2012-106 Mecatech Aluminium Washer for Engine Fastening

€8.30*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_106

EAN: 4058575030539

Product information "2012-106 Mecatech Aluminium Washer for Engine Fastening"

Genuine Mecatech spare/option part for the FW01.

Content:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

6038 FG Engine mount washers for M4 and M4 screws

Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

Accessories / Spare parts

y0113 Thread locking compound

Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 10 Gramm (€790.00* / 1000 Gramm)

€7.90*

Details

y1007 CFH Diamant M50 gas torch

Genuine HT spare/option part. Powerfull high quality soldering torch with piezo igniter, runs on standard lighter gas. Great for removing bolts that have been installed using thread locking compound. Removable safety base for convenient hands-free operation., adjustable flameTechnical data:Flame temperature: approx. 1.300 °COperating temperature: approx. 650 °CTank capacity: approx. 26 g ButaneConsumption: approx. 20 g/hFlame adjustement: from 12 mm to 32 mmIgnition system: piezo ignition (like electronic lighters)Please note: due to shipment regulations the torch is not filled with gas when delivered!Contents:1 piece

€39.90*

Similar products

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

2012-104 Mecatech Countersunk Screw M5x14

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

This product is currently not available.

2012-122 Mecatech Rear Driving Axle

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

Details

2012-105 Mecatech Countersunk Screw M5x12

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

2012-112 Mecatech Pinion Z24

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Details

2012-107 Mecatech Gearwells Retaining Ring

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

This product is currently not available.

2012-120 Mecatech Spacer for Rear Upright Bearing

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

This product is currently not available.

2012-115 Mecatech Rear upper Wishbone Shaft

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€7.70*

2012-113 Mecatech Pillar Rear Axle LH

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€77.90*

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.

Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Details

2012-109 Mecatech Main Shaft

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€49.90*

Customers also viewed

AT-DBXL002 ATOP aluminum camber rods/steering rods for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces

€34.90*

y0148 Long carburetor brace

Genuine HT spare/option part. Fits all CY / Zenoah engines. Laser cutted stainless steel.The long design increases stiffness of the carburetor assembly significantly compared to the previous version. Comes with gasket and mounting bolt.Content:1 piece

€19.90*

TW-03 Mecatech Winter cap

Genuine Mecatech spare/option part. Please note:Due to the variety of sizes, the garments will be ordered from Mecatech only after receipt of payment and usually arrive at our shop after approx. two weeks. We ask for your understanding. Contents:1 piece

€36.90*

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution

Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

6028/01 FG Track rod left/right 74mm for 1:6 models

Genuine FG spare/option part. Fits all FG 1/6 off road cars, alloy version.Length of threaded section approx. 17 mm.Contents:2 pieces

€13.90*

y19135 Ball Bearing Extractor

For ball bearings (diameter 8 x 22 mm) in steering blocks and uprights.Instructions:Remove the M5 bolt until the gap between the bolt's head and the top of the spindle is slightly more than the the width of the bearingInsert the spindle with the bolt into the bearing and srew the bolt in with an allen key from the opposite (do not tighten the bolt!)Now remove the bearing by just turning the spindle ccw

€34.90*

5702 Mielke special Teflon gasket for all Masterfix systems

Special Teflon gasket, fits all Mielke Masterfix systems.Dimensions:Length: 19.4 mmInner diameter: 19.9 mmOuter diameter: 24.7 mm

€8.95*