Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

68501 FG 4WD conversion kit for 2WD Marder

Product information "68501 FG 4WD conversion kit for 2WD Marder"

Genuine FG spare/option part.

Fits FG 2WD Marder.

Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.

The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.

Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.

Contents:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

69240 FG Plastic servo retainer big, 1 pair

€13.90*

Average rating of 0 out of 5 stars

69265 FG plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.
Item-No. 69265plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.Original plastic-wishbone, front bottom.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€23.90*

Average rating of 0 out of 5 stars

69251/01 FG Plastic front axle housing, right, 2WD/4WD, 1:5
Genuine FG spare/option part. Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€23.90*

Average rating of 0 out of 5 stars

68534 FG Conversions kit Sportline Touringcar long to 4WD
For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.

€189.50*

Average rating of 0 out of 5 stars

68415 FG Cardan joints for front axle 4WD
Genuine FG spare/option part.With M8 thread!The set contents 2 cardan joints, ball diff. axles, protective bellows, balls.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR.Contents:1 set

€138.50*

Average rating of 0 out of 5 stars

69250/01 FG Plastic front axle housing, left, 2WD/4WD, 1:5
Genuine FG spare/option part.Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€23.90*

Average rating of 0 out of 5 stars

69241 FG Plastic servo retainer small
Genuine FG spare/option part. Dimensions:Length: 67 mmWidth: 20 mmHeight: 38.5 mmServo cutout: 42.7 x 28.7 mmContent:1 piece

€10.90*

Average rating of 0 out of 5 stars

69200/01 FG Alloy chassis 4WD, 530, 1pce.
Item N° 69200/01Alloy chassis 4WD, 530, 1pce.

€159.95*

Average rating of 0 out of 5 stars

69246/01 Throttle rods 1:5 4WD, 530, Set
Item-No.: 69246/01Throttle rods 1:5 4WD, 530, Set

€13.90*

Average rating of 0 out of 5 stars

68420/06 FG Alum. servo saver 80°, 1:5 4WD, complete
Genuine FG spare/option part. In details improved aluminium servo saver. Improvement through modification of the slant to 80° for the protective function. According to the regulating power and the number of steering servos the red and blue FG servo saver springs can be assembled. Only suitable for 4WD 1/5 scale.Contents:1 piece

€59.90*

Average rating of 0 out of 5 stars

69266 FG Plastic wishbones up front 2WD/4WD, 530, 2 pcs.
Item-No. 69266Plastic wishbones up front 2WD/4WD, 530, 2 pcs.Plastic wishbones. up front.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€23.90*

Average rating of 0 out of 5 stars

69270/01 FG Plastic front uprights, 2WD/4WD 530, 2 pcs.
Item-No. 69270/01Plastic front uprights, 2WD/4WD 530, 2 pcs.Original FG Plastic front uprights.For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€33.50*

Customers also viewed

Average rating of 0 out of 5 stars

68515 FG Tuning Conversion Kit for front and rear axle, Marder
Genuine FG spare/option part. Individual prices of the parts in the tuning set: 847,06 EurosAluminum conversion kit to aluminum front axle and aluminum rear knuckle and wishbone for FG Marder.Contents:1 set

€424.95*

Average rating of 0 out of 5 stars

68500, FG 4WD conversion kit for 2WD monster / stadium cars, set
Fits FG Monster and Stadium carsAre you owner of a Monster Truck or Monster Jeep, or perhaps of a Stadium Hummer? You are not really satisfied with the driving performance of your model, or you just want more driving fun? In this case we recommend to install the new 4WD conversion kit made by FG. The conversion kit includes all parts necessary to convert your 2WD Monster model to a 4WD model (complete front diff included). Assembly instructions are included.Fits the following FG cars:- Monster Truck- Monster Hummer- Monster Jeep- Monster Beetle Pro- Stadium Truck-Stadium Hummer- Stadium Jeep- Stadium Beetle ProPlease note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate y0532 separately.The exploded view shows a partially assemled kit, therefore you can't see every single part included! The video shows the FG Off-Road Buggy 4WD during a test drive for a presentation in the Cars & Details magazine!The entire chassis is 100% identical to the FG cars Marder 4WD; Beetle 4WD and Monster / Stadium 4WDEnjoy the video!

€399.95*

Average rating of 0 out of 5 stars

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition
To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Average rating of 0 out of 5 stars

6155 FG Marder body shell Zenoah white
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€99.90*

Average rating of 0 out of 5 stars

LOS250030/01 Losi Body shell set, red, Super Baja Rey
Genuine Losi spare/option part. Set includes:LOS250028 Losi Front Hood, red, Super Baja ReyLOS250029 Losi L/R Rear Fender Set, red, Super Baja ReyLOS250030 Losi Cab Section, red, Super Baja ReyContents:1 set

€169.99*

Average rating of 0 out of 5 stars

Traxxas TRX77096-4-BLUE X-Maxx 8S Belted 4WD Brushless TQi TSM Blue
new X-Maxx with Sledgehammer-tires Experience the Traxxas X-Maxx anew with internally reinforced Sledgehammer tires for ultimate traction and immense durability despite the toughest off-road adventures. The radial tire prevents inflation and thus improves roadholding at high speeds. In addition, the X-Maxx offers new gear ratio options with the overdrive gear set, which guarantees more power right out of the box. • Internally reinforced Sledgehammer tires belted on black 4.3" rims • Overdrive gear set 24/47Z (TRX7886) • New standard gear ratio 15/54Z • New high-speed gear ratio including 17/46Z • Pinless ProGraphix® monster truck body • Torsion-resistant modular composite chassis • All metal gears and steel CVDs • GTX aluminum oil-filled shock absorbers • Traxxas TQi 2.4GHz 2-channel remote control • TSM - Traxxas Stability Management • Self-righting system • Waterproof digital high-torque 2085 servo • Velineon Big Block 1275kV motor with cooling system • Waterproof VXL-8s speed controller • Top speeds up to 80km/h (with included 46HZ and optionally available 2x 4s LiPo Batteries) Size Wins Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speed. Belted Sledgehammer® tires conquer the most extreme terrain while providing unrivaled high-speed stability. Built to take brutal punishment in stride, X-Maxx is the definition of Traxxas Tough™. Extreme Power At the end of the day, size always wins. X-Maxx plows over obstacles and muscles through extreme terrain that leaves lesser trucks stranded. Mammoth 8-inch-tall tires, long-arm suspension, and huge ground clearance dwarf the surroundings for virtually unstoppable monster truck fun. At Traxxas, too much power is never enough! The durability of the VXL-8s™ is matched only by the sheer ferocity of its 8s 30+ volt LiPo muscle. The speed-tuned 1200XL Big Block motor propels X-Maxx with brutal authority and exacting quickness that warps your senses. No matter what you have driven in the past, nothing will prepare you for X-Maxx. All-Metal Drivetrain X-Maxx puts its massive power to the ground through an all-metal 8s driveline backed by the revolutionary Cush Drive® system, high-strength extruded aluminum center shaft, and our strongest steel driveshafts ever. The Torque-Biasing Center Drive improves driveline durability and drives huge steel 4-gear differentials. Belted Tires X-Maxx’s belted Sledgehammer tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed.

€1,249.99*

Average rating of 0 out of 5 stars

6000c FG Marder 2WD
The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

€699.95*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Plugin Development