3109 FG Rear rim insert Trucks

€17.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_3109

EAN: 3410564501962

Product information "3109 FG Rear rim insert Trucks"

Genuine FG spare/option part.

Required for scale rim appearance. Suitable for 3105/02.

Dimensions:

Outside diameter: 100 mmInside diameter: 25 mm

Content:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

3105/01 FG Rim 1:6 silver - 2pcs.

Item N° 3105/01 Rim 1:6 silver - 2pcs.Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero).Rim with 18 mm square driveBulk:Diameter: 120 mmWidth: 61 mm

€14.40*

Details

Customers also bought

3108 FG Front rim insert Trucks

Genuine FG spare/option part.Required for scale rim appearance.Suitable for FG no.: 3105/02.Dimensions:Outside diameter: 100 mmInside diameter: 25 mmContents:2 pieces

€17.90*

TT1530/255s Top Tuning 5500mAh HV LiPo battery 2S, 7,6V, shorty-receiver battery 100C

Absolute premium quality receiver battery from Top Tuning!Typical properties Voltage: 7.6V Capacity: 5500mAh Watt hours: 37.0Wh Cell Configuration: 2S1P Battery type: LiPo HV Maximum continuous discharge rate: 100C Maximum charge rate: 2C Maximum charge current: 11.0A Hard Case: Yes. Connector type: T-Plug Cable cross section: 12 AWG Balancer connection: JST_XH Dimensions: length: 96 mm Width: 47 mm Height: 25 mm Weight without cable: 212g Weight with cable: 229g Contents:1 piece

€89.90*

T2070-15110 Genuine Zenoah exhaust muffler

Genuine Zenoah spare/option part. Genuine Zenoah steel muffler for G230 / G240 / G260 / G270 / G290 / G320 engines. Fits CY23 / CY26 / CY27 / CY29 / GP290 engines and various similar engines with a mounting hole spacing of 34 mm.Contents:1 piece

€7.90*

Carburetor Walbro WT 1107 with choke normal/ball-raced

Walbro Vergaser WT1107 with choke Standard carburetor for Zenoah G320. Typ: Walbro WT1107This is the stock carburetor used for the G320RC engine, and will also work on all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³. Dimensions:Bore: 15,88 mmVenturi: 13,5 mmIndependent tunable high and low speed jets.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23 cm³ up to over 30 cm³.

€69.90*

Configure now

3438 FG Body detailing kit Truck

Genuine FG spare/option part.Contents:1 set

€19.90*

9466/05 FG Foam filter insert, 2 pcs.

For the new fg airbox no. 9466 and no. 9467

€17.50*

Similar products

4412 FG Driveshaft boots

Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€18.50*

Details

4173/01 FG Vehicle decals Audi R8 LMS

Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Contents:1 set

€49.90*

3262/01 FG Vehicle decals set CAT-Truck

Genuine FG spare/option part.Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:435 x 145 mmContents:1 piece

€16.10*

3438 FG Body detailing kit Truck

Genuine FG spare/option part.Contents:1 set

€19.90*

3259 FG Body set Street Truck 4WD

Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€269.10*

Details

4152/01 FG Audi A4 DTM flaps

Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€51.70*

4404/07 FG Axially alloy upright 09, displaced, right

Genuine FG spare/option part.Contents:1 piece

€55.70*

4170 FG Main part Audi R8 clear

Genuine FG spare/option part. Contents:1 piece

€143.95*

3280/01 FG Body Set FG Team Truck 4WD

Genuine FG spare/option part.Contents:1 piecePainting tips:

€158.50*

4402 FG Alloy steering stop for alloy uprights

Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.20*

4153/01 FG Vehicle decals Audi A4 DTM

Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Dimensions:500 x 350 mm230 x 75 mmContents:1 set

€39.50*

Customers also viewed

FG Sportsline 2WD-530 with Super Street Truck body and HT-Edition

Former: "Mercedes 1834" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*

Configure now

y1080 Painted Ford Mustang body shell 530/535 wheelbase

Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan.Measures:Length: 890 mmWidth: 392 mmHeight: 220 mmRequired body mounts:Mount front: FG 7020/16 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts

€79.90*

Configure now