Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Product information "y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml"

018c485528427120ba596f9eb161bc98.jpg

Dry lubricant instead of oil



We did not think that today its still possible to make a real improvement in lubricants!

DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.
The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.

What is DryFluid Extreme RC-Cars?

DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.

DryFluid Extreme product features
  • Reduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated components
  • Lowest friction for smooth operation and wear reduction
  • Multistage lubricant system with immediate and long-term lubrication effects
  • Does not bind any dust or dirt
  • Extremely good penetrating ability
  • Highest compatibility with all common materials like metals, plastics and rubber
  • Excellent adhesion and corrosion protection properties


The use of DryFluid Extreme RC-Cars

The main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.
For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.
Before use, shake bottle vigorously for a short time!

Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly.

Shake well before use

Attention:
Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y1303/21 EC5 Short circuit connector
Genuine HT spare/option part.Allows the use of a single 4S or 6S battery in a Losi Super Baja Rey / Rock Rey.Content:1 piece

€6.90*

Average rating of 0 out of 5 stars

y1564/17 No-wire adapter EC8 male to EC5 connector female
Genuine HT spare/option part.Space-saving no-wire adapter, just 61 mm long.Contents:1 piece

€12.90*

Average rating of 0 out of 5 stars

7087/02 FG Lower shock retaining long - 2pcs.
Spare part for , , , , , , , , and .

€4.70*

Average rating of 0 out of 5 stars

7087/01 FG Lower shock retaining short - 2pcs.
Spare part for , , and .

€4.50*

Average rating of 0 out of 5 stars

6096 FG Shock retaining screw M5
Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*

Customers also viewed

Average rating of 0 out of 5 stars

DYNE4105 Small Block 2-Cycle Pre-Mix oil, 250 ml
Genuine Dynamite spare/option part. Contents:1 piece / 250ml

Content: 250 Milliliter (€79.96* / 1000 Milliliter)

€19.99*
%

Average rating of 0 out of 5 stars

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars
Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€44.90* €59.90* (25.04% saved)

Average rating of 0 out of 5 stars

y0113/02 Thread locking compound, high strength
kleb_0005 Strength: y0113/02 High+ 2EUR
Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 20 Gramm (€495.00* / 1000 Gramm)

Variants from €7.90*
€9.90*
%

Average rating of 0 out of 5 stars

y0744 Differential Silicone oil / grease, viscosity 15.000 untill 2.000.000, 50 ml
For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€298.00* / 1000 Milliliter)

From €14.90* €17.90* (16.76% saved)

Average rating of 0 out of 5 stars

2012-175 Diff.ball bearing
Genuine Mecatech spare/option part for the FW01.Differential ball bearing, sealed on both sides.Content:1 piece

€9.75*

Average rating of 0 out of 5 stars

y0809 Klüber high performance grease for differentials
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

Average rating of 0 out of 5 stars

WD-40 Smart Straw Multi function oil
With the integrated spray head can be changed between large-scale and precise spraying. The tube remains firmly at the spray head and is therefore no longer lost in the application. For surface spraying, the spray tube is simply folded down. With unfolded spray tube you can reach small spaces and can apply the product exactly accurately. Due to the 360 ​​° valve, the can can be maintained upright or overhead, so every application is possible.Protects against corrosion:Thanks to its corrosion-resistant formula, it offers long-lasting protection against rust and all forms of oxidation on metal surfaces.Temperature range: -50 to +150° C Eliminates squealEines der Hauptkomponenten ist ein aktives Schmiermittel, welches die Gängigkeit beweglicher Teile erleichtert und gleichzeitig Quietschen und Knarren beseitigt. Darüber hinaus schmiert es Teile und Mechanismen. Displaces moistureThe WD-40 multifunction product forms a perfect barrier against moisture by adding it. Thus, electrical and electronic mechanisms are always protected and creep currents are avoided. Cleans and protectsSolves stubborn dirt, oil, fat and adhesive residue and lets you easily remove. Leaves a nourishing protective layer. Loosens rusted partsLoosens stuck mechanics and jammed metal parts by infiltrating rust layers to loosen them. WD-40® multifunction product infiltrates and loosens rusted and fixed screws. It penetrates in hinges into the thread and protects against corrosion. WD-40® multifunction product displaces moisture, lubricating and eliminating squeaking. >PRODUCT PERFORMANCE AND FEATURES: Eliminates squeaks Undercuts moisture, resin, tar and dirt Cleans and protects against corrosion Loosens rusted parts Loosens stuck mechanics, rusted bolts and nuts Removes dirt and lubricates all types of tools Silicone, resin and PTFE free >MATERIAL COMPATIBILITY: GENERAL: Virtually all materials react to WD-40® Multifunction Product in the same way as they do to other high-quality aliphatic solution benzenes under the same conditions of exposure, such as spraying, short or even prolonged immersion. WD-40® multifunction product does not contain silicone, PTFE or chlorofluorocarbons. RUBBER: No visible effects on the surface of various types of rubber that have been sprayed with WD-40® Multifunction Product. Certain types of rubber swell when immersed in WD-40® Multifunction Product for extended periods of time. STRENGTHENED STEEL (for hydrogen embrittlement): Rated SAFE according to the Lawrence Hydrogen Effusion Test. FABRIC:WD-40® multi-function product causes no visible effect except slight discoloration that can be easily removed with naphtha or dry cleaning solvent (Tested: Nylon, Orlon, Wool, Dralon, Cotton). PAINTED SURFACES: Many types of paint on various surfaces have been exposed to WD-40® Multifunction Product without observing an effect. Wax polishes and certain wax coatings may be softened by WD-40® Multifunction Product. PLASTICS: Die folgenden Kunststoffe wurden 168 Stunden lang in WD-40® Multifunktionsprodukt eingetaucht ohne sichtbaren Effekt: The following plastics have been immersed in WD-40® Multifunction Product for 168 hours with no visible effect: polyethylene - Formica - epoxy - Delrin - polypropylene - acrylic - vinyl - polyester - nylon. Clear polycarbonate and polystyrene may develop hairline cracks or larger cracks when in contact with WD-40® multifunction product. > APPLICATION: Shake well before use. Hold can upright, tilted or upside down when spraying. IMPORTANT: Disconnect power from power tools, equipment and other live parts before spraying.

Content: 200 Milliliter (€39.90* / 1000 Milliliter)

€7.98*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Plugin Development