6203321 Roadies F3 Slick tire Formula 1 glued on white rim, rear, 2 pcs.
Product number:
clarks_6203321
EAN:
4058575036708
Product information "6203321 Roadies F3 Slick tire Formula 1 glued on white rim, rear, 2 pcs."
Roadies Formular 1 tire chart from the current series divided into 3 categories
The softer a tire compound - the better the performance, but the lower the durability.
If the vehicle tends to oversteer, this can be avoided by using a harder front tire!
In wet conditions you should use a rain tire which offers maximum grip under these circumstances.
With the use of Magic Rain, a tire traction compound, the grip can be further improved.
Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.
So find out which tire is the best for you!
1) Parking lot / hobby
The durability of the tire is the main focus here.2) Race track / hobby
Here you will find the tire that offers a compromise of durability and performance.3) Race track / competition
Here the racer will find the tires for best lap times on a race track and to win races.Note:
The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability.
Hint!
As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!
In wet conditions you should use a rain tire which offers maximum grip under these circumstances.
With the use of Magic Rain, a tire traction compound, the grip can be further improved.
Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.
So find out which tire is the best for you!
Please note: The Roadies tires come on white rims!
The ROADIES Tyre is a new development based on our successful experiences of the last couple of years. The complete four Tyre set weights about 1320g and the reduced diameter eliminates rotating mass at the outer edge of the tyre which is more effective than saving weight closer to the rotating axle, plus the tyres`lower profile make steering more precise especially through fast chicanes. After winning the 2012 European Championship we can promise you a winning capable Tyre for 2013 without having to change it throughout the season.
The PRO Tyre family makes use of our well proven European Championship winning rubber. This tyre works fine from 0° to 40° Celsius on dry tracks. It especially works best in medium to good grip conditions.
The OPTION Tyres` Family development started in June 2012 and is now market ready. It works best in a temperature range of 0° to 40° Celsius and shows its strength in poor grip conditions and dusty tracks. This Tyre is an ideal addition to the PRO compound and offers superior traction and safety. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
!! Attention, please take the following advice !!
- adjust rear camber to a maximum of 2.5° to reach maximum performance and gain tyre`lifetime
- pierce a small hole in the surface of the tyre to allowe it to breathe while heating up and cooling down. This is an essential point and it is very important to not only drill holes into the rims as the inserts are glued to the rims and as a result the tyre can only breathe through wholes in its own surface. So holes in both tyre surface and the underneath of the rim please. Do not worry about any damage to the tyre due to the holes. We have designed it to cope with this.
Login
Accessories / Spare parts
A must-have for 1/5 on-road racing! Even though it looks funny at first sight for uninitiated people! ;-) Just like in full-size racing our tires need a certain temperature to provide the necessary grip that is needed to achieve good lap times. Usually this means that the car will get really fast times only after a few laps. The driver who uses preheated tires has a considerably advantage. With cold outside temperatures or low grip tracks, like a not so clean parking lot, it often not possible at all to bring the tire temperature up to the required range just by driving. As a result the car will be difficult to control!Measures:maximum outer diameter of 150 mm maximum tire width of 110 mm That includes all standard 1/5th car tires! ( Formular 1 car tires ) Instructions: The tire warmers may be operated only on 12 to 13.8 volts AC or DC. In order to reach optimum operating temperature, a power supply with a 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 or the LRP 43200 Powersupply Competition power supply is the perfect solution for this application. The operation of the tire warmers directly from a 12 volt car battery (without Powerbase) is also possible, of course. In order to prevent damaging the filament inside the blanket, they must not be bent and not used without tires!Contents:1 pair
Similar products
Roadies Formular 1 tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!The 2012 Pro rear Slick Tire comes ready glued on white rims. The rubber is based on our sucesessfull 2010/11 pro tyre and uses the same compound. The insert has been modified to fit the new shape of the tire. Due to the slick surface the tyre performs better and has a decreased wear rate. Furthermore it offer better traction.The special feature of the 2012 rear tire is its weight reduction of 140 gramms per pair. This was achived by reducing the width by 11mm to 69mm. Due to this change the tyre offers some significant advantages, such as:- reduced tyre spinning mass- reduced volume- more stabilityResulting from those features the clutch has a lot less stress under acceleration; higher rpm will be reached; better traction out of the corner is achived; steering is gained; the front tyre wears less and the tyre performs in a more constant manner throughout the race. As the volume of the tyre is decreased by 25%, it reaches its optimum temperature earlier and keeps it more consistantly. No loss of front end grip will be suffered from anymore as the race proceeds. Furthermore, it is easier to reach good performance in low temperature conditions and the tyre wear is astonishing low.!! Atention, please take the following advice !!- reduce rear camber to a maximum of 1.5° to reach maximum performance and gain tyre`lifetime- pierce a small hole in the surface of the tyre to allowe it to breathe while heating up and cooling down. This is an essential point and it is very important to not only drill holes into the rims as the inserts are glued to the rims and as a result the tyre can only breathe through wholes in its own surface. So holes in both tyre surface and the underneath of the rim please. Do not worry about any damage to the tyre due to the holes. We have designed it to cope with this.
