28 products found for "y0781"

Catalogue #1

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

y0781/01 Dry-Fluid "Gear Lube" for gears, 10/20 ml

y0781_01 Size: y0781/10 - 10 ml

Dry lubricant instead of oil DryFluid Extreme Gear Lube is specifically designed for highly loaded gears in models. It is characterized by extreme pressure resistance and excellent adhesion. Through the use of solid lubricant components, it shows only a slight tendency for dust and dirt retention. Main applications of the newly developed Gear Lube Gear are of model helicopters, rc-cars and trucks, model trains and servos. Also ideally suited for shafts and gimbals of any kind.DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Especially the long-term effects of DryFluid Extreme will delight any modeler. Product characteristics at a glance: Exciting lubricating propertiesReduces power losses caused by friction Reduces operating noise Reduces wear Extremely pressure resistant Long-term stability Highest adhesion High material compatibility with metals, plastics and rubber materials Low tendency for dust and dirt binding Application Notes: A thin layer of the Gear Lube is enough for an extreme lubricating effect. If possible, apply to an upright standing gear and rotate it during the application. For hard to reach places and selective applications use the included canula. For fine and uniform distribution use a fine hair brush immediately after the application of Gear Lube. Transmissions that have not been treated with Gear Lube before should be thoroughly cleaned first. Shake well before using and apply sparingly!High End dry lubricant for highly loaded gears in models. Especially for transmissions of model helicopters, rc-cars, trucks, model trains and servos. Can also be used for shafts and gimbals of any kind Through the use of dry particles, lubricating polymers and high-end lubricating fluids an unprecedented lubricating effect is achieved. Extremely pressure-resistant and with excellent adhesion. Very low tendency for dust and dirt retention. Multistage dry lubricant system with long-term effects.

Content: 10 Milliliter (€1,690.00* / 1000 Milliliter)

€16.90*

y0789 Chassis mud flaps for Losi 5ive-T/2.0

Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

y0780 RC-Car Comfort relax chair / camp-chair

Extremely rugged steel construction with comfortable, one piece seat and back rest Premium version made of coated 22 mm diameter steel tube, with horizontal folding mechanism and black, back-supporting and tear-resistant high quality upholstery fabric. Back rest with printed RC-Car logo on both sides. Padded black fabric armrests.Unfortunately, due to the folding mechanism and the bulky storage of these chairs, some scratches on the steel pipe are inevitable! Dimensions, folded: Length: 80 cmWidth: 50 cmHeight: 7 cm Dimensions set up:Total height: 80 cmSeat height 47 cm Seat:Width: 50 cmDeep: 40 cmWeight: 4.4 kg

€39.90*

y0784/03 Audi A4 body shell with silver painting

Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm

€219.90*

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

gewinde_0005_02 Length: 66226B 84 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

y0784/138 Painted Stadium Jeep body shell Camouflage

Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

€259.90*

y0784/31 BMW E46 body shell with Mafia team decals

Flaws:The paint flakes off at several points on body shell, mirrors or door handlesOne hole for the body mount is tornRequired body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm

€269.90*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 6100/04 40 mm+ 1.2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.10*

y0784/23 Seat Toledo body shell with Repsol painting One of a kind

Defects:The color of the bodywork has been slightly altered by exposure to the sun in the window dressing (see photos).Fits 535 wheelbase

€390.00*

y0782/01 Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005_01 Length: 108 mm, 67267+ 5.4EUR

Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*

€25.30*

y0784/35 Porsche GT3 RSR, white with Casino / Lucky Seven team decals

Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 405 mmHeight: 240 mmWheelbase: 510 mm

€349.90*

y0783 LiPo battery 3S/4000 mAh 11,1 V 45C/80C, 1 pce

Battery pack, suitable for FG electric models (two packs required).The housing of the cell is made of aluminum-plastic. High-performance LiPo battery for applications with high discharge rates.High power ratings guarantee excellent performance: continuous discharge rate 45C, burst rate 80C and charge rates of up to 5C.Only carefully selected cells are soldered together into a pack. Specifications: Cells: 3S Voltage: 11.1 V Capacity: 4000 mAh Length: 137 mm Width: 44 mm Height: 29 mm Weight: approx. 360 grams Continuous discharge rate: 180 A Burst discharge rate: 320 A Charging current: 5.0 ... 25.0 A XHP balancer connector, with XHP / EHR adaptor cable

€99.90*

Rose joints, y0881 - 2pcs.

