6072/02 FG Rear lower wishbone adjustable for Monster-Truck

€19.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6072_02

EAN: 3410564505779

Product information "6072/02 FG Rear lower wishbone adjustable for Monster-Truck"

Genuine FG spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y04492 HT Rear lower alloy wishbone for FG 1/6 cars

Genuine HT spare/option part.Please note: must use hinge pins 6075 instead of 6073!Contents:1 piece

€49.90*

y68401 Rear lower alloy wishbones 2+4WD, set

Set contents rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for Off-Road Buggy 2+4WD RTR, Off-Road Beetle 2+4WD RTR and Monster/ Stadium models 2+4WD RTR, 2+4WD Porsche.

€199.90*

Accessories / Spare parts

y04492 HT Rear lower alloy wishbone for FG 1/6 cars

Genuine HT spare/option part.Please note: must use hinge pins 6075 instead of 6073!Contents:1 piece

€49.90*

Similar products

6069/01 FG Differential axle spline drive

Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€27.90*

6065/01 FG Plastic diff. cover

Original FG Ersatz-/Tuningteil.Well-priced but still effective plastic diff. cover. Stones can damage metal covers and it is difficult to removethem. According to the flexible plastic material an impressing becomes hardly possible. If it still happens the cover can be easily removed through cutting with a knife or a scissors.Dimensions:Length: 43 mmDiameter: 45 mmFlange diameter: 65 mmInhalt:1 Stück

€6.90*

6081/01 FG Steel ball Ø5mm 10x15 mm

Genuine FG spare/option part. Ball joint with 5mm bore suitable for all FG plastic ball-and-socket joints.Contents:4 pieces

€16.90*

6077/05 FG Steel ball 10x13mm for rear upright - 2pcs.

Steel ball for rear upright.5 mm bore diameter

€8.50*

6079/05 FG Ball driving axle M8

Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

6080 FG Rear dogbone

€17.90*

6075 FG Rear upper wishbone pin

Genuine FG spare/option part. Dimensions:Diameter: 6mmLength: 65mmand hardened steel: Contents:2 pieces

€8.95*

6077/08 FG Spacer bushing for rear upright

Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.50*

6064 FG Differential case

Genuine FG spare/option part. Stock plastic differential case. Also available in aluminum.Dimensions:Length: 70 mmDiameter: 42.5 mmFlange diameter: 65 mmBearing seats: 12 x 8 mmShaft bore: 8 mmInner dimensions: 40 x 30 mmContents:1 piece

€25.50*

6078 FG Ceramic ball bearings, sealed 8x22x7 mm

Genuine FG spare/option part.Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Wheel bearing suitable for all FG and Carson models.Contents:2 pieces

€19.90*

6065 FG Differential tube

Genuine FG spare/option part. Stock aluminum differential tube with a wall thickness from 1 mm.Also available as a reinforced version.Dimensions:Length: 43 mmOuter diameter: 45 mmContents:1 piece

€11.90*

6057 FG Window grid r/h

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195 mmHeight: 80 mmContents:1 piece

€15.90*

Customers also viewed

6096 FG Shock retaining screw M5

Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*

7070/01 FG Rear shock stay 97 - 1pce.

Genuine FG spare/option part. Rigid plastic rear plate. Fits all FG 2WD cars except Evo/Competition and Formula 1.Content:1 Piece

€22.50*

y1403/01 MadMax OVER LANDER 170x80/x60 tires for FG/Smartech and other (18 mm square drive)

OVER LANDER 170 x 80 mm and 170 x 60 mm tires with reinforced orange beadlock rings were designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the Overlander is the right choice! It can even be used on partially paved tracks!Of course, the OVER LANDER allround tire will not make special purpose tires like the TARMAC BUSTER,BIG DIGGER or CROSS BOND obsolete. Due to the extreme load created by the MadMax OVER LANDER tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 18 mm square wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

€119.90*

Configure now

6000c FG Marder 2WD

The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

€699.95*

Configure now

6100 FG Front wishbone 2WD

Genuine FG spare/option part. Standard plastic wishbone for all 2WD FG off road models except Leopard race and monster/stadium models with dual shock axles.Contents:1 piece

€17.50*

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now