1000-53 Mecatech brake fluid, 50 ml

€8.90*

Prices incl. VAT plus shipping costs

Available

Product number: mec_1000_53

EAN: 4058575109693

Product information "1000-53 Mecatech brake fluid, 50 ml"

Genuine Mecatech spare/option part.

Replacement part for Mecatech twin piston hydraulic brake.

Contents:

1 piece / 50 ml

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y1000-53 Mecatech brake fluid, 50 ml

Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

Customers also bought

9452/02 FG Filling and ventilation set

Genuine FG spare/option part. Spare part 9440.

€4.70*

1000-54 Mecatech brake line, 1 m

Genuine Mecatech spare/option part. Dimensions:Inner diameter: 2 mmOuter diameter: 4 mmContents:1 piece

€4.00*

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C

7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90*

Configure now

1000-14 Mecatech 90° fitting, 1 pce.

€12.80*

P-R-M 1000-40/02 Epoxy brake disk, slotted, for Mecatech

PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces

€19.90*

1000-04 Mecatech dust seal, 2 pcs.

Replacement part for Mecatech twin piston hydraulic brake.

€4.90*

Customers also viewed

y1000-53 Mecatech brake fluid, 50 ml

Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

y1045 hydraulic brake lining 4mm - 1 St

hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm

€4.90*

8450/05 FG Front tuning disk brake for nearly all FG-models

Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining

€169.95*

y1421 Engine quick mount for G320 Zenoah in FG 1/5 scale

y1421 Versiown: y1421/01 for all Zenoah and Chung Yang engines up to 30 cm³

Genuine HT spare/option part. The engine quick mount replaces the standard clutch housing. It allows a much faster installation or removal of the engine since the clutch side of the engine is only be clamped by one single screw. The gear plate remains in the vehicle, the motor flange on the engine.The engine quick mount fits all FG 2WD on-road cars with horizontal engine (except Formula 1) Sportsline, Competition and Evo (EVO model range till 2003, except Evo 2020 series).We are sorry, but due to the design the quick mount cannot be used for FG 1/6 off-road and monster cars.For the first time it is now possible to install the Zenoah G320 in these cars! For cars allready equipped with a FG quick mount only the engine flange y1423/02 is required.The quick mount is available in two versions:y1421/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1421/02 for Zenoah G320When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1421/01 does not fit in combination with Zenoah OEM clutch!

€74.95*

1000-64 Mecatech DOT-4 brake fluid 50ml

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50ml

Content: 50 Milliliter (€218.00* / 1000 Milliliter)

€10.90*

9541 FG Hydraulic brake for front axle

Genuine FG spare/option part. Content:1 set

€384.95*

1000-36 Mecatech o-ring, 4 pcs.

€6.00*