38 products found for "y0723"

Catalogue #1

y0723 Gas-nitrited tuning clutch bell for FG, Smartech/Carson, Harm, RS5 & Co.

Genuine HT spare/option part. Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.Contents:1 piece

€49.90*

y0720 rc-car-online Transmitter bag

Genuine HT spare/option part. Extremely sturdy, fully padded transmitter bag! Fits all popular pistol grip transmitters Top quality; with padded adjustable length retaining straps to secure the transmitter, large zippered flap and adjustable carrying strap. Dimensions: Width: 23 cmHeight: 34 cmDepth: 17 cmContents:1 piece

€27.00*

y0726 Gas-nitrided tuning clutch bell for Losi 5ive-T/2.0/B and Mini

Gas-nitrided tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Extreme clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.The bolt hole is countersunk from the inside so you can also use a flat head screw from the inside and a nut on the outside if you like. Content:1 pieces

€49.90*

y0729 Gas-nitrited tuning clutch bell for HPI Baja, Carson Wild GP Attack models, 1 pce.

Gas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface whichguarantees dimensional stability even under high loads!Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM clutches Big Scale Extreme and Cross.Suitable for slot drive HPI Baja pinions, both stock using a 4mm bolt and aftermarket ones for 5mm bolts. Comes with M4 and M5 bolts included.

€49.90*

y0753 Servo mount adapter

Genuine HT spare/option part. This machined aluminum servo adapter allows easy installation of servos with a 69 x 18 mm mounting bolt pattern (for example Orange-Power, S8203) in vehicles / radio plates which provide a 75 x 18 mm mounting bolt pattern (for example Losi 5ive-T, Mini WRC, HPI Baja 5 series cars, many FG cars).The use of this adapter servo will neither tilt the servo, nor does it change installation height. Scope of delivery:1 x Servo mount adapter2 x Socket head cap screws 3 x 20 mm2 x Socket head cap screws 3 x 12 mm2 x Shim ring 3,2 mmContents:1 piece

€9.90*

y0273 Opel Vectra team decals Valvoline - set

Valvoline team decals for Opel Vectra body shell.Sheet dimensions:500 x 230 mm (3x)230 x 80 mm

€29.00*

y0523 Special cleaner for foam air filters, 500 ml

Genuine rc-car-online spare/option part. Foam-Cleaner, special cleaning agent for foam air filter elements and GPM coverThe foam-Cleaner is specially designed for RC foam air filters, as well as covers for starter, filter and shocks. Removes reliably dirt, mud, dust, old filter oil, and sand particles and ensures optimum air flow. After cleaning please oil the air filter with air filter oil with order-no. y0284 for foam filters before re-use. Routinely cleaning of filters protects against premature wear and extends engine life!Use: apply cleaner to filter/cover, wait for some minutes and rinse with warm water. Let the parts dry before re-use.Bottle with 500 ml.Contents:1 piece

Content: 500 Milliliter (€19.90* / 1000 Milliliter)

€9.95*

y0733 Big Scale-EXTREME, adjustable 3-jaw clutch, used

The Big Scale-EXTREME is an adjustable clutch designed for very special requirements: For high-displacement engines For "weighty" or particularly high-traction models (Losi, HPI) For performance-enhanced tuning engines For demanding off-road use Rapid wear of a clutch is a sign of constant grinding, even though the engagement speed has actually already been exceeded. In this case, the clutch is not transmitting the available torque.This is where the Big Scale Extreme sets new standards. The new design of the Extreme prevents the centrifugal forces of the clutch springs or the lever side of the clutch shoes from counteracting the centrifugal force of the lining side even after the clutch has engaged. The result is an enormous load capacity with minimum wear. The new design means that the resulting centrifugal forces are fully transferred to the clutch lining. Defined engagement and disengagement even under high loads and in closed clutch housings is no problem for this clutch. Even when installed, the clutch can be easily adjusted to the desired speed or the optimum frictional connection to suit the engine's performance capacity using three adjusting screws. The special clutch lining of the Big Scale-EXTREME is particularly low-wear and guarantees an exceptionally long service life, especially in combination with a high-quality, nitride-hardened clutch bell ()! In contrast to the "Cross" or "Race", the clutch does not have to be removed from the engine for maintenance work. All components are accessible from the front after removing the front plate. Adjustment instructions etc. can be found under technical data! The standard price of the Big Scale-EXTREME is 149.90 EUR Please note, the clutch is used! See photos for condition and scope of delivery.

