Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

7317/08 FG Clutch spring for CY / Zenoah

Product information "7317/08 FG Clutch spring for CY / Zenoah"

Genuine FG spare/option part.



Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

Pink-Racing Reinforced clutch spring y0134, 1 pce.
Reinforced spring for Zenoah OEM clutch with 2.7 mm wire diameter and five coils. Engagement speed is around 7500 rpm, which allows the engine to build up more power and torque for accelleration.Fits Zenoah, CY and most other engines in the 23 - 30 cc range with stock clutch.

€4.95*

Average rating of 0 out of 5 stars

7317/11 FG Clutch spring reinforced 2,7mm G230/260/240/270/290/320
Genuine FG spare/option part. Fits Zenoah G230/260/240/270/290/320.Reinforced clutch spring for the Zenoah standard clutch. Engagement speed approx. 8000rpm. The engine has a higher torque and therefore more power for acceleration according to the raised operative speed. Suitable for all Zenoah engines.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

15449 HPI Clutch spring 8000rpm red
Genuine HPI spare/option part. Spare part for #15448 Baja 5B High Response Clutch Shoe/Spring Set. When used as standard, the clutch will engage at 8000RPM, which is great for low-grip or muddy surfaces. If used with #15440 Clutch Shoe/Spring Set, the clutch will engage at 7000RPM, ideal for high-grip surfaces.Content:2 piece

€14.90*

Customers also bought

Average rating of 0 out of 5 stars

6044/05 FG Metal brake disk
Genuine FG spare/option part. Steel brake rotor for single disc brake, only for use in combination with competition brake pads.Dimensions:Diameter: 52 mmSquare size: 18 mmContents:1 piece

€16.90*

Average rating of 0 out of 5 stars

6044/01 FG Brake disk epoxy 97
Genuine FG spare/option part. Brake disc for single disc brake (97 up).Dimensions:Diameter: 52,5 mmSquare size: 18 mmContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

7050 FG Plastic gear carrier 52mm - 1pce.
For 44T - 39T spur gears.Also available in alloy:

€13.90*

Average rating of 0 out of 5 stars

6041 FG Steel layshaft 10 mm
Genuine FG spare/option part. For all FG models except Formula 1.Dimensions:Length: 103 mmDiameter: 10 mmImportant:When installed in a Carson / Smartech model the brake hub is fastened with a screw stomach.Content:1 piece

€23.90*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*

Average rating of 0 out of 5 stars

5716 FG Clutch blocks for Chung Yang
Genuine FG spare/option part. Chung Yang bolts 5718 are required for installation.Contents:2 pieces

€19.90*

Similar products

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

Average rating of 0 out of 5 stars

7316/09, FG OEM clutch complete, set for Zenoah/CY/Fuelie/Losi engines
Complete clutch with spring, carrier and bolts. For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.

€44.90*

Average rating of 0 out of 5 stars

7316 FG Clutch blocks for Zenoah
Genuine FG spare/option part. Zenoah bolts 7318 are required for installation.Content:2 pieces

€27.90*

Average rating of 0 out of 5 stars

y1419/01 Clutch spring 6.000 1 / min for the Sintered clutch for Zenoah, Chung Yang, Losi, HPI & Co.
Clutch spring for about 6,000 1 / min. for the OEM clutches from Zenoah and many other rc-car engines from 23 cm³ - 32 cm³.Content:1 piece

€5.90*

Average rating of 0 out of 5 stars

7317/11 FG Clutch spring reinforced 2,7mm G230/260/240/270/290/320
Genuine FG spare/option part. Fits Zenoah G230/260/240/270/290/320.Reinforced clutch spring for the Zenoah standard clutch. Engagement speed approx. 8000rpm. The engine has a higher torque and therefore more power for acceleration according to the raised operative speed. Suitable for all Zenoah engines.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

7318 FG Dowel screw set for clutch blocks Zenoah
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:2 pieces

€9.90*

Average rating of 0 out of 5 stars

67350 FG Tuning clutch / Zenoah, set
Item N° 67350 Tuning clutch / Zenoah, setComplete clutch with Tuning carrier, lighter clutch blocks, coated dowel screws and reinforced clutch spring. According to the lighter weight the engine speed is slightly higher when the clutch comes, therefore the engine has more power speeding up.

€65.90*

Average rating of 0 out of 5 stars

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

Average rating of 0 out of 5 stars

7315 FG Clutch block carrier Zenoah
Genuine FG spare/option part. Content:1 piece

€11.50*

Average rating of 0 out of 5 stars

7316/01 FG Tuning-clutch block for Zenoah
Genuine FG spare/option part. Spare part for Zenoah ZG22, G230RC, G230RC 04 and G260RC.Zenoah bolts 7318 are required for installation.Contents:2 pieces

€37.90*

Average rating of 0 out of 5 stars

y0723 Gas-nitrited tuning clutch bell for FG, Smartech/Carson, Harm, RS5 & Co.
Genuine HT spare/option part. Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

050024 Carson Fuelie standart clutch complete set
Genuine Carson spare/option part. Fits all Zenoah and Chung Yang engines.Contents:1 set

€29.90*

Customers also viewed

Average rating of 0 out of 5 stars

7317/11 FG Clutch spring reinforced 2,7mm G230/260/240/270/290/320
Genuine FG spare/option part. Fits Zenoah G230/260/240/270/290/320.Reinforced clutch spring for the Zenoah standard clutch. Engagement speed approx. 8000rpm. The engine has a higher torque and therefore more power for acceleration according to the raised operative speed. Suitable for all Zenoah engines.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

y1419/01 Clutch spring 6.000 1 / min for the Sintered clutch for Zenoah, Chung Yang, Losi, HPI & Co.
Clutch spring for about 6,000 1 / min. for the OEM clutches from Zenoah and many other rc-car engines from 23 cm³ - 32 cm³.Content:1 piece

€5.90*

Average rating of 0 out of 5 stars

Pink-Racing Reinforced clutch spring y0134, 1 pce.
Reinforced spring for Zenoah OEM clutch with 2.7 mm wire diameter and five coils. Engagement speed is around 7500 rpm, which allows the engine to build up more power and torque for accelleration.Fits Zenoah, CY and most other engines in the 23 - 30 cc range with stock clutch.

€4.95*

Average rating of 0 out of 5 stars

7343/13 FG NGK Iridium Spark Plug CR8 for CY / Zenoah G230/240/260/270/290/320
Genuine FG spare/option part.The NGK Iridium high-tech spark plug allows for better smoothness, enhanced acceleration, reduced emissions and leads to a reduction in fuel consumption.In the model sports the high-tech metal iridium guarantees top performance.The iridium spark plug has several advantages. Its center electrode from the precious metal iridium is only 0.6 mm thin and very tough. Because the melting point of iridium is over 2400 ° C, it is extremely durable.Thread size M10 x 1Applications:Chung YangZenoah G230/240/260/270/290Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

4412 FG Driveshaft boots
Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

7315 FG Clutch block carrier Zenoah
Genuine FG spare/option part. Content:1 piece

€11.50*

Average rating of 0 out of 5 stars

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency