6096 FG Shock retaining screw M5

€11.90*

Available

Product number: fg_6096

EAN: 3410564506158

Product information "6096 FG Shock retaining screw M5"

Genuine FG spare/option part.

Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.

Part is delivered in silver or black color from vendor!

Dimensions:

Length 23 mm
Threaded length 7 mm
Shaft diameter 3.7 mm

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

6730/52 FG Grub screw with safety device M5x5mm Torx, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.20*

6730/05 FG Allen Grub screw M5x5 mm, 15 Stück

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.40*

8496/02 FG Adjustment screw - 2pcs.

Item N°8496/02 Adjustment screw - 2pcs.Spare part for .Total length: 23 mmThread: M5Pin: 4 mmPart is delivered in silver or black color from vendor!

€5.90*

32437 Alles Grub screw M5 x 5 mm, 5 pcs.

Genuine Smartech spare/option part.Part is delivered in silver or black color from vendor!Content:5 pieces

€4.25*

y0190/01 Grub screws M8 x 8mm - 5pcs

Item No.: y0190/01Grub screws M8 x 8mm - 2pcs. Spare part from:- y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft- y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaftPart is delivered in silver or black color from vendor!

€2.20*

ARA724606 ARRMA Set Screw M6x6mm

Genuine ARRMA spare/option part. Contents:4 pieces

€4.99*

6729/04 FG Allen Grub screw M4x4 mm, 15 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.30*

Z721 HPI Grub screws M4 x 4 mm

Genuine HPI spare/option part. Content:4 pieces

€4.38*

104964 HPI Grub screws M5 x 8 mm

Genuine HPI spare/option part. Part is delivered in silver or black color from vendor!Content:4 pieces

€3.10*

AR724505 ARRMA Set Screw 5x5mm

Genuine ARRMA spare/option part. Contents:10 pieces

€4.99*

32438 Allen Grub screw M4 x 4 mm, 5 pcs.

Genuine Smartech spare/option part.Part is delivered in silver or black color from vendor!Content:5 pieces

€5.35*

Z700 HPI Grub screws M3 x 3 mm

Genuine HPI spare/option part. Part is delivered in silver or black color from vendor!Content:6 pieces

€4.38*

Customers also viewed

6113 FG Wheel nuts M6 self-locking

Genuine FG spare/option part.Self locking wheel nuts with serrated base.Part is delivered in silver or black color from vendor!Contents:10 pieces

€7.30*

68534 FG Conversions kit Sportline Touringcar long to 4WD

For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.

€189.50*

6720/40 FG Countersunk screw M4x40 mm, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€6.50*

FG Challenge Line 2WD-530 with BMW M3 ALMS body and 26 cm³ FG engine

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 780 mmWidth: 392 mmHeight: 240 mmWheelbase: 530 mm

From €849.90*

Configure now

FG Challenge Line 2WD-510 with BMW M3 E30 body, 26 cm³ FG engine

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.A roll cage was installed for more rigidity and protection of the vehicle.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €929.90*

Configure now

6013 FG Body clips

Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€4.95*

Configure now

TLR255016 TLR Setscrew Cup Point M4 x 8 mm

Genuine TLR spare/option part.Dimensions:M4 x 8 mmContents:10 piecest

€5.99*