y1416/00 GPM Ultragrip on MadMax rims for Losi, HPI, Carson and Co. (24 mm hexagon wheel drive) 1 pairs

This fully pre-assembled 1:18 scale model with four-wheel drive and two differentials is equipped with a brushless motor.  Up to 18 minutes of driving fun on a single battery charge.  Up to 40 km/h top speed.  Thanks to its robust chassis, proven design, hydraulic shock absorbers and versatile tyres for different surfaces, the Pirate Monster-T can easily drive at high speeds.  • Ventilated chassis to protect the RC equipment, motor and gearbox.  • Independent 4-wheel suspension and double wishbones.  • 4x4 drive with central metal cardan shaft.  • Four hydraulic shock absorbers.  • Rollover protection wheels.  • Powerful brushless motor.  • Front and rear bumpers.  • Speed controller (30–100%). • LEDs.  • Metal differential gear at the front and rear.  • Versatile multi-purpose tyres.  • 2.4 GHz radio remote control with ergonomic transmitter with joystick/trigger. Model dimensions:  • Length: 210 mm  • Width: 175 mm  • Height: 95 mm  • Weight: 495 g  • Wheelbase: 175 mm Additional information: • 7.4V 1050mAh Li-Po battery pack and USB charger included. • Requires 2 x 1.5V AA batteries for the transmitter, not included. • Recommended minimum age: 14 years.1 Set

BIG DIGGER 170x60 with black HPI rims, 20-fold bolted, with 24 mm hexagonal mount and reinforced orange rim rings for Losi, HPI, Carson and many more.  Due to the extreme stress caused by the MadMax BIG DIGGER tyres, the rim has been further optimised with a reinforcement ring.  The MadMax tyres have 84 extremely strong lugs, each measuring more than 1 cm² and 6 mm high, which enable optimum power transmission and provide excellent grip even on loose surfaces such as sand and earth.  The tyres are equipped with a special rigid tyre insert that transfers the applied force without tilting, even on heavier models.  We recommend checking the screw connections on the rims after use.  Dimensions: Outer diameter: 170 mm Tyre width: 60 mm Reinforced 26 mm hexagonal rim mount 1 pair 

Product Safety  DangerCauses skin irritation.Contains (R)-P-MENTHA-1,8-DIENE. May produce an allergic reaction.Contains Geranyl acetate. May produce an allergic reaction.Contains NERYL ACETATE. May produce an allergic reaction.Contains citral. May produce an allergic reaction.Contains linalool. May produce an allergic reaction.Extremely flammable aerosol.May cause drowsiness or dizziness.Pressurised container: May burst if heated.Toxic to aquatic life with long lasting effects.Genuine HPI spare/option part. The Dirt Buster front Rib tyre in M Compound is the ideal match for the Block rear tyres. With multiple rows of ribs ably guiding the tyres, you are able to control the Baja 5B in nearly any off-road situation and on nearly any surface! Side grip is enhanced by the 'dash' ribs, allowing the tyres to grip surfaces like mud and grass. The solid ribs grip harder surfaces like hardpacked dirt and clay, and also work great on very loose surfaces like sand. This is the perfect off-road tyre for the Baja!Content:2 pieces / 1 pair

Front tiresUltragrip  170x60 on black HPI rims with 20 beadlock screws, with 18 mm square socket and reinforced orange headlock rings for FG, Smartech and many more.150 shifted long lugs and a central, 4 mm high ridge on the 60 mm wide front tire.The flattened profile structure of the rows of knobs reduces the directional control and guarantees an exceptionally good on-center feel!This makes the car less prone to unwanted traction rolls!Due to the extreme load created by the GPM Ultragrip tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars.The GPM Ultragrip are designed for use on sandy surfaces.We recommend to check the beadlock screws after the run.Dimensions:Outer diameter: 170 mmFront tire width: 60 mmReinforced 24 mm hexagon wheel driveRear tiresBIG DIGGER 170x60 with black HPI rims, 20-fold bolted, with 24 mm hexagonal mount and reinforced orange rim rings for Losi, HPI, Carson and many more. Due to the extreme stress caused by the MadMax BIG DIGGER tyres, the rim has been further optimised with a reinforcement ring.  The MadMax tyres have 84 extremely strong lugs, each measuring more than 1 cm² and 6 mm high, which enable optimum power transmission and provide excellent grip even on loose surfaces such as sand and earth.  The tyres are equipped with a special rigid tyre insert that transfers the applied force without tilting, even on heavier models. We recommend checking the screw connections on the rims after use. Dimensions: Outer diameter: 170 mm Tyre width: 60 mm Reinforced 26 mm hexagonal rim mount - 2 pairs

Genuine HPI spare/option part. Contents:2 pieces

Item N° 6406/05 Off-Road tires Killer Soft glued - 2pcs.The Killer tires are glued on genuine 1/6 scale FG buggy rims with extension ring! Suitable for all 1:6 Off-Road models, Monster and Stadium Trucks. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.This Killer tire is distinguished through a lot of grip and a long durability. Diameter x width: 165 x 65 mm Rim with 18 mm square drive

SUPER GRIP Soft tires 170 x 60 mm with black MadMax Extreme rims for 18 mm square wheel drive, 20 beadlock screws per rim and orange reinforced beadlock rings. Fits FG, Smartech and many more models.Due to the extreme stress created by the MadMax SUPER GRIP tires, the rim has been optimized again.The tires come with a special rigid insert which transfers the applied forces without tilting; even with the heaviest cars like the Losi 5ive-T.All together, the SUPER GRIP lives up to its name and provides maximum grip, which makes it necessary to use the supplied 3 mm beadlock screws for the MadMax EXTREME rims instead of the usual 2.5 mm screws. Additionally, the seating of these screws should be checked after each use.The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video.) On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T Mini should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the Mini body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.MadMax SUPERGRIP tires are available in the following compounds: (embossed marking on the inside shoulder!)Breite:Soft:Medium:60 mm y1464/01y1464/0280 mm y1464/03y1464/04For running an rc-car on tarmac, the following recommendations apply:The dirtier the track or the colder the weather, the stickier (softer) the rear tires should be.A note for the front tires: 2WD cars should run slightly harder tires in front than in rear.On 4WD cars the same compound front and rear is usually a good choice!Of course, like in full scale motorsport it also applies to the MadMax SUPER GRIP tires that the softer the tire the higher the wear. The medium compound tire lasts significantly longer than the soft version!MadMax SUPERGRIP spare rubber can be found here: MadMax SUPER GRIP spare part Some off-road tires knowledge can be found here!