The special tool for Lightscale wheel nuts is simply inserted into the end of a spark plug wrench and is secured there by use of an o-ring. With its 3 hardened pins the tool locates into the wheel nut and may be used to tighten or untighten it. The tool is universally usable for all Lightscale wheel nuts.The kit contains the tool as well as the o-ring and hardened pins. The tool comes ready for use. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Wheel nut rear for F1 Cars using M6 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale toolto tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The kit contains two wheel nutsas well as four rifled conical washersOptional parts: Tool for Lightscale wheel nuts (item code two wheel nutsas well as four rifled conical washersOptional parts: Tool for Lightscale wheel nuts (item code 50100000)
y1372 Version:
y1372/01 One pair
A must-have for 1/5 on-road racing! Even though it looks funny at first sight for uninitiated people! ;-) Just like in full-size racing our tires need a certain temperature to provide the necessary grip that is needed to achieve good lap times. Usually this means that the car will get really fast times only after a few laps. The driver who uses preheated tires has a considerably advantage. With cold outside temperatures or low grip tracks, like a not so clean parking lot, it often not possible at all to bring the tire temperature up to the required range just by driving. As a result the car will be difficult to control!Measures:maximum outer diameter of 150 mm maximum tire width of 110 mm That includes all standard 1/5th car tires! ( Formular 1 car tires ) Instructions: The tire warmers may be operated only on 12 to 13.8 volts AC or DC. In order to reach optimum operating temperature, a power supply with a 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 or the LRP 43200 Powersupply Competition power supply is the perfect solution for this application. The operation of the tire warmers directly from a 12 volt car battery (without Powerbase) is also possible, of course. In order to prevent damaging the filament inside the blanket, they must not be bent and not used without tires!Contents:1 pair
Roadies Formular 1 tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!If it gets wet the ROADIES Heavy Wet Rain tire displays its strength. Its unique rubber compound in conjunction with the Eagle-like tread design provides optimal grip even at centimeter-high water on the track.The new Magic Rain Compound finally takes the worry out of driving in rain. Now the wet ride is fun.And so the RAODIES Heavy Wet was the key to victory in all wet races in recent years.Glued on white BBF rims.
Wheel nut front for F1 Cars using M8 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale tool to tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.The kit contains 2 wheel nuts as well as 4 rifled conical washers.Optional parts: Tool for Lightscale wheel nuts item code 50100000, Lightscale lexan disc item code 51009500 and spare rifled conical washers item code 881200058801. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Roadies Formular 1 tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Genuine Roadies spare/option part. 2015 ROADIES Tyres are improved and based on our successful experiences of the last couple of years, in which our tyres won the European Championships 2012/2013 and 2014. The complete four Tyre set weights about 1320 g and the reduced diameter eliminates rotating mass at the outer edge of the tyre which is more effective than saving weight closer to the rotating axle, plus the tyres` lower profile make steering more precise especially through fast chicanes. After winning the 2012, 2013 and 2014 European Championship we can promise you a winning capable Tyre for 2015 without having to change it throughout the season.The all new F1 compound is super soft and especially developed for cold temperatures like 0° to 20° Celsius while the F2 compound is to be compared to our 2014 Pro Tyre. This one works best from 10° to 25° Celsius. F3 is our 2015 code for the 2014 Option Tyre and works best from 15° to 40° Celsius.Contents:2 pieces
Wheel nut front for F1 Cars using M6 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale tool to tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.The kit contains 2 wheel nuts as well as 4 rifled conical washers.Optional parts: Tool for Lightscale wheel nuts item code 50100000, Lightscale lexan disc item code 51009500 and spare rifled conical washers item code 881200058801. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Customers also viewed
%
Inclusive: Zenoah G320RC y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch H105/01 Tuned pipe 2.0 for HPI - Baja 5B BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale Off-Road Buggy Ready for your 23-32cc RC engine Ready for your electronics Enclosed radio box Baja desert racing body design Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Race spec Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub
1 pair of Formula 1 tyres S3 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.
Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Durchmesser x Breite / diameter x width 145 x 80 mmRim with 18 mm square drive
Formular 1 tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Item N° GWK55E Ellegi Formula 1 extra soft rain front tires, glued - 2pcs.Typ GWK55E the rain tire for the front axle The most driven Formula 1 tires of the past years were modified for an better tire-to-wheel adhesion. The double tire adhesion on the outside is no longer necessary, only one tire lip has to be glued at this new series. Instead of the optical tire lip a plastic ring has to be glued on. The tires offered as ?glued? are professionally glued from GRP on the wheels and ready to drive. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Different type of tires:- Type GWK55A, the high grip front tire for warm ambient temperatures and fine to medium grit tarmac.- Type GWK55B, the medium grip front tire for medium to low ambient temperatures and coarse grit maybe soiled tarmac.- Typ GWK55E the rain tire for the front axle.Diameter: 140 mmWidth: 60 mmGlued on black rims.Glued by GRP on original Ellegi rim with 18 mm wheel square fits FG, Harm, RS5, Carson, Smartech, Nutech a.s.o
Wheel nut front for F1 Cars using M6 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale tool to tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.The kit contains 2 wheel nuts as well as 4 rifled conical washers.Optional parts: Tool for Lightscale wheel nuts item code 50100000, Lightscale lexan disc item code 51009500 and spare rifled conical washers item code 881200058801. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.