2012-108 Mecatech Zahnrad Z64

€61.00*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_108

EAN: 4058575030515

Product information "2012-108 Mecatech Zahnrad Z64"

Genuine Mecatech spare/option part for the FW01.

Content:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

2012-106 Mecatech Aluminium Washer for Engine Fastening

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

2012-107 Mecatech Gearwells Retaining Ring

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

2012-105 Mecatech Countersunk Screw M5x12

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-122 Mecatech Rear Driving Axle

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

Details

2012-104 Mecatech Countersunk Screw M5x14

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°

Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

2012-112 Mecatech Pinion Z24

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

2012-121 Mecatech Square Wheel Driver 11,5 mm

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.

Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Details

2012-120 Mecatech Spacer for Rear Upright Bearing

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

2012-110 Mecatech Bearing for Main Shaft

Genuine Mecatech spare/option part for the FW01.Low-friction Bearing for main shaft ABEC-7, sealed on booth sides.Content:1 piece

€9.20*

Customers also viewed

2012-103 Mecatech Engine Mounting Flange

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€57.50*

2012-101 Mecatech Bell Clutch

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€50.00*

Details

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set

Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

From €299.90*

Details

y1445 MadMax Maxi Pin tyre, 1 pair

MadMax MAXI PIN tyres have been specially developed for carpet race tracks! The special block tread pattern, with 480 knobs per tyre, provides excellent grip, but also puts extreme strain on the tyre and the rim. To stabilise the tyre, the outside of the tyre shoulder is equipped with vertical ribbing on the side, which minimises tilting under load and counteracts the shear forces that occur in bends. Furthermore, the MAXI PIN tyres have knobs positioned on the side of the outer side, which particularly support the steering behaviour of your RC car in bends. Taken together, the MAXI PIN tyres provide maximum grip. Dimensions: Outer diameter: 185 mm Tyre width at the outer edge of the tread: 75 mm 1 pair

€29.90*

2020-04 Mecatech Preload tool for Mecatech 2020 clutch

Genuine Mecatech spare/option part. Special Clutch Adjusting tool required to adjust the new 2020 Mecatech clutch.Contents:1 piece

€21.00*

6050 FG Plastic gear carrier 60 mm

Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*

y0501 mf-RaceLine cask shaped springs, blue 2,9 mm, 2 pcs.

The famous cask shaped spring by Markus Feldmann. Especially designed for front suspension applications.Fits all touring car shock absorbers with an outer diameter of 16 mm.Caution: Not suitable for MecaTech Klick shocks.Dimensions:Height: 47 mmCenter diameter (outside): 30 mmInner diameter (top/bottom): 17 mmCable thickness: 2,9 mm

€17.90*

Details