€89.00*

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€119.90* €149.90* (20.01% saved)

y0623 Supergrip C6 wheels on rims chrom

Off-Road tires mounted and glued on rims, on chrome rims. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Dimensions:Diameter: 150 mmWidth: 60 mmWheel square: 18 mmContents:4 pieces / 2 pairs

€89.90* €119.90* (25.02% saved)

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads

Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*

y0703 - 1:6 Spoiler, white, 1 pce.

Item-No.: y07031:6 Spoiler, white, 1 pce.Thickness: approximately 3 mmSuitable for most 1/6 FG, Carson, etc. models.

€14.90*

y0783 LiPo battery 3S/4000 mAh 11,1 V 45C/80C, 1 pce

Battery pack, suitable for FG electric models (two packs required).The housing of the cell is made of aluminum-plastic. High-performance LiPo battery for applications with high discharge rates.High power ratings guarantee excellent performance: continuous discharge rate 45C, burst rate 80C and charge rates of up to 5C.Only carefully selected cells are soldered together into a pack. Specifications: Cells: 3S Voltage: 11.1 V Capacity: 4000 mAh Length: 137 mm Width: 44 mm Height: 29 mm Weight: approx. 360 grams Continuous discharge rate: 180 A Burst discharge rate: 320 A Charging current: 5.0 ... 25.0 A XHP balancer connector, with XHP / EHR adaptor cable

€99.90*

y0793 SPEED TEC EXPERT Zenoah G270 tuning engine

The SPEED TEC EXPERT genuine Zenoah G270 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

y0728/06 GRP tires sponsor decals

Sponsor decal set from GRP with five GRP lettering.Measures:Width: 150 mmLength: 140 mm

€4.90*

y0732 GPM Big Scale Cross adjustable 3 shoe clutch with tuning clutch bell, 1 pce.

Regular price Big Scale Clutch: 109,90 EUR Nitriding hardened clutch bell: 40,50 EUR complete price:.......................150,40 EURAdjustable 3-shoe clutch for:Zenoah / Chung Yang / HPI - Fuelie / Smartech PT and many other engines.The Big Scale-Cross clutch is equipped with 1.3 mm springs. This version is particularly suitable for off-road use.The GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!

€129.99*

y0722 Axle plugs for Losi 5ive-T/2.0, Mini

y0722 Quanity: y0722/01 - Set of 4

For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

€3.90*

y0721 Receiver battery, hump pack, NiMh, 4500 mAh

y0721 Connector: y0721/01 - BEC

5 cells, 6 volt, cell size Sub-C.Fits for all HPI 1/5 scale models.Dimensions: approx. 69 x 51 x 42 mmUniversalFGBECHigh current

€54.10*

y0728/04 Decal set for 1/5 scale Lancia Delta Martini

Decal set with the original Lancia Delta Martini venyl. Lights, indicator, rear lights are also included.Measures:Width: 350 mmLength: 500 mm

€19.90*

y0726/01 Gas-nitrited tuning clutch bell for Losi DBXL+MTXL

Genuine HT spare/option part. Gas-nitrited tuning clutch bell with black oxide coating, machined from high grade. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well. This clutch bell is dimensionally identical to the stock part. Heat treatment and the use of a high grade material guarantee long service life.Due to a special heat treatment the clutch bell surface is shaded; this does not effect the function, but ensures great durability.Contents:1 piece

€49.90*

y0733/09 Front plate

Front plate, spare part for BigScale Extreme clutch.

€19.90*

y0733/08 Clutch body

Clutch body, spare part for BigScale Extreme clutch.

€29.90*

Low voltage failsafe module, y0423 - 1pce.

To protect a car from a crash in case the power supply fails is no easy task. The mechanical devices that are used to do the job are either bulky or cause a higher drain from the battery. The failsafe module is a more efficient way.The module controls the battery pack's voltage and takes control of the throttle servo when the voltage goes below 4.7 volts. As an additional feature you can supply a backup battery pack to power the throttle servo in case the main pack falls completely. The failsafe position of the throttle servo is adjustable.

€49.30*

y0733/03 Mounting screws for friction pads and front plate

Mounting screws for friction pads and front plate, spare part for BigScale Extreme clutch.Dimensions:M3 x 7 mm (f0r 2 mm allen wrench)

€3.90*