2012-179 Mecatech Upright Kinping -3 mm LH

€56.50*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_179

EAN: 4058575148364

Product information "2012-179 Mecatech Upright Kinping -3 mm LH"

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

2012-177 Mecatech steering limiter

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€11.40*

Details

2012-172 Mecatech Retaining Brake line

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€6.00*

2012-175 Diff.ball bearing

Genuine Mecatech spare/option part for the FW01.Differential ball bearing, sealed on both sides.Content:1 piece

€9.75*

2012-166 Mecatech Carbon fiber pipe Support

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€26.00*

2012-163 Mecatech Drive shaft rubber pads

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€7.50*

Details

2012-170 Mecatech Servo Saver Spherical joint long

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

2012-155 Mecatech Protective Bellow

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€18.00*

2012-154 Mecatech Pinion Z 25

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.70*

Details

2012-153 Mecatech Differential Gearwell Z 73

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€54.00*

2012-149 Mecatech Countersunk Screws M5x18

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

2012-175/02LL Differential low-friction ball bearing 15/24/5, set of 2

Genuine Mecatech spare/option part for the FW01.Low-friction Differential ball bearing ABEC-7, sealed on both sidesContent:2 pieces

€15.90*

2012-175/02 Diff.ball bearing 15/24/5, set of 2

Genuine Mecatech spare/option part for the FW01.Differential ball bearing, sealed on both sidesContent:2 pieces

€13.90*

Customers also viewed

2012-201 Mecatech Front upright ball joint Spacer -4 mm

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€15.60*

Details

2012-185 Mecatech Ball for servo saver steering

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.50*

Details

2012-273 Mecatech Front upright, axled, high

Genuine Mecatech spare/option part for the FW01.Plus 4 mm upContents:1 piece

€57.40*

2012-178 Mecatech Upright Kinping -3 mm RH

€56.50*

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90*

2012-28 Mecatech Front Upright

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€56.50*

Details

Gas-nitrited tuning clutch bell for all cars to choose

For Model: y0723 - for FG, Smartech, Carson, Harm, RS5 und Co

Different versions to choose:y0723 Gas-nitrited tuning clutch bell for FG, Smartech / Carson, Harm, RS5 & Co..Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.y0726 Gas-nitrited tuning clutch bell for Losi 5ive-TGas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Scale-Cross clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.y0726/01 Gas-nitrited tuning clutch bell for Losi DBXLGas-nitrited tuning clutch bell with black oxide coating, machined from high grade. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well. This clutch bell is dimensionally identical to the stock part. Heat treatment and the use of a high grade material guarantee long service life.Due to a special heat treatment the clutch bell surface is shaded; this does not effect the function, but ensures great durability.y0729 Gas-nitrited tuning clutch bell for HPI Baja models, 1 pce.Gas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface whichguarantees dimensional stability even under high loads!Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Scale-Cross clutch.Suitable for slot drive HPI Baja pinions, both stock using a 4mm bolt and aftermarket ones for 5mm bolts. Comes with M4 and M5 bolts included.

€49.90*