Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y1104 Maintenance tray for 1/5 cars

Product information "y1104 Maintenance tray for 1/5 cars"

Genuine HT spare/option part.

Maintenance tray for all 1/5 scale RC car models. The tray with its rubber pad prevents the car from sliding while working on the vehicle at the race or in the basement.

Dimensions:
  • Length: 370 mm
  • Height: 60 mm
  • Width: 170 mm


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y19302/02 Piston Blocker for almost all engines
Genuine HT spare/option part. Helpful tool for removal of clutch shoes, flywheels and many more.FitsZenoah G230/G240/G260/G270/G290/G320Chung-Yang enginesPT enginesLosi enginesHPI enginesThreadsize:M10 x 1Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*

Average rating of 0 out of 5 stars

y7343/08 Champion Spark plug for Zenoah/CY and other
Genuine Champion spare/option part.The Champion spark plug means higher speed range, longer time of exposure andimproved starting function. Thread size M10 x 1 fits CY / Fuelie / PT / Zenoah G230/240/260/270/290 and otherSerienkerze vom Zenoah G230/240/260/270.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

6558 FG Y-cable Futaba
The Y-cable is required to drive two servos from a single receiver channel.Content:1 piece

€11.10*

Average rating of 0 out of 5 stars

Servosaver Blocker - y1039
Servosaver blocking pin to block the servosaver in a middle position for a accurately setup of the front suspension.Fits on FG EVO Touring Cars 06, 07, 08 and Competition 07.

€11.90*

Similar products

%

Average rating of 0 out of 5 stars

TT1030 Top Tuning CAR-STAND for 1/5, 1/6, 1/8, 1/10
Ideal work stand with extra wide tripod up to 100 kg. load capacity with excellent stability, even on uneven (!) urface.Specially made support mechanism, individually adjustable width from 115 mm to 375 mm for most RC cars from 1/10 to 1/5 scale. incline from 0 to 90° Quickly folded and loaded For easy storage, as well as for transport completely foldable! (Carrying bag available!)Height adjustment of the support from 635 mm to 1000 mm and inclination from 0-90° Length of the support surface 386 mm Bis zu 100Kg belastbar! Support mechanism continuosly adjustable in width Due to various adjustment options, the Top Tuning CAR STAND offers the optimal possibilities for making adjustments or maintenance work on the RC car. The load capacity and stability are beyond doubt with a load limit of 100 kg and the extremely stable tripod. The up to 90 ° adjustable slant shows your RC car at events and presentations, as well as in your assembly room to its best advantage! 6.5 kg. weight Pivoting bracket Height adjustable from 69 to 104 cm Basic frame is made of steel, painted or chromed Car bracket is made of aluminum and stainless steel A tool holder TT1030/01 is also available as an accessory in our shop selection.

€179.90* €199.99* (10.05% saved)

Average rating of 0 out of 5 stars

y0720 rc-car-online Transmitter bag
Genuine HT spare/option part. Extremely sturdy, fully padded transmitter bag! Fits all popular pistol grip transmitters Top quality; with padded adjustable length retaining straps to secure the transmitter, large zippered flap and adjustable carrying strap. Dimensions: Width: 23 cmHeight: 34 cmDepth: 17 cmContents:1 piece

€24.90*

Average rating of 0 out of 5 stars

y0518 Hobbythek service bag
Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€7.90*

Average rating of 0 out of 5 stars

y0615 HT Yellow safety vests for driver and helper
Genuine HT spare/option part. High visibility bright yellow safety vests for drivers and assistants, highly recommended for racing and training tracks. It should be kept in mind that large scale 1/5 or 1/6 cars weigh more than 10 kg and can be very fast! On most tracks safety vests are required specifically for volunteers. Note: The carriage of a safety vest in the real car is compulsory in almost every country of the EU! These vests were specifically manufactured for the rc-car sport and carry the print "Race Track Marshal" on the back; they also meet the safety standards for the automotive sector.

€9.90*

Average rating of 0 out of 5 stars

y1104/01 Foldable maintenance tray for 1/5 and 1/6 cars
Genuine HT spare/option part. Foldable maintenance tray, ideal for 1/5 and 1/6 cars; even for heavy weight and high ground clearence cars like a Losi 5ive-T!Size folded:Width: 300 mmHeight: 315 mmDepth: 40 mmWeight 1 kgSize erected: Width: 300 mmHeight: 220 mmDepth: 210 mmContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

6646 FG Protective cover for 1:5 touring car, 1 piece
A protective cover for large 1:5 touring car models, black with FG logo. 1 piece

€39.90*

Average rating of 0 out of 5 stars

y0715 rc-car-online High tech mechanics gloves, nitrile, black
Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

€8.90*

Average rating of 0 out of 5 stars

TW-05 Mecatech cloth face mask, unisex
mec_tw_05 Version: for Woman
Genuine Mecatech spare/option part. Contents:1 piece

€22.50*

Average rating of 0 out of 5 stars

y0684 rc-car-online.de banner 80 x 300 cm
rc-car-online.de banner, made from tough UV and weather resistant PVC tarpaulin; black print on yellow background with reinforced edges and stainless steel eyelets. The rc-car-online.de banner is at home on all race or practice tracks, just where large scale car drivers meet for fun or competition. Yellow and black are not only the colors of our local ice hockey club (Krefeld Penguins) and of one Germanys most successful soccer clubs. But on this same banner, provided with our mini-car logo and the rc-car-online.de lettering the colors are present on race tracks all around the world as a sponsor for the German, European, and World Championships. Size 80 x 300 cm We sell the banner at cost price! b>

€34.90*

Average rating of 0 out of 5 stars

y0682 High tech mechanics gloves, nitrile, black, 2 pcs.
Glove Size: size 10 / approx 27 cm
y0682High tech mechanics gloves, nitrile, black, 2 pcs.With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 9 and 10 glove size? u> b>Measure the circumference of your hand without the thumb and at the widest point (above the ankle).The tape measure should embrace the hand loosely.- Size 9 = 24 cm circumference- Size 10 = 27 cm circumferenceNorm EN388Lining 100% polyamidePackage contents: 1 pair / 2 pieces- partially coated with hightech nitrile - fits like a second skin- grips even when wet- good touch sensitivity- liquid-repellent- good resistance against oil and grease

€8.90*

Average rating of 0 out of 5 stars

y0685 Zenoah banner
Digitally printed banner sheet with four eyelets for mounting. Edges are hemmed and double stitched for increased strength.Size:Width: 180 cmHeight: 100 cm

€39.90*

Average rating of 0 out of 5 stars

y0780 RC-Car Comfort relax chair / camp-chair
Extremely rugged steel construction with comfortable, one piece seat and back rest Premium version made of coated 22 mm diameter steel tube, with horizontal folding mechanism and black, back-supporting and tear-resistant high quality upholstery fabric. Back rest with printed RC-Car logo on both sides. Padded black fabric armrests.Unfortunately, due to the folding mechanism and the bulky storage of these chairs, some scratches on the steel pipe are inevitable! Dimensions, folded: Length: 80 cmWidth: 50 cmHeight: 7 cm Dimensions set up:Total height: 80 cmSeat height 47 cm Seat:Width: 50 cmDeep: 40 cmWeight: 4.4 kg

€39.90*

Customers also viewed

Average rating of 0 out of 5 stars

y1622 Multifunctional assembly stand
Robust quality, extremely stable (capable of carrying more than 30 kg), universally usable, multicolored, support surface can be opened, below 1 large compartment, as well as 1 removable insert approx. 36 x 16 cm with 2 yellow drawers below the support, divided into 5 or 7 compartments for small items 6 or 7 side insertion holes in different sizes for screwdrivers etc.Dimensions:approx. 50 x 32 x 32 cm

€39.90*

Average rating of 0 out of 5 stars

y1104/01 Foldable maintenance tray for 1/5 and 1/6 cars
Genuine HT spare/option part. Foldable maintenance tray, ideal for 1/5 and 1/6 cars; even for heavy weight and high ground clearence cars like a Losi 5ive-T!Size folded:Width: 300 mmHeight: 315 mmDepth: 40 mmWeight 1 kgSize erected: Width: 300 mmHeight: 220 mmDepth: 210 mmContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

y0695 HT Tool bag
Tools and decorative items are for presentation purpose only and not included. Genuine HT spare/option part. Tool bag, extremely rugged tool bag made from reinforced fabric, sewn edge. With 41 flexible attachment loops for various tools with all-round zipper and reinforced handle.Dimensions:Width: 510 mm Height: 275 mmContents:1 piece

€22.90*

Average rating of 0 out of 5 stars

9505 FG Evo 2020.2 Race Kit 2WD-530
Competition-OnRoad RC car with the latest technical developments. Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content Top suspension with 10 mm T7075 aluminum chassis plate Zenoah G230RC Engine Adjustable Tuning Clutch Air filter / Airbox Tuned pipe system Front and rear hydraulic brakes Differential Large volume shock absorbers, black anodized Wheels and rims

€3,499.95*

Average rating of 0 out of 5 stars

6646 FG Protective cover for 1:5 touring car, 1 piece
A protective cover for large 1:5 touring car models, black with FG logo. 1 piece

€39.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development