Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-278 Mecatech Additional chassi stiffening brace

Product information "2012-278 Mecatech Additional chassi stiffening brace"

Genuine Mecatech spare/option part.

Mecatech 2018 tuning part, used by all the drivers during the European Championship 2018. Making the chassis perform even more consistent on tracks with average or high grip conditions.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

2012-266 Mecatech Kit front lower engine mount
Genuine Mecatech spare/option part. Spare part for Mecatech 2012-265.Contents:1 piece

€58.90*

Average rating of 0 out of 5 stars

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-128 Mecatech Bush for rear Wheel toe in 4°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-202 Mecatech Brake UHB front standard 14 mm
Genuine Mecatech spare/option part for the FW01.With a special mount for the brake disk.Content:2 pieces

€55.70*

Average rating of 0 out of 5 stars

2012-205 Mecatech Special brake disk
Genuine Mecatech spare/option part for the FW01.Suitable for the special carrier: 2012-202, 2012-203, 2012-204.Content:2 pieces

€28.20*

Average rating of 0 out of 5 stars

2012-223 Mecatech Clutch pinion 34 teeth
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€33.00*

Similar products

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

y1004 Driveshaft boots for ball drive + dogbones
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

Average rating of 0 out of 5 stars

2012-289 Mecatech Right left threaded rod 45 mm
Genuine Mecatech spare/option part. Contents:1 piece

€12.15*

Average rating of 0 out of 5 stars

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution
Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

Average rating of 0 out of 5 stars

2012-274 Mecatech Car Bag
Genuine Mecatech spare/option part. Very tough car bag with hardcase shape. All side panels are reinforced with a solid plastic tub.Dimensions:Length: 93 cmHeight: 30 cmWidth: 45 cmContents:1 piece

€139.00*

Average rating of 0 out of 5 stars

2012-276 Mecatech Accessories bag
Genuine Mecatech spare/option part. Dimensions:Length: 66 cmHeight: 35 cmWidth: 35 cmContents:1 piece

€99.50*

Average rating of 0 out of 5 stars

2012/503 Steering servo linkage set dedicated to Mecatech FW01
Steering servo linkage set dedicated to Mecatech FW01Content:1213/11 Steering linkage l./r., M4 x 42 mm1 x 66244, Ball joint 7mm M4, 2 pcs.1 x 1213/10 Steel ball 7 x 6,5 mm, 2 St.2 x Screw M3 x 16 mm2 x Nut M3

€24.90*

Average rating of 0 out of 5 stars

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution
2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

Average rating of 0 out of 5 stars

2012-252 Mecatech Body mount Antiroll bar Blade right
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€29.50*

Average rating of 0 out of 5 stars

2012/501 Throttle linkage dedicated to Mecatech FW01 and FG Evolution
Throttle linkage dedicated to Mecatech FW01 and FG Evolution.Set includes:1 x 1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages1 x Screw M3 x 20 mm2 x Nut M3

€16.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Average rating of 0 out of 5 stars

2012-260 Mecatech Titanium Blade Antiroll Bar 3 mm
Genuine Mecatech spare/option part for the FW01.Contents:2 pieces

€67.00*

Customers also viewed

Average rating of 0 out of 5 stars

2012-40 Mecatech Front lower Wishbone LH
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€67.00*

Average rating of 0 out of 5 stars

2012-101 Mecatech Bell Clutch
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€50.00*

Average rating of 0 out of 5 stars

2012-112 Mecatech Pinion Z24
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Average rating of 0 out of 5 stars

6350 FG Fuel tube - 1pce.
Fits Zenoah Tank 7348ID 3 mm x L 470 mm

€9.70*

Average rating of 0 out of 5 stars

2012-88 Mecatech Carbon Fiber Side Guards
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€18.00*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 510 mm, Basic Kit -- Europe- and world champion
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Basic Kit of the FW01 is especially intended for "switchers" and differs from the chassis kit in terms of the brakes and shock absorbers (included in the chassis kit). Here is a list of the parts that are required for completion:brakes, shocks and springs (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the basic kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the engineDoes not include- Brakes, shocks and springs- differential- clutch- body and spoilers- Airbox- Engine and linkage- Electronics- Tires

€1,862.00*

Average rating of 0 out of 5 stars

2012-99 Mecatech Pinion Z35
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€33.00*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development