Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-197 Mecatech Rear weights

Product information "2012-197 Mecatech Rear weights"

Genuine Mecatech spare/option part for the FW01.

Attention:
does only fit the chassis plate with corresponding cut-outs and mounting provision!

Content:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6022/01 FG Flexible antenna with mount
Genuine FG spare/option part. FG antenna tube with mount.Tube measures:Inner diameter: 2,2 mmOutside diameter: 4 mmLength: 190 mmContents:1 piece

€7.50*

Average rating of 0 out of 5 stars

2012-97 Mecatech Pinion Z36
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€33.00*

Average rating of 0 out of 5 stars

2012-09 Mecatech Front Bumper Foam
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

Average rating of 0 out of 5 stars

2012-205 Mecatech Special brake disk
Genuine Mecatech spare/option part for the FW01.Suitable for the special carrier: 2012-202, 2012-203, 2012-204.Content:2 pieces

€28.20*

Average rating of 0 out of 5 stars

y1435 Connecting Spring for pipes
Genuine HT spare/option part. Dimensions:Lenght: approx 18 mmWire thickness: 0,8 mmContent:10 pieces

€7.90*

Average rating of 0 out of 5 stars

1000-59 Mecatech brake pads, steel 2,5 mm
Genuine Mecatech spare/option part. Suitable for the new Mecatech twin piston hydraulic brakes.Contents:4 pieces

€34.90*

Similar products

Average rating of 0 out of 5 stars

2012-185 Mecatech Ball for servo saver steering
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.50*

Average rating of 0 out of 5 stars

2012-209 Mecatech Spherical Joint holediameter 3 mm
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€10.10*

Average rating of 0 out of 5 stars

2012-205 Mecatech Special brake disk
Genuine Mecatech spare/option part for the FW01.Suitable for the special carrier: 2012-202, 2012-203, 2012-204.Content:2 pieces

€28.20*

Average rating of 0 out of 5 stars

2012-200 Mecatech Front upright ball joint Spacer -2 mm
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€15.60*

Average rating of 0 out of 5 stars

2012-201 Mecatech Front upright ball joint Spacer -4 mm
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€15.60*

Average rating of 0 out of 5 stars

2012-198 Mecatech Front upright ball joint Spacer 4 mm
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

Average rating of 0 out of 5 stars

2012-199 Mecatech Front upright ball joint Spacer standard
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€15.60*

Average rating of 0 out of 5 stars

2012-182 Mecatech Airbox Filter
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€9.20*

Average rating of 0 out of 5 stars

2012-183 Mecatech Retaining Plate for Bumper
Genuine Mecatech spare/option part for the FW01.Contents:1 pair

€16.50*

Average rating of 0 out of 5 stars

2012-208 Mecatech Servosaver rod M4/53 mm
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€12.90*

Average rating of 0 out of 5 stars

2012-202 Mecatech Brake UHB front standard 14 mm
Genuine Mecatech spare/option part for the FW01.With a special mount for the brake disk.Content:2 pieces

€55.70*

Average rating of 0 out of 5 stars

2012-204 Mecatech Brake HUB rear 11,5 mm
Genuine Mecatech spare/option part for the FW01.With a special mount for the brake disk.Content:2 pieces

€54.90*

Customers also viewed

Average rating of 0 out of 5 stars

5189 FG Porsche 911 GT3R body shell, Wheelbase 530 mm, painted
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 7020/17 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm

€299.95*

Average rating of 0 out of 5 stars

2021-01 Mecatech carburetor
Genuine Mecatech spare/option part. Mecatech Racing carburetor completely CNC machined no tolerances Increase in performance due to less restrictions in the air path, also fuel-saving no failures due to defects Contents:1 piece

€295.00*

Average rating of 0 out of 5 stars

2012-260 Mecatech Titanium Blade Antiroll Bar 3 mm
Genuine Mecatech spare/option part for the FW01.Contents:2 pieces

€67.00*

Average rating of 0 out of 5 stars

8300 Samba 8 Titan Racing - tuned pipe system DMC 10-1504
The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

Average rating of 0 out of 5 stars

y0733/061 Clutch spring green, 1.4 mm, 3 pcs.
Clutch spring green, 1.4 mm, optional part for BigScale Extreme clutch.

€9.90*

Average rating of 0 out of 5 stars

2012/503 Steering servo linkage set dedicated to Mecatech FW01
Steering servo linkage set dedicated to Mecatech FW01Content:1213/11 Steering linkage l./r., M4 x 42 mm1 x 66244, Ball joint 7mm M4, 2 pcs.1 x 1213/10 Steel ball 7 x 6,5 mm, 2 St.2 x Screw M3 x 16 mm2 x Nut M3

€24.90*

Average rating of 0 out of 5 stars

10008 FG Formula 1 Competition 1/5
This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency