6501/01 FG Differential grease 50 ml

€9.30*

Content: 50 Milliliter (€186.00* / 1000 Milliliter)

Prices incl. VAT plus shipping costs

Available

Product number: fg_6501_01

EAN: 3410569715166

Product information "6501/01 FG Differential grease 50 ml"

Genuine FG spare/option part.

Contents:

1 piece / 50 ml

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y0809 Klüber high performance grease for differentials

Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

Customers also bought

4429/01 FG Steel balljoint Ø5/M8

Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces

€57.10*

4429 FG Steel balljoint

Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

4429/02 FG Steel taper disk 5mm bore, 4 pcs.

Regular price: 7,90 EUROffer of the month price: 4,90 EURSteel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.

€4.90* €7.90* (37.97% saved)

4428 FG Steel balljoint Ø4/M4

Genuine FG spare/option part. Steel ball joint with 4mm bore (ball) and M4 right-threaded conncetion. Suitable for front adjustable ball stabilizers 8517 and rear ball stabilizers 8516, F1 stabilizers, steering rods a.s.o., also suitable for other makes. Dimensions:A = 4 mmB = M4C = 7 mmD = 14 mmE = 31 mmContent:2 pieces

€39.95*

4437/01 FG Alum.ball-and-socket joint Ø5/M6, 2 pcs.

Genuine FG spare/option part.Strong, maintenance-free and backlash-free precision ball joints made of aluminum. Ball with 5mm bore and body with M6 r/h female thread. For use with the adjustable upper aluminum and plastic wishbones at front and rear suspension.Comes with the required conical spacers included.

€86.90*

4437 FG Alloy balljoint Ø5/M8 - 2pcs.

Alloy ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for use with wishbones.When using these ball joints you will get a weight reduction in comparison with,A = 5 mmB = M8C = 8 mmD = 17.5 mmE = 39 mm

€84.70*

Similar products

y0744 Differential Silicone oil / grease, viscosity 15.000 untill 2.000.000, 50 ml

y0744 Viscosity: y0744/03 - 50.000+ 2.9EUR

For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€316.00* / 1000 Milliliter)

Variants from €12.90*

€15.80* €17.80* (11.24% saved)

y0203 Shaft seal conversion kit for Losi 5ive-T and Mini differential

This kit replaces the o-ring for sealing the drive cup shaft in the stock differential case by a real oil seal. Two new shims provide for the adjustment of the width of the shaft seal and replace the stock shim.Shaft seals are better than o-rings for sealing fast rotating shafts.The set includes the parts for retrofitting all three differentials of the vehicle.Installation can be done only in the differential housing. Unfortunately the corresponding bore in the differential gears is machined differently, so you have to stay with the O-ring for that application.Set includes:Three pieces shaft seal 10 x 15 x 3 mmThree pieces shim 15 x 21 x 0.2 mmThree pieces shim 10 x 20 x 0.3 mmFive pieces washer 10,5 x 20 x 2 mm

€6.90*

y0809 Klüber high performance grease for differentials

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

y1072 HT Alloy differential spur gear protector

Genuine HT spare/option part.Gear protector for the bottom of the 2WD chassis plate. Replaces stock plastic part FG 6082 or Carson 32481.Contents:1 piece

€29.90*

y1528 Bearing puller for differentials

Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*

6512 FG Differential grease 50 ml

Genuine FG spare/option part.When adding this grease in the differential you achieve a blocking effect according to its sticky nature. Only for standard differentials, not for the adjustable differentials.Contents:1 piece / 50 ml

€11.90*

y0902 Reinforced differential tube for FG buggy differential

Genuine HT spare/option part.Extra strong tube machined from 7075-T6 high grade aluminum with an outerdiameter of 49 mm. This tube is made to solve the problem of destroyed differential tubes in off-road cars, it is several times stronger than the stock version.Contents:1 piece

€34.90*

6065/05 FG Differential key

Genuine FG spare/option part. The differential key prevents a damage of the diff. cover through bigger stones. Suitable for all FG 1:6 Buggy and Monster models.Contents:1 piece

€4.90*

6501 FG general-purpose grease 20 ml

Genuine FG spare/option part. general-purpose grease Topas L32 developed as a high-speed and low-temperature grease for roller bearing and plain bearing, non-ageing.Temperature range: -60 to 220°C.Contents:1 piece / 20 ml

Content: 20 Milliliter (€465.00* / 1000 Milliliter)

€9.30*

y19120 Drive shaft boots

Reduce the wastage at the drive shafts. Price per pair.

€6.90*

8505 FG Mounting tool for bevel gear wheels - 1pce.

We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

Z181 HPI Silicone diff oil vis. 1000 30 cc

Genuine HPI spare/option part. Content:30 cc / 1 piece

Content: 30 Milliliter (€329.33* / 1000 Milliliter)

€9.88*

This product is no longer available.