66215, FG Alloy engine mount large 4WD, 1pce.

€84.90*

Available

Product number: fg_66215

EAN: 3410564530313

Product information "66215, FG Alloy engine mount large 4WD, 1pce."

For FG 1/6 4WD competition cars only.

Not suitable for conversion of an FG Sportline 4WD models since several small parts required for the swap are not included. As an alternative use item no. y0497.

Suitable ball bearing for the layshaft: 6036/05 FG bearing set 10x19x7 with grease filling - 2 pcs

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

6036/05 FG bearing set 10x19x7 with grease filling - 2 pcs

Item N° 6036/5 FG bearing set 10x19x7 with grease filling - 2 pcs

€15.90*

Details

Alternatives

%

y0497 Alloy engine mount large for all FG 4WD Models

Large alloy engine mount for all FG 4WD cars.Contrary to the FG pack this one includes the complete hardware for installation in Sportsline cars as well!

€59.90* €69.90* (14.31% saved)

Customers also bought

%

y1072 HT Alloy differential spur gear protector

Genuine HT spare/option part.Gear protector for the bottom of the 2WD chassis plate. Replaces stock plastic part FG 6082 or Carson 32481.Contents:1 piece

€28.90* €29.90* (3.34% saved)

9438/01 FG Pedestal for hydraulic brakes

Alloy pedestal to mount the master brake cylinder of the hydraulic brakes FG Magura 2, Mecatech Expert and Mecatech twin piston brake systems on the sloped chassis part of Off-Road Buggies and Monster models.Lieferumfang1x Pedestal for hydraulic brakes2x Countersunk screw with torx 4x12 2x Countersunk screw with torx 4x14

€14.40*

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€93.40*

y0897 Wheelie bar with suspension for 2WD + 4WD models - 1pce.

Wheelie bar with double ball raced wheel, cnc-machined from high strength alloy. The arm has a rubber suspension unit, the height is infinitely adjustable. The suspension allows for a maximum deflection of 30 degrees and is dirt- and mud-proof. The wheel bearings are sealed.The unit fits FG Monster Truck, Monster Beetle and Marder BigFoot, except for Monster Buggy Off-Road WB535 4WD. Installation on other models will be possible, but requires modifications to the chassis, mainly to accept the bolt pattern. The Carson Attack already has the correct pattern.

€99.90*

7112 Samba O-rings Set 50mm

Genuine Samba spare/option part. Replacement o-ring for Samba pipes.

€9.90*

Details

6061 Mielke pull starter with hybrid starter function

Genuine Mielke spare / option part.Starting by pull starter or by cordless screwdriver or electric starter is possible.Pull starter with hybrid starter function. Who does not know it? A torn starter rope, blisters on your finger from constant pulling or a defective starter pawl. All these problems are a thing of the past with the hybrid starter.With the help of a cordless screwdriver the engine can be started very easily and if the battery of the cordless screwdriver is empty, the engine can be started by using the conventional way with the pull-rope starter.Please note:The starter shaft for electric start is inserted in a straight line in extension of the crankshaft. No part of the vehicle must be in the way here. On a model with a longitudinally mounted engine (e.g. Losi 5ive or DBXL vehicles) the rear axle will usually prevent the use of the electric start. The normal pull start by cable remains possible.Contents:1 piece

€114.90*

Details

Customers also viewed

%

y0497 Alloy engine mount large for all FG 4WD Models

Large alloy engine mount for all FG 4WD cars.Contrary to the FG pack this one includes the complete hardware for installation in Sportsline cars as well!

€59.90* €69.90* (14.31% saved)

67221 FG Foam tire insert 56 x 17 x 407 mm, 2 pcs.

Item N° 67221 Foam tire insert 56 x 17 x 407 mm, 2 pcs.

€19.90*

y0654 Alloy engine mount big 1:5 2WD for FG Sportsline Zenoah

CNC-cut alloy engine mount for all FG 1:5 and 1:6 Truck models with horizontal engine ahead as Zenoah ZG22, G230RC, G260RC, FG CY23 and CY26.Bearing seat 19 x 7 mm2WD FG 1/5 Sportsline cars do not use a small engine mount. For this application the stock aluminum plate # 7398 is used for engine installation.

€69.90*

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€93.40*

68407 FG Aluminium differential .fourfold self-lock 4WD, set

Item N° 68407 Aluminium differential .fourfold self-lock 4WD, setThrough locking of the drive wheels with friction washers the drive wheels have a higher torque. Additional this differential can also be locked mechanically by set screws.Suitable for the 1:5 Sportsline 4WD Touring car models and the 4WD 1:6 Buggy and Monster models. For the assembly you need the rear axle cover Item N°. 68407/01.

€236.95*

6134/01 FG Engine mount small for CY / Zenoah Marder 2WD, 4WD

Genuine FG spare/option part.Fits all FG 2WD and 4WD off road cars except Leopard and Leopard race or for CY / Zenoah G230/240/260/270.Contents:1 piece

€13.90*

Details

68501 FG 4WD conversion kit for 2WD Marder

Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set

€399.95*