Rose joints for FG models (replaces FG # 4466), high quality version with bronze case.Price per pair.A = 5 mmB = 6 mmC = 8 mmD = 13 mm

€20.50*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0081 Spark plug cap shield

Genuine Hobbythek spare/option part.Spark plug cap shield, the 2-piece shield will be but around the stock spark plug cap and crimped together. Very effective, solves all ignition related radio problems!Fits Zenoah G230/240/260/270/290/320 and Chung Yang, Losi, HPI engines; for Smartech/Carson PT engines the cylinder shroud has to be modified slightly.Content:1 piece

€14.90*

y0481 Various Zenoah Label, 1 St.

y0481 y0481 Diverse Zenoah Label, 1 St.: y0481/01 G230RC Zenoah Label

Glossy Zenoah stickers.

€4.90*

y0751 K&N Filter cleaner 946 ml

Genuine K&N spare/option part. K&N Power Kleen is a high-performance cleaner and degreaser used to remove road grime, engine exhaust and grease from cotton air filters. It is now formulated to clean those troublesome and demanding cleaning jobs. This cleaner is specially formulated to remove oil, lubricants, grease, grime, and other deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more! Genuine K&N air filter cleaner,especially formulated for cleaning cotton air cleaners.Content:946 ml / 32 OZ

Content: 946 Milliliter (€16.17* / 1000 Milliliter)

€15.30*

y0701/01 Single-sided split alloy servoarm

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft!Suitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HV Nearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 piece

€12.90*

y0721 Receiver battery, hump pack, NiMh, 4500 mAh

y0721 Connector: y0721/01 - BEC

5 cells, 6 volt, cell size Sub-C.Fits for all HPI 1/5 scale models.Dimensions: approx. 69 x 51 x 42 mmUniversalFGBECHigh current

€54.10*

y0701 Double sided split alloy servoarm, 1 pce.

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€14.90*

y0791 SPEED TEC EXPERT Zenoah G240 tuning engine

The SPEED TEC EXPERT genuine Zenoah G240 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

y0731 GPM Big Scale-Race adjustable 3 block clutch

Genuine GPM spare/option part. The Big Scale-Race clutch is equipped with 1.4 mm springs, is especially suitable for On-road use (not for Formular 1).Adjustable 3-shoe clutch for:ZenoahChung YangHPI - FueliSmartech PTAnd many other enginesThe GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!y0730y0731Content:1 piece

€99.90* €129.90* (23.09% saved)

y0791/01 SPEED TEC EXPERT Zenoah G240 tuning cylinder set

Race ported top end set for Zenoah G240 engine.The SPEED TEC EXPERT genuine Zenoah G260 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe ().Each SPEED TEC Tuning cylinder set comes with a small amount of a spec. assembly lube for the installation of piston and piston ring. This spec. lube provides the required lubrication to the engine for the first start and dissolves without residue!

€229.90*

y0741 Aluminum air filter adapter for Losi 5ive-T with velocity stack, 1 pce.

The aluminum air filter adapter replaces the plastic base plate with the same dimensions of a 5ive-T (not 2.0!) air filter. Its rigidity ensures a reliable seal to the carburetor. It will not warp; neither by high temperatures nor by tightening the mounting screws.This Venturi-insert/adapter prevents that unfiltered intake air perhaps comes into the engine!The additional velocity stack will simply be inserted into the cage for the inner filter foam. It conceals the mounting screws almost completely, providing excellent flow characteristics and improved performance.Comes complete with installation hardware and gaskets included.Scope of delivery1x Air filter adapter2x Countersunk screw 5x501x Carburetor gasket1x Air filter gasket

€39.90*