6099 FG Front shock mount

€13.50*

Available

Product number: fg_6099

EAN: 3410564506189

Product information "6099 FG Front shock mount"

Original FG Ersatz-/Tuningteil.

Suitable for all FG models except monster/stadium models with dual shock axles.

Inhalt:

1 Stück

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.

Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*

Similar products

6113 FG Wheel nuts M6 self-locking

Genuine FG spare/option part.Self locking wheel nuts with serrated base.Part is delivered in silver or black color from vendor!Contents:10 pieces

€7.30*

6096 FG Shock retaining screw M5

Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

6106/07 FG Wheel square 11,5mm - 2pcs.

Wheel squares with 3 mm dowel pins. The pins prevent the squares from damaging the rims under high load. For all FG rims, holes may have to be drilled.11,5mm wide.Bore diameter 8 mm18 mm square

€23.90*

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

6100/04 FG Turnbuckle left/right M8/40mm

Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€10.95*

6107 FG Wheel square 9,5mm/M6

Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 9,5 mm Width: 17 mmBore: 8 mmContent:1 pieces:

€15.90*

6107/02 FG wheel square 17 mm/M6

€16.90*

6100 FG Front wishbone 2WD

Genuine FG spare/option part. Standard plastic wishbone for all 2WD FG off road models except Leopard race and monster/stadium models with dual shock axles.Contents:1 piece

€17.50*

6094/01 FG Damper spring rear 2,2 x 100 mm

Genuine FG spare/option part. Suitable for 6083 and 6481.Dimensions:Length: 100 mmWire diameter: 2,2 mmOuter diameter: 25 mmContents:1 piece

€7.90*

6115 FG Wheel nuts M8 with clamping

Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Contents:10 pieces

€6.90*

6104 FG Front axle shaft, 55mm - 1pce.

Genuine FG spare/option part. Suitable for all FG models. Only useable with 9,5mm square driver.Diameter 8 mm.Contents:1 piece

€6.50*

Customers also viewed

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.

Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*

7068 FG Rear axle riser plate - 1pce.

€11.10*

Elcon 14404, front shock tower for FG Monster Truck 2WD

CNC-milled aluminum version, suitable for the old version of the FG 2WD monster and stadium models. These vehicles were distinguished by coming from the factory with four shocks each front and rear. The shock tower comes complete with mounting hardware and four quick-release mounts for the upper shock ends.

€79.90*

8466 FG Front axle 65 mm

Genuine FG spare/option part. Dimensions:Length: 65 mmThread length: approx. 12 mmLength from thread to clip: approx. 47 mmSpace between clips: approx. 4 mmDiameter: 8 mmContents:1 piece

€13.50*

6716/16 FG Pan-head tapping screws 4,2x16 mm, 15 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.90*

FG Sportsline 2WD-465 with Porsche GT2 body shell, 23cm³ Engine

The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm Touring cars in action!Painting tips:

From €1,159.95*

Configure now

7323/13 FG Starter handle for all CY / Zenoah

Genuine FG spare/option part.Contents:1 piece

€11.50*