Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6072/01 FG Rear lower wishbone adjustable for 1:6

Product information "6072/01 FG Rear lower wishbone adjustable for 1:6"

Genuine FG spare/option part. 

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y04492 HT Rear lower alloy wishbone for FG 1/6 cars
Genuine HT spare/option part.Please note: must use hinge pins 6075 instead of 6073!Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

7072/01 FG Adjustable rear lower wishone for 1:5
Genuine FG spare/option part.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

y04472/05 HT Rear lower alloy wishbone narrow
Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y68401 Rear lower alloy wishbones 2+4WD, set
Set contents rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for Off-Road Buggy 2+4WD RTR, Off-Road Beetle 2+4WD RTR and Monster/ Stadium models 2+4WD RTR, 2+4WD Porsche.

€199.90*

Average rating of 0 out of 5 stars

y68401/01 Rear lower alloy wishbones small, set
Rear lower alloy wishbones salon cars, setSet contents small rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for 4WD Mini Cooper and for FG 2WD Touringcar like the Sportsline or the Ecoline too. Or suitable for all 1:5 models with a width up to 400mm.

€199.90*

Average rating of 0 out of 5 stars

y0315 Elcon Aluminum a-arms, rear lower, for FG Evo and Sportsline, truck width, pair
Rear lower a-arms for all FG Evo cars (except 2020 series) that will bring the car to Race Truck width. The arms can also be installed as an upgrade in Sportsline trucks up to and including the 13 series. The arms are compatible with all other FG parts like uprights, Evo shock mounts and Evo stabilizer bar.Due to the increased width you will also need longer driveshafts turnbuckles for the upper a-arms and shock shafts for installation in an existing Evo. When upgrading a Sportsline truck to the Evo parts you will need a complete Evo stabilizer bar and shock mounts, rose joints and conical spacers instead. Regular price: 129.90 EURSpecial offer: 89.90 EURContents:2 pieces

€89.90*

Accessories / Spare parts

Average rating of 0 out of 5 stars

y04492 HT Rear lower alloy wishbone for FG 1/6 cars
Genuine HT spare/option part.Please note: must use hinge pins 6075 instead of 6073!Contents:1 piece

€49.90*

Customers also bought

Average rating of 0 out of 5 stars

- GWH04-XM3 GRP W04 REVO XM3 Tyres Hard
This pair of Tyres have the following use indications: VERY HIGH GRIP situation for very clean track. VERY HIGH GRIP situation for big asphalt. VERY HIGH GRIP situation for very high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

Average rating of 0 out of 5 stars

- GWH04-XM2 GRP W04 REVO XM2 Tyres Medium
This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

Average rating of 0 out of 5 stars

6029/08 FG Ball-and-socket joint for M8
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

7201/05 FG Guiding set
Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€6.90*

Average rating of 0 out of 5 stars

y1419/01 Clutch spring 6.000 1 / min for the Sintered clutch for Zenoah, Chung Yang, Losi, HPI & Co.
Clutch spring for about 6,000 1 / min. for the OEM clutches from Zenoah and many other rc-car engines from 23 cm³ - 32 cm³.Content:1 piece

€5.90*

Average rating of 0 out of 5 stars

8013 FG Body mount middle for Audi. Calibra ITC
Genuine FG spare/option part. A = 113 mmB = 15 mmC = 9,4 mmContents:2 pieces

€13.90*

Similar products

Average rating of 0 out of 5 stars

6065/01 FG Plastic diff. cover
Original FG Ersatz-/Tuningteil.Well-priced but still effective plastic diff. cover. Stones can damage metal covers and it is difficult to removethem. According to the flexible plastic material an impressing becomes hardly possible. If it still happens the cover can be easily removed through cutting with a knife or a scissors.Dimensions:Length: 43 mmDiameter: 45 mmFlange diameter: 65 mmInhalt:1 Stück

€6.90*

Average rating of 0 out of 5 stars

6077/05 FG Steel ball 10x13mm for rear upright - 2pcs.
Steel ball for rear upright.5 mm bore diameter

€8.50*

Average rating of 0 out of 5 stars

6081/01 FG Steel ball Ø5mm 10x15 mm
Genuine FG spare/option part. Ball joint with 5mm bore suitable for all FG plastic ball-and-socket joints.Contents:4 pieces

€16.90*

Average rating of 0 out of 5 stars

6079/05 FG Ball driving axle M8
Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

Average rating of 0 out of 5 stars

6069/01 FG Differential axle spline drive
Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€27.90*

Average rating of 0 out of 5 stars

6077/08 FG Spacer bushing for rear upright
Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.50*

Average rating of 0 out of 5 stars

6064 FG Differential case
Genuine FG spare/option part. Stock plastic differential case. Also available in aluminum.Dimensions:Length: 70 mmDiameter: 42.5 mmFlange diameter: 65 mmBearing seats: 12 x 8 mmShaft bore: 8 mmInner dimensions: 40 x 30 mmContents:1 piece

€25.50*

Average rating of 0 out of 5 stars

6065 FG Differential tube
Genuine FG spare/option part. Stock aluminum differential tube with a wall thickness from 1 mm.Also available as a reinforced version.Dimensions:Length: 43 mmOuter diameter: 45 mmContents:1 piece

€11.90*

Average rating of 0 out of 5 stars

6076/01 FG Rear camber rod 61 mm
Genuine FG spare/option part. M8 turnbuckle.Contents:2 pieces

€13.90*

Average rating of 0 out of 5 stars

6073 FG Rear lower wishbone pin
Genuine FG spare/option part. Also available in titanium 4510 and hardened steel 6073/05.Dimensions:Diameter: 6 mmLength: 63 mmContents:2 pieces

€8.90*

Average rating of 0 out of 5 stars

6077/02 FG Screws M5x30 mm for rear uprights
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Contents:4 pieces

€2.95*

Average rating of 0 out of 5 stars

6080 FG Rear dogbone
Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€17.90*

Customers also viewed

Average rating of 0 out of 5 stars

7072/01 FG Adjustable rear lower wishone for 1:5
Genuine FG spare/option part.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

6080/01 FG Ball drive shaft rear 96,5 mm
Genuine FG spare/option part. Same applications as 6080, just for ball drive system!Dimensions:Shaft diameter: 6,5 mmBall diameter: 12 mmLength: 96,5 mmContents:1 piece

€19.95*

Average rating of 0 out of 5 stars

6075 FG Rear upper wishbone pin
Genuine FG spare/option part. Dimensions:Diameter: 6mmLength: 65mmand hardened steel: Contents:2 pieces

€8.95*

Average rating of 0 out of 5 stars

9014 FG Body mounts
Genuine FG spare/option part. Contents:2 piece

€15.10*

Average rating of 0 out of 5 stars

7072/02 FG POM Adjustable rear lower wishone for 1:5
Genuine FG spare/option part.Contents:1 piece

€51.60*

Average rating of 0 out of 5 stars

y04472/05 HT Rear lower alloy wishbone narrow
Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

7039/01 FG Gear plate 97 - 1pce.
Also available in .Current version for brake with one large disc.

€19.80*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development