68424 FG Conv. kit servo saver A/B (B-Aluminium), 2 pcs.
€47.50
Available
Product information "68424 FG Conv. kit servo saver A/B (B-Aluminium), 2 pcs."
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Accessories / Spare parts
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 2WD Competition. To fix the set drill 4 bore holes with approx. 4,5 - 5,5mm.
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.
Alternatives
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 2WD Competition. To fix the set drill 4 bore holes with approx. 4,5 - 5,5mm.
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.
Customers also bought
Medium wheelbase (510 - 515 mm) chassis, made of 4 mm aluminium.
Genuine FG spare/option part.Spare part for order no: 8380.Contents:1 set
Spacer bushings for front axle caster adjustment.Outer diameter 11 mmInner diameter 6.3 mmWidth 6 mm
Genuine FG spare/option part. Suitable for all 1:5 models, Race-Trucks and Monster models to optimize the road performance.Contents:1 piece
Genuine spare/option part.5mm stabilizer for the 2-damper front axle, not adjustable. Not suitable for Ecoline and Mono-Shock front axle.Contents:1 piece
Customers also viewed
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 2WD Competition. To fix the set drill 4 bore holes with approx. 4,5 - 5,5mm.
Genuine FG spare/option part. Suitable for FG Sportsline (old version, not 4wheel drive basic) and Eco-Line.The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A y1210HT Aluminum front bulkhead B y1036HT rose joints with conical spacersUnit prices: 318,30 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Additional parts shown on the pictures, like diskbrakes or other tuning parts, are only decoration and not part of the set. Contents:1 set
Item N° 68323 Servo saver 4WD parts A/B, set
Genuine Top Tuning spare/option part. Top Tuning The 20-amp Bigscale switch allows for a maximum input voltage of 30 volt. It is specifically designed as a receiver switch for use in combination with the Hitec HS-1005SGT servo and 4s receiver battery. The switch can also be used for other applications at your discretion with batteries up to 6S.Note: Top Tuning the electronic 20 amp Bigscale high voltage switch delivers the batterys full voltage. It does not replace a voltage regulator! The components which follow down the line (voltage regulator / servos / receiver) must be matched to this voltage! Using the latest MOSFET technology allows the 20 amp Bigscale high voltage switch to handle extreme loads, despite its small size. A blue LED status light clearly displays the activated mode. The 20 amp Bigscale high voltage switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. Properties:Voltage range: 3 to 30 VLoad: 20 ampsStandby consumption: 17 µAOperating temperature: - 15 ° C to +50 ° CCable length:Battery side 250 mmReceiver side 130 mmWeight: 13 gramsDimensions:Length: 29 mm Width: 13 mmHeight: 12 mmContents:1 piece
Fits for FG Evolution / Competition with the new 09 short chassis.
Genuine FG spare/option part.Fits too WB535 cars.Content:4 pieces: 6 x 15 x 5 mm2 pieces: 10 x 22 x 6 mm5 pieces: 10 x 19 x 7 mm8 pieces: 8 x 22 x 7 mm4 pieces: 12 x 28 x 8 mm2 pieces: 17 x 26 x 7 mm
Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece