11801 Stabilizer mount front, 5 mm for FG Evo

€13.90*

Available

Product number: elc_11801

EAN: 4058575106722

Product information "11801 Stabilizer mount front, 5 mm for FG Evo"

Stainless steel stabilizer mount for FG EVO a-arms (except 2020 series!), complete with installation hardware.

M6 thread, for 5 mm stabilizer bar, one side with slotted hole for fine adjustment of the height.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

18801 Stabilizer mount rear, 4 mm for FG Evo

Stainless steel stabilizer mount for FG EVO a-arms (except 2020 series!), complete with installation hardware. M5 thread, for 4 mm stabilizer bar.Contents:2 pieces

€13.90*

1071/05 FG Stabilizer rod mount 4 mm rear, for Evo 2020

Genuine FG spare/option part. FG Stabilizer rod mount 4 mm rear, for Evo 2020Content:4 piece

€38.50*

1071/06 FG Ball guide 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2.Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1071/07 FG Ball socket 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

7102 FG Front wishbone pin - 2pcs.

6 x 87 mm

€9.90*

Pink-Racing Reinforced clutch spring y0134, 1 pce.

Reinforced spring for Zenoah OEM clutch with 2.7 mm wire diameter and five coils. Engagement speed is around 7500 rpm, which allows the engine to build up more power and torque for accelleration.Fits Zenoah, CY and most other engines in the 23 - 30 cc range with stock clutch.

€4.95*

Similar products

18801 Stabilizer mount rear, 4 mm for FG Evo

Stainless steel stabilizer mount for FG EVO a-arms (except 2020 series!), complete with installation hardware. M5 thread, for 4 mm stabilizer bar.Contents:2 pieces

€13.90*

15508, elcon Evo 04 XL a-arms, adjustment section r/h, 1 pce.

Fits the elcon Evo 04 XL a-arm main section.

€26.35*

50550/03 Brake pad (diff brake) Cleon, set

€10.85*

Elcon 18605 Carrier layshaft, 1 pce.

Item N° Elcon 18605 Carrier layshaft, 1 pce.Carrier for the layshaft.Fits all Elcon drive trains.

€42.50*

50505 Wishbone mount, Cleon

€17.80*

y0311 Elcon Aluminum front upper a-arms for FG Leopard 1

Aluminum front upper a-arms for FG Leopard 1 These parts will fit FG Leopard 1/ Leopard Race (built until approx. 2007) only! The machined aluminum a-arms feature plastic bushings for the hinge pins. They significantly increase torsional stiffness of the front suspension. Regular price: 69.90 EURSpecial offer: 49.90 EURContents:2 pieces

€49.90*

12453 Elcon ALU upper front wishbone Leopard until 2009

Suitable for FG Leopard Sportsline up to 2009.Length: 132mmWidth: 64mm

€24.90*

11403, elcon a-arm, touring car/GT, upper front - 1pce.

Upper a-arm, for M6 balljoints, adjustable camber, hardware included.

€39.95*

50550/06 Return spring (diff brake) Cleon

€1.25*

50132 Shaft for wing mount Cleon, 1 pce.

€9.50*

50415/11 Steering lever (slave) Cleon

€14.75*

50550/01 Holder (diff brake) Cleon

€28.25*

Customers also viewed

1071/05 FG Stabilizer rod mount 4 mm rear, for Evo 2020

Genuine FG spare/option part. FG Stabilizer rod mount 4 mm rear, for Evo 2020Content:4 piece

€38.50*

1057/01 FG Competition chassis plate, long EVO 09 - 530/535 mm, 1 pce.

The latest FG EVO alloy chassis with longitudinal grooves at the bottom. This reduces the contact patch of the chassis when touching the ground. The reduced tendency for rubber pickup results in lower loss of speed when the suspension bottoms out.Siince the overall length of the plate was reduced to 670 mm, is needed to install the rear body support. The chassis plate weighs 925 grams.Please note that the rear wing support from all previous EVO cars until 08 cannot be used with this chassis plate.

€324.95*

7102/05 FG Front wishbone pin hardened 6x87mm

Genuine FG spare/option part.Precision wishbone pin hardened and grounded, extremly solid. Not suitable for Formula 1. Suitable for all 1:5 models and Trucks for the front wishbone.Contents:2 pieces

€39.90*

2012-143 Mecatech Rear Shocks Mount Pin

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.90*

This product is currently not available.

7310 FG Gudgeon pin for Zenoah G230/240

Genuine FG spare/option part.Dimensions:Length: 26 mmDiameter: 8 mmContents:1 piece

€7.20*

1102/01 FG Front upper alloy wishbone adjustable für Evo 2020.1

Genuine FG spare/option part.for FG Evo 2020.1Wishbones are for left and right.Contents:1 piece

€41.90*

1071/06 FG Ball guide 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2.Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*