500608156 Carson Battery Racing Pack 3S 11,1V / 3100 mAh LiPo 40C
€49.90
Available
Product information "500608156 Carson Battery Racing Pack 3S 11,1V / 3100 mAh LiPo 40C"
This is the genuine Carson CY-Eline series sars drive battery.
Contents:
- 1 piece
| Warning:- Use only under direct supervision of adults- Charge only in a suitable charging bag / protective bag- Do not store battery discharged (at least 50% charge is recommended) |
Login
Accessories / Spare parts
Genuine Top Tuning spare/option part. Dimensions:Length: 420 mmWidth: 20 mmContents:2 pieces
Genuine Top Tuning spare/option part.For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece
T-connector male / female with spring loaded 4 mm contact.Select from:y1301/01 - male connectory1301/02 - female connectory1301/03 - one each male and female connector
Charging cord for batteries with T-connector; cable length 300 mm, silicone insulated cable with gold-plated connectors.
Adapter cable T male to EC5 female.Dimensions:Length cable: 50 mmTotal length: 85 mmContent:1 piece
Genuine rc-car-online spare/option part. Compatible with up to 8S lithium batteries. In addition to the LiPo Tester, the CellMeter also has a built-in servo tester. This makes it possible to check at any time whether the servos are working properly.Technical data:High visibility LCD displayBalancer functionDischarge functionVery accurate battery checkSuitable for Li-Ion, LiPo, LiFe, LiHv, NiCd, NiMh batteries (up to 8 cells)Battery type and Zellenanzahl will be recognized automaticallyVoltage displayed individually for every cellWeight: 48gDimensions LxWxH: 84 mm x 52 mm x 15 mmContents:1 piece
Alternatives
Rc-car LiPo hardcase battery with XH balancer connector and cable with T-connector (link to the T-connector). Battery conector:Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesCan be charged with 5C when time is criticalRecommended charge with 2 3CPArt numberLiPo-Battery typeCable cross sectionCaseCapacity mAhVoltWidth +/- 1,5 mmHeight +/- 1,5 mmLength +/- 5 mmWeight +/- 10gCont. currentPeak currenty1300/023 S / 2 P12AWG/3,3hart6.00011,138,046,5137,546240C(240A)80C(480A)y1300/034 S / 2 P12AWG/3,3hart5.50014,848,046,5137,555840C(220A)80C(440A)y1300/046 S / 1 P10AGW/5,27soft5.20022,248,046,0155,070845C(189A)90C(378A)y1300/063 S / 2 P10AWG/5,27soft6.00011,144,033,0137,042440C(240A)80C(480A)
Genuine Carson spare/option part. Dimensions: Width: 45 mm Length: 136 mm Height: 25 mm Weight: 294 mm Contents:1 piece
Customers also viewed
Genuine ARRMA spare/option part. Contents:4 pieces
The original item 32555 is no longer available. Alternatively, you can use item FG 7088.
This battery is primarily intended as a power source for electric on-board starter units.Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CDimensions: Length +/- 5 mm: 110 mmWidth +/- 1,5 mm: 49 mmHeight: +/- 1,5 mm: 34 mmWeight +/- 10g: 371gConnectors: T-Connector, XH-balancer. Battery color may vary!Contents:1 piece
2-Cell 7.4V 2200mAh LiPo Transmitter BatteryThis is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands. Fits Futaba Transmitters: T4PM T4PLS T4GRS T4PV T4PX T6KT7PX T7XC (tight fit) T8J T10JT10PX T12K T14SG T16SZ T18SZ FX20 FX36 Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt. Specs: Type: LiPo Transmitter Battery Power Connector: Futaba Power Wire: 22AWG Balance Connector: JST-XH Battery: 2S1P LiPo Nominal Voltage: 7.4V/2S Max Charge Voltage: 4.2V/Cell Mac Charge Current: 2.2A (1C) Capacity: 2200mAh Energy: 16Wh Storage Voltage: 3.7-3.8V/cell Size: Length: 73mm Width: 45mm Thickness: 15.5mm Weight: 98g Tech Notes: Charge the battery outside the transmitter with a LiPo balance charger equipped with an Futaba adapter lead and XH balancing connector Set the charger to "LiPo", 2s, 3.7v/cell
Genuine Dynamite spare/option part. Dynamite's new Reaction 2.0 batteries come with all the power and performance you've come to expect from the original Reaction line, but now include a QR code directly on the battery label. You can scan the QR with the Dynamite Dashboard Smart Phone App for even quicker and easier setup. In addition, all Reaction 2.0 hardcase batteries now come in a sleek black color to better match whatever setup you use them in. Features: Balance Lead Length: 2.16 in (55mm) Battery Balance Connector: JST-XH Battery Type: LiPo Battery Voltage: 14.8V Capacity: 5000mAh Cell Configuration: 4S1P Charge Protection Circuitry: No Connector Type: EC5 Discharge Lead Length: 3.54 in (90.0mm) Hard Case: Yes Height: 1.89 in (48mm) Length: 5.47 in (139mm) Maximum Charge Current: 15A Maximum Charge Rate: 3C Maximum Continuous Discharge Rate: 50C Normal/Standard Charge Current: 5A Normal/Standard Charge Rate: 1C Watt Hours: 74.0Wh Width: 1.89 in (48mm) Wire Gauge: 12 AWG Contents:1 piece