Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-113 Mecatech Pillar Rear Axle LH

Product information "2012-113 Mecatech Pillar Rear Axle LH"

Genuine Mecatech spare/option part for the FW01.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

2012-254 Mecatech Titanium Blade Antiroll Bar 2,5 mm
Genuine Mecatech spare/option part for the FW01.Contents:2 pieces

€67.00*

Similar products

Average rating of 0 out of 5 stars

2012-106 Mecatech Aluminium Washer for Engine Fastening
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

Average rating of 0 out of 5 stars

2012-107 Mecatech Gearwells Retaining Ring
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

Average rating of 0 out of 5 stars

2012-108 Mecatech Zahnrad Z64
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

Average rating of 0 out of 5 stars

2012-105 Mecatech Countersunk Screw M5x12
Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-122 Mecatech Rear Driving Axle
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

Average rating of 0 out of 5 stars

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-112 Mecatech Pinion Z24
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Average rating of 0 out of 5 stars

2012-104 Mecatech Countersunk Screw M5x14
Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°
Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

Average rating of 0 out of 5 stars

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.
Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Average rating of 0 out of 5 stars

2012-116 Mecatech Rear Upper Whisbone
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€29.60*

Average rating of 0 out of 5 stars

2012-117 Mecatech Rear Upright LH
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€67.00*

Customers also viewed

Average rating of 0 out of 5 stars

2012-114 Mecatech Differential Bearing Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€46.00*

Average rating of 0 out of 5 stars

2012-212 Mecatech Grooves chassis FW01
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€290.50*

Average rating of 0 out of 5 stars

2012-232 Mecatech Alloy front Axle mount LH
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€86.00*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 510 mm, Performance Kit -- Europe- and world champion
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit:engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. We are currently waiting for the latest version of the Mecatech FW01.Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- TiresWe are currently waiting for the latest version of the Mecatech FW01.

€2,999.00*

Average rating of 0 out of 5 stars

8483/05 FG Alloy differential for 1:5 and 1:6
Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set

€139.99*

Average rating of 0 out of 5 stars

2012-103 Mecatech Engine Mounting Flange
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€57.50*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency