 7155.30 x 20 mm, slot width 9.2 mm

€9.90*

3023 FG Fastening bolt for body mounts

Genuine FG spare/option part. Replacement body mounts suitable for all Race-Truck front bumpers except 8420 front bumper 1/5.Dimension:Length: 75 mmThread: M4Contents:2 pieces

€11.50*

y1312 Twin hose bracket

Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.

From €14.90*

Details

Similar products

2012-148 Mecatech Rear Body Mounting

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

2012-144 Mecatech Retainer Ring for Shocks

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

2012-143 Mecatech Rear Shocks Mount Pin

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.90*

2012-133 Mecatech Balls for Drive Shaft

Genuine Mecatech spare/option part for the FW01.Content:6 pieces

€5.50*

2012-128 Mecatech Bush for rear Wheel toe in 4°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

2012-127 Mecatech Bush for rear Wheel toe in 4,5°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

2012-132 Mecatech Drive Shaft

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

2012-147 Mecatech Carbon Rear Body Support

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€20.90*

Details

2012-129 Mecatech Rear Lower Upright Shaft

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€7.70*

2012-126 Mecatech Bush for rear Wheel toe in 3,5° -0,5°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Details

2012-131 Mecatech Rear lower Wishbone RH

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€62.50*

Details

2012-146 Mecatech Braket Mount rear Body Support

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

Customers also viewed

TLR252011 TLR Brake Disc, Pad and Screw Set 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-BContents:1 set

€89.99*

y0929 HT Aluminum limited slip differential conversion kit for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Alloy case conversion kit for Carson Gas Devil, Carson CRT 4x4, Conrad Hell Devil and Smartech Titan, can be used for the center differential onlyComes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings, diff tube and the parts for the slip adjustment device.Adjustment of the locking effect:The adjusting screw which presses on the bevel gear axle and the thrust bearing regulates the locking. This causes friction between the bevel gear and the diff. housing. The locking effect can be adjusted between 0% and about 90%. The adjustment has to be changed according to track surface and dirt accumulation.Loosen the locking effect completely if the track is wet.Contents:1 piece

€129.90*

y1445 MadMax Maxi Pin tyre, 1 pair

MadMax MAXI PIN tyres have been specially developed for carpet race tracks! The special block tread pattern, with 480 knobs per tyre, provides excellent grip, but also puts extreme strain on the tyre and the rim. To stabilise the tyre, the outside of the tyre shoulder is equipped with vertical ribbing on the side, which minimises tilting under load and counteracts the shear forces that occur in bends. Furthermore, the MAXI PIN tyres have knobs positioned on the side of the outer side, which particularly support the steering behaviour of your RC car in bends. Taken together, the MAXI PIN tyres provide maximum grip. Dimensions: Outer diameter: 185 mm Tyre width at the outer edge of the tread: 75 mm 1 pair

€29.90*

5323, FG Pullstart unit complete, 1pce.

€0.00*

Details

6079/01 FG Rear axle shaft for ball drive

Genuine FG spare/option part. For ball drive system only!Diameter: 8 mm.Contents:1 piece

€33.90*

Details

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

2012-148 Mecatech Rear Body Mounting

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*