67370 FG Alum.double servo saver 4WD, 1 set

€157.50*

Available

Product number: fg_67370

EAN: 3410569691224

Product information "67370 FG Alum.double servo saver 4WD, 1 set"

The mounting of the double servo saver enlarges the steering angle at the front axle.

The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves.

This set is suitable for the Leopard 4WD Competition.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

67336 FG Shock absorver protect le./ri. Leopard 2WD/4WD

Genuine FG spare/option part.Spare part for the Leopard 2WD/4WD 2010 versionContents:2 pieces

€8.30*

67330/02 FG Threaded piston rod Ø4,5 x 95mm Leopard 2WD/4WD

Genuine FG spare/option part. Spare part for the FG Leopard 2WD/4WD 2010 version.Content:1 piece

€13.90*

67320/13 FG Sealring Ø4,5mm Leopard 2WD/4WD, 2pcs.

Item N° 67320/13 Sealring Ø4,5mm Leopard 2WD/4WD, 2pcs.Spare part for the Leopard 2WD/4WD 2010 version

€10.90*

67320/10 FG Plastic shock piston Leopard 2WD/4WD

Genuine FG spare/option part. Spare part for the Leopard 2WD/4WD 2010 versionContents:2 pieces

€7.90*

67350 FG Tuning clutch / Zenoah, set

Item N° 67350 Tuning clutch / Zenoah, setComplete clutch with Tuning carrier, lighter clutch blocks, coated dowel screws and reinforced clutch spring. According to the lighter weight the engine speed is slightly higher when the clutch comes, therefore the engine has more power speeding up.

€65.90*

67320/09 FG Volume compensation Ø20mm Leopard 2WD/4WD, 4pcs.

Item N° 67320/09 Volume compensation Ø20mm Leopard 2WD/4WD, 4pcs.Spare part for the Leopard 2WD/4WD 2010 version

€5.40*

67577 FG Drive shaft 134 mm

Genuine FG spare/option part. Please note: If you own a Leopard 2WD with the old 130.5 mm driveshafts (same part number), the upgrade of both shafts is recommended.Contents:1 piece

€19.90*

67545 FG Body bolts, 2 pcs.

Item N° 67545Body bolts, 2 pcs.Spare part for Sportsline Leopard 4WD.

€3.50*

67603 FG Chassis stiffening right for Leopard 4x2

Genuine FG spare/option part. Contents:1 piece

€107.95*

Details

67320/08 FG Plastic guide disc Leopard 2WD/4WD, 4pcs.

Item N° 67320/08 Plastic guide disc Leopard 2WD/4WD, 4pcs.Spare part for the Leopard 2WD/4WD 2010 verison

€3.70*

67320/14 FG Lower shock retaining, tightened Leopard 2WD/4WD, 4pcs.

Item N° 67320/14 Lower shock retaining, tightened Leopard 2WD/4WD, 4pcs.Spare part for the Leopard 2WD/4WD 2010 verison

€4.60*

67336/01 FG Shock absorver protect le./ri., red, 2pcs.

Item N° 67336/01Shock absorver protect le./ri., red, 2pcs.Spare part for Sportsline Leopard 4WD.

€8.30*

Customers also viewed

y1430 Spark plug tester for 1/5 & 1/6 cars

The spark plug tester wiil be put in line between the spark plug in the engine and the spark plug cap. When the spark plug is in good working order, pulling the recoil starter will produce a spark easily visible in the clear section of the tester (see video!).

€14.90*

7080/03 FG Distance disk - 4pcs.

Rubber pad, fits inside of ball drive cups.Diameter 10.7 mmThickness 1.6 mm

€3.60*

Details

15460 HPI Carburetor WT-668

Genuine HPI spare/option part. Content:1 piece

€99.80*

XBC100 Spektrum Smart LiPo Battery Checker und Servo Driver

Genuine Spektrum spare/option part. When using the Spektrum XBC100 Smart Battery Checker with a Spektrum Smart battery, you will be able to see and adjust many of the settings only available with a Spektrum Smart charger. This includes one connection for balance and battery level checking, and providing records like number of cycles, internal battery temperature and exception reports. You can even adjust Smart battery settings right from the XBC100.The XBC100 also features a Qualcomm 3.0 USB charge port, giving you an easy way to keep your mobile device and Spektrum Smart Transmitters charged when USB power ports are scarce. Better yet, the XBC100 gives you the ability to better setup and test your models with the built in servo tester! Center and test your servo endpoints easily with the integrated PWM output port.Finally, all of this is displayed on a full color IPS LCD screen that is designed to be easy to read in direct sunlight and is accessed via a user friendly touch interface. Key Features Battery checker with built in cell balancing Advanced Servo testing feature helps with model setup Spektrum Smart battery technology allows users to take advantage of Smart Battery features Easy to read full color display Qualcomm 3.0 compatible USB power port with Quick Charge for compatible Android and IOS devices (up to 12v and 2 amps) Update port for easy access to updates and new features More than a Balance CheckerPilots and Drivers can stay better informed about their Lipo, LiHv, LiFe and LiIon Batteries with the Spektrum XBC100 Smart Battery Checker. With the Easy to read full color IPS LCD display, quickly see the battery percentage, cell balance, and be notified of abnormal conditions. And if your battery cells are out of balance, the XBC100 can conveniently balance each of your Battery cells to within ±0.005V accuracy. Smart Battery ConnectivityThe XBC100 gives Smart Battery users a simple to use battery checker that gives all the benefits of a balance checker with just one connection of the iC3 connector. And when connected to a Smart Battery, users can check all the integrated parameters such as number of cycles, events such as over discharge and overheating, as well as adjust smart battery settings like auto storage timer and preset charge current. Integrated Servo TesterBuilt in to the XBC100 Smart Battery Checker is a helpful pwm out port that is facilitated to be used as a Servo tester. Easily check your control ranges on any modern servo or esc. Users can Test for binding and current draw right from the checker, no special in line meter required. Qualcomm ® 3.0 USB Charge PortKeep your device charged and ready with the convenient USB power port. Just plug in a charged battery and hit start USB Charging and the XBC100 becomes a fast charging power bank ready to keep your Spektrum Smart Transmitter and mobile devices charged. Support Qualcomm QC 2.0/3.0， compatible with BC1.2 and Apple devices. Maximum output 12V/2A. Contents:1 piece

€49.99*

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now