Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0315 Elcon Aluminum a-arms, rear lower, for FG Evo and Sportsline, truck width, pair

Product information "y0315 Elcon Aluminum a-arms, rear lower, for FG Evo and Sportsline, truck width, pair"

Rear lower a-arms for all FG Evo cars (except 2020 series) that will bring the car to Race Truck width. The arms can also be installed as an upgrade in Sportsline trucks up to and including the 13 series.

The arms are compatible with all other FG parts like uprights, Evo shock mounts and Evo stabilizer bar.

Due to the increased width you will also need longer driveshafts turnbuckles for the upper a-arms and shock shafts for installation in an existing Evo.

When upgrading a Sportsline truck to the Evo parts you will need a complete Evo stabilizer bar and shock mounts, rose joints and conical spacers instead.

Regular price: 129.90 EUR
Special offer: 89.90 EUR

Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

11801 Stabilizer mount front, 5 mm for FG Evo
Stainless steel stabilizer mount for FG EVO a-arms (except 2020 series!), complete with installation hardware.M6 thread, for 5 mm stabilizer bar, one side with slotted hole for fine adjustment of the height.Contents:2 pieces

€13.90*

Average rating of 0 out of 5 stars

18801 Stabilizer mount rear, 4 mm for FG Evo
Stainless steel stabilizer mount for FG EVO a-arms (except 2020 series!), complete with installation hardware. M5 thread, for 4 mm stabilizer bar.Contents:2 pieces

€13.90*

Average rating of 0 out of 5 stars

Elcon 18605 Carrier layshaft, 1 pce.
Item N° Elcon 18605 Carrier layshaft, 1 pce.Carrier for the layshaft.Fits all Elcon drive trains.

€42.50*

Average rating of 0 out of 5 stars

50550/06 Return spring (diff brake) Cleon

€1.25*

Average rating of 0 out of 5 stars

18410F, elcon servo saver replacement spring, soft, 1 pce.
Fits elcon servo saver only

€4.90*

Average rating of 0 out of 5 stars

50505 Wishbone mount, Cleon

€17.80*

Average rating of 0 out of 5 stars

13401/13402 Lower front a-arms front for FG Marder, FG Buggy with rose joints a.s.o.
Lower front a-arms for all cars of the Marder family. Made from high quality aluminum, the arms are light weight, stiff and durable. They feature plastic bushings for the hinge pin and come with the required set of rose joint and conical spacer inluded.Contents:1x L/h a-arm with hardware1x R/h a-arm with hardware2x Rose joints4x Conical spacers

€129.90*

Average rating of 0 out of 5 stars

50550/03 Brake pad (diff brake) Cleon, set

€10.85*

Average rating of 0 out of 5 stars

50132 Shaft for wing mount Cleon, 1 pce.

€9.50*

Average rating of 0 out of 5 stars

15507, elcon Evo 04 XL a-arms, adjustment section l/h, 1 pce.
Fits the elcon Evo 04 XL a-arm main section.

€26.35*

Average rating of 0 out of 5 stars

15508, elcon Evo 04 XL a-arms, adjustment section r/h, 1 pce.
Fits the elcon Evo 04 XL a-arm main section.

€26.35*

Average rating of 0 out of 5 stars

50415/11 Steering lever (slave) Cleon

€14.75*

Customers also viewed

Average rating of 0 out of 5 stars

HT Aluminum rear suspension conversion kit for FG 1/5 Sportsline 2WD cars, y0991, set, SO
Alloy rear axle conversion kit for all FG 1/5 Sportsline cars except Formula 1 and Race Truck.The set includes:- rear plate- differential mounts- riser plates- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075 instead of 6073!

€319.90*

Average rating of 0 out of 5 stars

13401/13402 Lower front a-arms front for FG Marder, FG Buggy with rose joints a.s.o.
Lower front a-arms for all cars of the Marder family. Made from high quality aluminum, the arms are light weight, stiff and durable. They feature plastic bushings for the hinge pin and come with the required set of rose joint and conical spacer inluded.Contents:1x L/h a-arm with hardware1x R/h a-arm with hardware2x Rose joints4x Conical spacers

€129.90*

Average rating of 0 out of 5 stars

11403, elcon a-arm, touring car/GT, upper front - 1pce.
Upper a-arm, for M6 balljoints, adjustable camber, hardware included.

€39.95*

Average rating of 0 out of 5 stars

TT5013 Top Tuning complete Installation set for Losi 5iveT/B and Mini with original Losi Spektrum/ ESC
Complete set with all required installation parts!50% more power than aZenoah G320 engine! Spektrum Firma® 160 Amp Brushless SMART ESC The ESC is waterproof, completely programmable, and comes pre-wired with a high-current IC5 connector. The ESC will work with most sensorless brushless motors and is Li-Po and Ni-MH compatible. The SMART technology provides information like battery voltage, RPM, RX pack Voltage, and Speed directly from the ESC when used with the Spektrum Dashboard app. 50+ MPH Spektrum Firma 4-Pole 780Kv Brushless Motor The brushless ESC and motor provide wicked power with an 8s LiPo battery (not included) that will blaze speeds of 50+ MPH. Perfect option for 1/5th scale models looking to run a 8S Lipo powered setup. Featuring a low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing with heat sinking fins, insulated high purity copper windings, high-quality alloy steel 8mm output shaft, and high-precision bearings for high durability and smooth rotation. Preinstalled with 6.5mm gold plated bullet connectors. Perfectly matched to the Firma 160 Smart ESC. FAST, POWERFUL M4 PROCESSOR The Firma ESCs' 32-bit M4 processor produces higher resolution signal input and more accurate motor output. TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.This conversion kit is for the Losi 5iveT/B and Mini. The conversion kit for the Losi 5ive-T 2.0 has the order number TT5014 Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding adapter cables! Contents: SPMXSM1100 Spektrum Firma 780Kv Brushless Motor SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8S Motor mount with your choice of rear clamp Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands 4 hook-and-loop bands to secure the batteries aluminum mounting pedestals for the battery plate 17T pinion with 8 mm bore diameter Mounting screws

€769.90*

Average rating of 0 out of 5 stars

y0669 Rear alloy upright for 1:5 and 1:6 models
Genuine HT spare/option part. Rear alloy uprights for 1:5 and 1:6 models and 4WD Porsche, CNC-cut, optimal fitting, non-twisting even by heat.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 20 mmContents:1 set

€89.90*
%

Average rating of 0 out of 5 stars

68511 FG Electric conversion kit 1:5 2WD with Wheelbase 465 to 535, set
Item N° 68511 Electric conversion kit 1:5 2WD with Wheelbase 465 to 535, setSuitable for the 2WD Touring sports cars and 2WD Race Trucks with a wheel base of 465 mm and 530/535 mm.This conversion kit is suitable for the 2WD 1:5 touring and sportscar models with 465mm - 530mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries.Cruise control, BL engine and LiPo batteries are not included.During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine. For easy mounting we recommend LiPo batteries with a max. length of 150mm and 50mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.

€189.99* €199.99* (5% saved)
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency