10644 FG Alloy wishbone mounts M4

€35.10*

Available

Product number: fg_10644

EAN: 3410564527658

Product information "10644 FG Alloy wishbone mounts M4"

Genuine FG spare/option part.

Solid alloy wishbone mounts with M4 thread for the FG Formula 1 Sportsline and Competition models.

Six pieces per car are required.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

10661, FG Turnbuckles, M6 x 50

Genuine FG spare/option part.Contents:2 pieces

€15.90*

10656 FG Intermediate shaft for spur gear 38T

Genuine FG spare/option part.Contents:1 piece

€17.40*

10654 FG Alloy engine mount - 1 pce.

€14.60*

10655 Spur gear 38 teeth

Genuine FG spare/option part.Contents:1 piece

€76.90*

10652 FG Layshaft for Gear drive - 1 pcs

Diameter 10 mmLength 84.4 mm

€50.50*

10631, FG F1 rear lower alloy wishbone 09, 1 pce.

Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.

€98.95*

10632, FG F1 front lower alloy wishbone 09

Genuine FG spare/option part.Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.Contents:1 piece

€98.95*

10666 FG inlet silencer for F1 + Evo 08, set

Genuine FG spare/option part.The inlet silencer developed especially for the Formula 1 models to fit the CY / Zenoah G230/240/260/270 engines. The standard version of this air filter is equipped with a foam filter insert. Standard equipment of the F1 Competition. For a higher dust arising the special conical filter insert should be mounted.

€71.50*

10631/20, FG F1 rear lower alloy wishbone 09 with rose joints, 1 pce.

Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.Complete with installation set with three top quality rose joints and six conical spacers, a value of 30.75 EUR.

€107.00*

10643 FG Alloy differential bearing carrier, r/h - 1 pce

Spare part for F1 gear drive

€39.90*

10641 FG Alloy rear bulkhead r/h F1 Comp. - 1 pce

Spare part for F1 gear drive

€106.50*

10650 FG Alloy layshaft bearing mount - 1 pce

Spare part for F1 gear drive

€25.90*

Customers also viewed

10644/01 FG Alloy wishbone mounts Ø4

Genuine FG spare/option part. Solid alloy wishbone mounts with 4mm boring for the FG Formula 1 Sportsline and Competition models.Six pieces per car are required.Contents:2 pieces

€35.10*

10430 FG Upper/lower alloy wishbone left for F1 - 1pce.

Manufactured in high-strength alloy. Free from play, twisting-firm with exchangeable ball-type nipple. For mounting the wishbone threaded rods , , , or are needed as well as one ball-type nippe each wishbone.

€49.90*

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

y68412 Front upper alloy wishbones 4WD

Genuine HT spare/option part. Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster-/ Stadium- Modelle 4WD RTR, 4WD Porsche and Mini. Set included:2 x Front upper alloy wishbones2 x Aluminum balljointsBushingsScrewsTaper disksContents:1 set

€119.90*

67370 FG Alum.double servo saver 4WD, 1 set

The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.

€157.50*