47 products found for "y04475"

Catalogue #1

y04475 HT Rear alloy shock mount 2WD

Genuine HT spare/option part.Rear alloy damper plate with several adjustment possibilities of the shock absorbers. Replacement for FG plastic rear shock tower FG 7072/01Please note: When installing in combination with plastic diff mounts you should insert a-arms with hinge pins before bolting together rear plate and diff mounts.Content:1 pieces

€89.90*

y04476/021 HT Alloy rear diff mount l/h one-piece-solid

Genuine HT spare/option part. Suitable for all FG 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1.Contents:1 piece

€54.90*

y04474 HT Rear upper alloy wishbone 2WD

Genuine HT spare/option part.Rear upper alloy wishbone with droop stop. Replacement for plastic wishbone FG 6074/02.Will also fit the following Carson/Smartech cars:Onroad chassis C5, Attack, Super Attack, Gas Blaster and TouaregCarson Comanche, Attack Evo, CRT + CPT when installedwith 75 mm turnbuckle y0988Comes with 2 M8 low height nuts included. Contents:2 pieces

€69.90*

y04476/022 HT Alloy rear diff mount r/h one-piece-solid

Genuine HT spare/option part. Suitable for all FG 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1.Contents:1 piece

€54.90*

y04472/05 HT Rear lower alloy wishbone narrow

Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

€44.90*

y04476/02 HT Alloy rear diff mount l/h+r/h one-piece-solid

Genuine HT spare/option part. Suitable for all FG 2WD and Smartech/Carson 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1. Content:2 piece

€99.90*

Charging cable for receiver battery with AMP plug, y0447, 1 pcs.

Charging cable for all hump packs an batteries with AMP plug. Also fits for the internal charging jack from the HPI Baja 5b and the HPI Baja 5t cars.

€7.40*

y0443 EC3 charging cord

Heavy gauge (14 AWG / 2 mm²) charging cord with EC3 plug and gold plated contacts. Especially for Losi/Horizon rx-batteries which feature an EC3 connector additionally to the regular rx-connector. The EC3 system can candle much higher charging rates which reduces charging time of high capacity battery packs significantly.Dimensions:Length approx. 20 cm

€8.90*

4475 FG Rear alloy shock mount - 1pce.

Genuine FG spare/option part. Rear aluminum damper plate including screws.Replacement for plastic rear shock tower FG 7072/01.Content:2 pieces

€99.90*

y04492 HT Rear lower alloy wishbone for FG 1/6 cars

Genuine HT spare/option part.Please note: must use hinge pins 6075 instead of 6073!Contents:1 piece

€49.90*

y0441 HT Rim reinforcement for FG 60200 and 60205 rim

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Off-Road rims 60200, 60201 (wide) and 60205, 60206 (narrow).14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 piece

€26.90*

y0442 HT rim reinforcement all FG-Monster and Stadium rims

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€29.90*

y0440 HT Rim reinforcement for FG rim 6105, 6105/01 and 3105

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Off-Road rims 6105, 6105/01 (white) and 3105 (silver).14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€24.90*

4475/01 FG Rear alloy shock mount 08

Genuine FG spare/option part. Rear alloy damper plate with several adjusting possibilities of the shock absorbers. Through assemly of the corresponding guide bushes the wishbone pin or respectively the upper wishbone can be adjusted to 2°, 3° and 4°.Use the spacer bushing only for installation of the rear shock in twin shock applications, f. e. for the Monster models.Replacement for FG plastic rear shock tower FG 7072/01Contents:1 piece

€119.50*

y0415 Receiver battery charging cable

akku_0018 Version: y0415/04 BEC-connectr+ 2.4EUR

Genuine HT spare/option part.Charging cable for receiver batteries.Content:1 piece

€11.60*

y1447 Barbed hose fitting for carburetor

Genuine HT spare/option part.Chromed metal 90° fitting fits Walbro and Ruxing carbs.Contents:1 piece

€14.90*

This product is no longer available.

y0425/03 Parallel Y-harness

Genuine rc-car-online spare/option part. Optional equipment part for Axial Jeep Wrangler 4WD 1/6.Features:14 AWG to 10 AWGEC5 connectorsContent:1 piece

€19.80*

Opel Vectra vehicle decals, y0275 - set

The vehicle decals include lights, grille and so on, no team decals.Sheet dimensions:480 x 260 mm480 x 225 mm

€20.50*

y0975 Alloy spring retainer big or small to choice

y0975 Version: y6092 Replaces FG 6092

y7092 Alloy spring retainer, smallGenuine HT spare/option part.Alloy spring retainer, replaces FG 7092 or Carson 32556.Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaftContents:2 piecesy6092 Alloy spring retainer largeGenuine HT spare/option part.Alloy spring retainer, replaces FG 6092.Fits all FG shocks with 20 mm body (OEM shocks on all FG buggy / monster / stadium models and tuning shocks 6481 / 6482) and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 25 mmAccepts springs with approx. 20 mm inner diameterSlot for 4 mm shock shaftContents:2 pieces

€19.90*

y0487 Air filter adapter for Solo engines, 1 St.

With this adapter you get all the major solo air boxes mounted on her solo motor.

€9.90*

10475 FG Rear alloy upright for F1

Genuine FG spare/option part.Rear alloy upright for the Formula 1 models. CNC-cut, optimal fitting, non-twisting even by heat. Recommendable when mounting a disk brake.Contents:2 pieces

€105.95*

This product is currently not available.

y1475 Special front hinge pin brace set for Losi Mini

Genuine HT spare/option part.These hinge pin braces are machined from 7075 aluminum and feature an increased distance between the holes for the hinge pins. They are to be used in place of stock braces LOSB 078F.This allows the use of the front center drive shaft from the 5ive-T LOSB3218 at the wheels. This one is slightly longer than the Mini shaft for the wheels LOS252000, but will be available as spare part in the future. The turnbuckles on steering rods and camber links need some minor readjusting after assembly to restore the correct geometry.At the rear LOSB3218 driveshafts will fit the Mini without modifications. Set with one each front and rear hinge pin brace.Contents:1 set

€24.90*

y0425/02 Y-harness current, universal connector

Genuine rc-car-online spare/option part. Total length:approx. 200 mmContents:1 piece

€14.90*

This product is currently not available.

y1445 MadMax Maxi Pin tyre, 1 pair

MadMax MAXI PIN tyres have been specially developed for carpet race tracks! The special block tread pattern, with 480 knobs per tyre, provides excellent grip, but also puts extreme strain on the tyre and the rim. To stabilise the tyre, the outside of the tyre shoulder is equipped with vertical ribbing on the side, which minimises tilting under load and counteracts the shear forces that occur in bends. Furthermore, the MAXI PIN tyres have knobs positioned on the side of the outer side, which particularly support the steering behaviour of your RC car in bends. Taken together, the MAXI PIN tyres provide maximum grip. Dimensions: Outer diameter: 185 mm Tyre width at the outer edge of the tread: 75 mm 1 pair

€29.90*