Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

8092 FG Shock fastening pin/set collar

Product information "8092 FG Shock fastening pin/set collar"

Item N° 8092
Shock fastening pin/set collar.


Black-finished steel pin. Fits for older Sportsline models, 4 mm diameter x 56 mm long.
Comes with two 4 mm set collars, 8 mm outer diameter x 5 mm wide.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6099 FG Front shock mount
Original FG Ersatz-/Tuningteil.Suitable for all FG models except monster/stadium models with dual shock axles.Inhalt:1 Stück

€13.50*

Average rating of 0 out of 5 stars

7201/05 FG Guiding set
Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€7.50*

Average rating of 0 out of 5 stars

7087/02 FG Lower shock retaining long - 2pcs.
Spare part for , , , , , , , , and .

€4.70*

Average rating of 0 out of 5 stars

8013 FG Body mount middle for Audi. Calibra ITC
Genuine FG spare/option part. A = 113 mmB = 15 mmC = 9,4 mmContents:2 pieces

€14.50*

Average rating of 0 out of 5 stars

7021 FG Plastic parts roll cage each
Genuine FG spare/option part. Suitable for the following roll cages:70227024/01For tubes with a 10 mm outer diameter and 1 mm wall thickness.

€17.90*

Similar products

Average rating of 0 out of 5 stars

8064 FG Roll cage set for BMW E30
Genuine FG spare/option part. Suitable for BMW E30.For the assembly the mounts FG no. 5013 and 8013 are required.Contents:1 set

€59.00*

Average rating of 0 out of 5 stars

8042/01 FG Rear wing support 2WD/4WD, 530, 1/5
Genuine FG spare/option part.Keeps the rear wing from bending downwards under high downforce.Contents:1 setFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

Average rating of 0 out of 5 stars

8042 FG Rear wing support 1:5
Genuine FG spare/option part. Keeps the rear wing from bending downwards under high downforce.Contents:1 piece

€19.50*

Average rating of 0 out of 5 stars

8093 FG Brake cable bracket - 1pce.
Spare part for , , , , and .

€5.50*

Average rating of 0 out of 5 stars

8059 FG Body set BMW M3 E30, clear 2 mm
Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is clear.Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piecePainting tips:

€235.50*

Average rating of 0 out of 5 stars

8063/01 FG BMW M3 E30 Team decals
Genuine FG spare/option part. Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.
y0054 Type: y0054/01
Part No.: y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.Available in several sizes.Aluminum tube struts for construction of roll bars, battery holders and other useful things.The struts have various bores with 2 mm diameter. Similar to picture.Item N°Internal dimension:External dimensions:Länge:y0054/018,2 mm10 mm150 mmy0054/028,2 mm10 mm180 mmy0054/038,2 mm10 mm190 mmy0054/048,2 mm9,6 mm225 mmy0054/058,2 mm10 mm190 mmy0054/068,2 mm10 mm200 mmy0054/078,2 mm10 mm170 mmy0054/088,2 mm10 mm215 mmy0054/098,2 mm10 mm300 mm

€5.90*

Average rating of 0 out of 5 stars

8077 FG Front body Alfa Romeo 156 WTCC - 1 pcs
Spare part for 8075 and 8075/01Painting tips:

€51.70*

Average rating of 0 out of 5 stars

8079/01 FG Vehicle decal set FG Alfa Romeo, set
Alfa Romeo decals for front and rearheadlights, radiator a.s.o., with FG labels.Sheet dimensions:305 x 210 mm

€46.50*

Average rating of 0 out of 5 stars

8063 FG BMW M3 E30 decal set
Genuine FG spare/option part. Dimensions: Decal 1 (main decal): approx. 500 x 300 mm Decal 2 (window decal): approx. 320 x 430 mm Decal 3 (window decal blue): approx. 250 x 85 mm Decal 4 (light decal): approx. 110 x 20 mm Contents:1 set

€74.70*

Average rating of 0 out of 5 stars

8043 FG Rear wing support 09 Evo/Competition, set.
Fits for FG Evolution / Competition with the new 09 short chassis.

€22.45*

Average rating of 0 out of 5 stars

8081 FG Steel ball 10x9.5mm - 2pcs.

€5.90*

Customers also viewed

Average rating of 0 out of 5 stars

8450/05 FG Front tuning disk brake for nearly all FG-models
Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining

€169.95*

Average rating of 0 out of 5 stars

8042/01 FG Rear wing support 2WD/4WD, 530, 1/5
Genuine FG spare/option part.Keeps the rear wing from bending downwards under high downforce.Contents:1 setFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

Average rating of 0 out of 5 stars

FG Sportsline 4WD-510 with Mini Cooper body HT-Edition
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Mini Cooper is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted Mini Cooper bodyshell , 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 780 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTouring cars in action!Painting tips:

From €1,389.95*

Average rating of 0 out of 5 stars

y1330 BMW 320si WTCC 1/5 body shell, painted, 535 wheelbase, white/light blue
Genuine HT spare/option part.Fits 535 mm wheel base, current touring car width. A rear wing is available through the shop's options menu. The body shell comes without decals!Required body mounts:Front section: FG 7020/11 Front bumperRear body mount: FG 7152/01 Rear body supportSide front: FG 7012 Body mountSide rear: FG 7014 Body mountAvailable decal sheets:y1329 - Vehicle decalsy1320/01 - Team decals Posty1329/02 - Team decals Samsungy1329/03 - BMW-Bank decalsy0683 - Jägermeister decalsy3006 - rc-car-online decalsDimensions:Length: 885 mmWidth: 392 mmHeight: 260 mmWheel base: 530 mm

€99.90*

Average rating of 0 out of 5 stars

6100/04 FG Turnbuckle left/right M8/40mm
Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€12.50*

Average rating of 0 out of 5 stars

8042 FG Rear wing support 1:5
Genuine FG spare/option part. Keeps the rear wing from bending downwards under high downforce.Contents:1 piece

€19.50*

Average rating of 0 out of 5 stars

- GWH05-XM2 GRP Slick W05 XM2 Tyres Medium
This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency