68271 FG Mounting Nut for Front Axle 2WD/4WD, 2 pcs.

€7.50*

Available

Product number: fg_68271

EAN: 3410564533796

Product information "68271 FG Mounting Nut for Front Axle 2WD/4WD, 2 pcs."

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008.
or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.
There you will find the right spare parts for your vehicle.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

68277 FG Front driveshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 7,10 mmTotal length: 107,5 mmContents:1 piece

€15.90*

68216 FG Layshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 10 mmLength: 94 mmContents:1 piece

€13.90*

68253 FG Idler pulley 16mm, plastic

Genuine FG spare/option part. Contents:1 piece

€4.90*

68325/01, FG Servo saver spring blue

Springs with different hardnesses for servo saver item-no. FG 68420.Red = soft, for budget-priced RTR servos with plastic gear.Blue = medium, for high-quality competition servos.Content:1 piece

€6.90*

68323/03 FG Servo-Saver A/B, 80°

€10.90*

68205, FG Rear differential mount, l/h 2WD/4WD, plastic, 1pce.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€15.90*

68206, FG Rear differential mount, r/h 2WD/4WD, plastic, 1pce.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€15.90*

68268, FG A-arm hinge pin, front lower 2WD/4WD

Genuine FG spare/option part.Dimensions: 106mm x 6mmContents:2 piecesFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€17.90*

68250/01 FG Plastic front axle housing left, 1:6, 1 pce.

Item N° 68250/01 Plastic front axle housing left,1:6, 1 pce.This closed front axle housing reduces the entry of dirt in the belt drive. Suitable for all 4WD Off-Road and Monster models as well as for the 2WD Off-Road and Monster models WB535.

€21.90*

68326, FG Servo saver adjustment nut M10 4WD, 1 pce.

€6.90*

68324/01 FG Servo saver pivot 2010, 1 pce.

Item N° 68324/01 Servo saver pivot 2010, 1 pce.

€9.90*

68325 FG Servo saver spring red

Springs with different hardnesses for servo saver with item-no. FG 68420.Red = soft for RTR servos with plastic gear.Blue = medium for high-quality competition servos.Content:1 piece

€6.90*

Details

Customers also viewed

6079/05 FG Ball driving axle M8

Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

7020/15 FG Front bumper for BMW M4

Genuine FG spare/option part. Plastic Rammer for fixing the front body mounts for the BMW M4.Dimensions:Length: 120 mmWidth: 390 mmContents:1 piece

€29.90*

Challenge Line 2WD 530E Electric Audi A4 incl. ESC + Motor

Genuine FG spare/option part. The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Challenge Line models are equipped with a powerful 800 - 1300 kV brushless Motor and a 150A brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.The models are built on a 4mm aluminium chassis with rear wheel drive and double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.For all versions of the electric cars, the LiPo batteries and the matching charger, as well as the radio system and the steering servo (RTR) are required. In our shop selection, the RTR set is available for a surcharge.For hassle-free assembly, FG recommends using LiPo batteries 2x 2S or 2x 3S, with a maximum dimensions of 150 mm in length and 50 mm in width. The model comes with the EC8 connector system equipped.

From €849.90*

Configure now

TT1020 Top Tuning Adapter wheel nut for MadMax, HPI and Losi 5ive rims on Traxxas X-MAXX

Genuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi 5ive tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.LosiDBXL rims do not fit the X-Maxx (depth of hex is too deep)!Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

€19.90*

Details

68268, FG A-arm hinge pin, front lower 2WD/4WD

€17.90*

y3018 Stickerbomb "Monk"

Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on white film and have to be cut out by yourself.Size (Height x Width):Complete sheet: 300 mm x 410 mmContents:1 piece

€14.90*

69241 FG Plastic servo retainer small

Genuine FG spare/option part. Dimensions:Length: 67 mmWidth: 20 mmHeight: 38.5 mmServo cutout: 42.7 x 28.7 mmContent:1 piece

€10.90*