Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4487 FG Carbon stiffener front axle FG EVO 2020.2

Product information "4487 FG Carbon stiffener front axle FG EVO 2020.2"

Original FG spare part for Evo 2020.2. 1 piece.

1 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

4493/03 FG O-ring for servo saver
Genuine FG spare/option part. Spare part for 4493 and 4494. Thick: 3 mm.Contents:4 pieces

€3.90*

Average rating of 0 out of 5 stars

5013 FG Roll cage support left/right
Genuine FG spare/option part. A = 83 mm.Contents:2 pieces

€14.90*

Average rating of 0 out of 5 stars

5014 FG RC-plate for 1:5/Truck/Leopard
Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

4483 FG CFK-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€46.90*

Average rating of 0 out of 5 stars

4493 FG Alloy servo saver 04 complete
Genuine FG spare/option part.This servo saver is an improvement of the 04 version. The servo saver part A is now equipped with a flanged sleeve which prevents the servo saver spring from rubbing against the servo saver shaft.Suitable for all FG models.Contents:1 set

€62.95*

Average rating of 0 out of 5 stars

4478 FG Alloy riser plates for rear axle
Genuine FG spare/option part. The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only 4 countersunk screws to the chassis, which makes for a very fast change of the complete end.Replacement for plastic base plate FG 7068.Height 9 mmContent:2 pieces

€44.95*

Average rating of 0 out of 5 stars

4483/01 FG Alloy-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€34.99*

Average rating of 0 out of 5 stars

4493/06 FG O-ring for servo saver, 6x13x4 mm
Genuine FG spare/option part.Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3 mm. The use of these o-rings increases servo saver hardness. For use in combination with metal gear servos only! Dimensions:Inner diameter: 6 mm.Outer diameter: 13 mm.Material thickness: 4 mm.Contents:4 pieces

€4.30*

Average rating of 0 out of 5 stars

5010/02 Chassis for FG Sportsline 2WD-465 elektric Porsche GT2
1 pieces

€149.00*

Average rating of 0 out of 5 stars

4494/03 FG Ball bearing 7x14x5 mm
Genuine FG spare/option part. Contents:2 pieces

€3.90*

Average rating of 0 out of 5 stars

4493/32 FG Reinforced o-rings for FG servo saver, 3.5 mm
Genuine FG spare/option part. Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3.5 mm.Contents:4 pieces

€3.30*

Average rating of 0 out of 5 stars

5010/01 FG Alloy chassis Sportsline short wheelbase 465 mm
Genuine FG spare/option part. Replacement chassis for FG touring car EcoLine/SportsLine models with short wheel base 465 mm.4 mm alu-chassis. Contents:1 piece

€151.99*

Customers also viewed

Average rating of 0 out of 5 stars

8452/05 FG Rear tuning disk brake for 1:5 FG Evo Trucks and 1:6 Off-Road
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

Average rating of 0 out of 5 stars

4483 FG CFK-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€46.90*
%

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €179.90* €219.90* (18.19% saved)

Average rating of 0 out of 5 stars

8190 FG BMW M4 1/5 body shell for 530/535 mm Wheelbase with rear wing, clear
Genuine FG spare/option part. Fits on 2WD and 4WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Clear for 1/5 scale for 530/535 mm wheelbase. With rear wing.Required body mounts:Mount front: FG 7020/15 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8014 Body mounts Side body mount rear: FG 9014/01 Body mounts Contents:1 piece

€269.90*

Average rating of 0 out of 5 stars

FG Stadium Marder 2WD
Now, the legendary 1:6 FG Marder 2WD off-road buggy with Stadium tyres!  Looks great and offers better handling characteristics. Thanks to the stadium tyres, the Marder is almost 100 mm wider and therefore much higher cornering speeds are possible. These tyres can also be driven on asphalt. Dimensions of the stadium wheels: Diameter 170 mm Width 90 mm Mounting square 18 mm For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas.A 800 cc tank gives almost an hour of driving fun!For the FG Stadium Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun!The FG Stadium Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu.RTR-equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-batteryFeatures:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions:Length: 710 mmWidth: 510 mmHeight: 270 mmWheelbase: 475 mmDrive:2WDMotorization:GasRTR:RTR to chooseScale:1/6

€799.95*

Average rating of 0 out of 5 stars

4481 FG Carbon fiber rear reinforcement plate
Genuine FG spare/option part. By mounting the carbon fiber reinforcement deformation of the rear plastic damper plate can be minimized. Recommended at higher ambient temperatures.Suitable for all FG models except Evo and Formel 1.Contents:1 piece

€53.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency