10344 FG Shock absorber fastening brace rear for F1 Competition - 1pce.

€21.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_10344

EAN: 3410564526293

Product information "10344 FG Shock absorber fastening brace rear for F1 Competition - 1pce."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

10702 FG Engine mount Formular 1 electric

Genuine FG spare/option part. Contents:1 piece

€62.95*

10703 FG Reducing Bush E

Genuine FG spare/option part. Contents:1 piece

€12.90*

10064 FG Belt tensioner - 2pcs.

Fits formula 1 cars only.

€11.90*

10363 FG Rear pushrod lever, ball raced for F1 Competition

Genuine FG spare/option part. Rear pushrod lever system for FG F1 Competition chassis. Ball raced damper levers with M5 mounting bolts. Increased shock piston travel.The set includes all parts necessary for the conversion.Contents:1 set

€143.95*

10480 FG Stabilizer F1 front/rear

Genuine FG spare/option part.Continously adjustable stabilizer for front and rear axle. Suitable for Formula 1 Sportsline chassis.Contents:1 set

€59.90*

68408 FG Front axle free wheel for 4WD

Genuine FG spare/option part. The advantage of a one-way clutch over conventional or limited slip differentials is the combination of maximum propulsion and outstanding agility in the turns. This results in a 4WD vehicle with the quick turning-in of a 2WD while retaining the advantages of 4WD traction when accelerating out of corners.This applies to offroad and street cars alike.The inner races in the one-way clutch feature the internal spline drive to accept FG differential shafts. They are made of high strength steel, hardened and ground to very close tolerances. Combined with the large one-way clutches, this guarantees the transfer of the high maximum torque.Installation is pretty easy; the one-way clutch unit replaces the bevel gears in the diff including the satellite gear shaft and is inserted as a single piece into the differential case. You just have to take care that the side where the writing on the clutch can be seen goes to the left hand side (in the direction of travel).Fits FG-plastic differential case and HT- or FG-aluminum cases for non-self-locking differential versions.For vehicles not equipped with in-wheel brakes it should be noted that there will be no more braking action in front from the layshaft brake when running the one-way clutch as a front differentialOnly for 4WD models. Suitable for all differential housings except viscous and Powerlock diff.Contents:1 piece

€143.50*

Similar products

10259 FG Body detail kit F1

Genuine FG spare/option part.Contents:1 set

€13.90*

10265/03 FG Mount for front spoiler - 2pcs.

Set not included mounting parts. Replacement part for Frontspoiler No. 10265

€9.20*

10269 FG Team decals Buzzin-Hornets Formula 1

Genuine FG spare/option part.Measures:475 x 360 mm475 x 320 mm345 x 160 mm

€28.80*

Details

10330 FG Front axle carrier left for F1 Competition

Genuine FG spare/option part. Contents:1 piece

€178.50*

Details

10430 FG Upper/lower alloy wishbone left for F1 - 1pce.

Manufactured in high-strength alloy. Free from play, twisting-firm with exchangeable ball-type nipple. For mounting the wishbone threaded rods , , , or are needed as well as one ball-type nippe each wishbone.

€49.90*

10411 FG Ball bearing set for F1

fg_10411 Version: 10411SL Sportsline, sealed

Genuine FG spare/option part. Suitable for Formula 1. The set contains all ball bearing which are necessary for one model.Contents:10411SL Sportsline:10411CO Competition:2x 8x16x6 mm4x 10x19x7 mm8x 8x22x72x 12x28x8 mm3x 8x16x5 mm4x 10x19x7 mm8x 8x22x7 mm2x 15x28x7 mm

€43.90*

10331 FG Front axle carrier right for F1 Competition - 1pce.

€178.50*

10353 FG Front pushrod lever, ball raced for F1 Competition

Genuine FG spare/option part.New designed front pushrod lever system for FG F1 Competition chassis. Ball raced damper levers with M5 mounting bolts. Increased shock piston travel. The set includes all parts necessary for the conversion.Contents:1 set

€143.95*

Details

10401 FG Steel manifold for tuned pipe F1 - 1pce.

Very strong steel manifold, for use with Formula 1 Sportsline tuned pipe and tuning pipe 10400 only.

€68.20*

10431 FG Upper/lower alloy wishbone right for F1 - 1pce.

€49.90*

10363 FG Rear pushrod lever, ball raced for F1 Competition

€143.95*

10267 FG Team decals HP-Castrol Formula 1

Sheet dimensions:470 x 370 mm410 x 255 mm

€28.80*

Customers also viewed

y0686 Rapido the gas station for 1/5 and 1/6 cars

6 litre gas can with thumb activated filler valve.With Rapido filling up is quicker, simpler and more convenient than ever! Thanks to the dosing button you can control the flow of fuel precisely.Unlock by folding out!Press the button and keep control of filling!Lock by folding in again. Finished!No spills, no awkward handling, all clean and easy Other:Half round spout for ventilation and visibility suitable also for the smallest tank openingsLarge opening for easy fillingFlow controlled by press-buttonVentilation allows full flowSturdy design with two handlesTransparent 6 litre container with litre indication in the filling and rest positionsContents:1 piece

€59.90*

66225 FG Alloy a-arm, rear upper 4WD

Genuine FG spare/option part.Contents:1 piece

€25.90*

FG Sportsline 2WD-465 with Porsche GT2 body shell, 23cm³ Engine

The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm Touring cars in action!Painting tips:

From €1,159.95*

Configure now