20 products found for "y0203"

rc-car-online - Home

y0205 HT steel pinion 17 teeth Carson/Smartech Offroad 2WD models

Original rc-car-online spare/tuning part. The sprockets are milled from steel and nitride-hardened. They all fit on the standard main gear and are fastened with 2 grub screws. The sprockets are profile-shifted and therefore all have the same diameter! Module: m=1.51 piece

€29.90*

y0206 HT steel pinion 18 teeth Carson/Smartech Offroad 2WD models

€29.90*

y0207 HT steel pinion 19 teeth Carson/Smartech Offroad 2WD models

€29.90*

y0208 HT steel pinion 20 teeth Carson/Smartech Offroad 2WD models

€29.90*

y0203 Shaft seal conversion kit for Losi 5ive-T and Mini differential

This kit replaces the o-ring for sealing the drive cup shaft in the stock differential case by a real oil seal. Two new shims provide for the adjustment of the width of the shaft seal and replace the stock shim.Shaft seals are better than o-rings for sealing fast rotating shafts.The set includes the parts for retrofitting all three differentials of the vehicle.Installation can be done only in the differential housing. Unfortunately the corresponding bore in the differential gears is machined differently, so you have to stay with the O-ring for that application.Set includes:Three pieces shaft seal 10 x 15 x 3 mmThree pieces shim 15 x 21 x 0.2 mmThree pieces shim 10 x 20 x 0.3 mmFive pieces washer 10,5 x 20 x 2 mm

€6.90*

y0243 Tension adjustment clips

Genuine HT spare/option part. For easy, precise and equal adjustment of spring tension, fits all 1/5 and 1/6 shocks with a body diameter of 15 - 16 mm.Set with two clips each of 1, 2, 3, 4, 5 und 6 mm thickness.Contents:1 set

€3.95*

y0003 Billet brake lever, long

Genuine HT spare/option part. Fits HT Baja 5B premium brake and FG offroad models, race truck and Formula 1.Contents:2 pieces

€24.90*

y0703 - 1:6 Spoiler, white, 1 pce.

Item-No.: y07031:6 Spoiler, white, 1 pce.Thickness: approximately 3 mmSuitable for most 1/6 FG, Carson, etc. models.

€14.90*

y0273 Opel Vectra team decals Valvoline - set

Valvoline team decals for Opel Vectra body shell.Sheet dimensions:500 x 230 mm (3x)230 x 80 mm

€29.00*

y1203 HS gilmer belt for FG 4WD cars, 1 pce.

Dimensions same as FG 66237.Very high rupture strength and tearing resistance as well as reduced wear make this belt the perfect choicefor race applications where maximum reliability is a must.Fits cars with 490 and 510 mm wheelbase only. Does not fit WB535 cars! For all FG Offroad 4WD models with 490-510mm ( Offroad buggy, monster and stadium) and all FG Sportsline 4WD 510 ( Porsche GT3, Mini and BMW E30 ) leng 635mm, wedth 18mm.

€34.90*

y0230 Ball bearing set for HPI Baja 5B/T,Carson 1:5 Wild GP Attack, sealed

21 bearings, contains all ball bearings of the car, including servosaver.Set includes12 pcs. 12x24x6 mm4 pcs. 5x10x4 mm2 pcs. 10x15x4 mm2 pcs. 17x30x7 mm2 pcs. 20x32x7 mm

€39.90*

Alloy radio tray posts, y0209, 2 pcs.

Radio tray posts, diameter 7.5 mm, length 38 mm, M4 thread.2 pieces with screws.

€9.20*

y0204 HT-Steel pinion extreme duty

zahn_0002 Size: y0204 - 12 Teeth

Genuine HT spare/option part.Coarse pitch pinion for the layshaft, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Carson Attack/Firehammer/Smartech Traveller, Carson Comanche, Touareg a.s.o.Fits FG and Smartech / Carson cars. Only for use with the extreme duty differential ring gear! Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€28.90*

HT-Differential ring gear, 50T, y0201 - 1pce.

Reinforced version with heavy gauge tooth base. Recommended for monster models and all buggies.Does not fit Elcon differential!Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€49.90*

y0202 HT-Differential ring gear, extreme duty, 41Teeth

Genuine HT spare/option part.Coarse pitch spur gear for the differential, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Smartech / Carson 2WD cars.Only for use with the extreme duty pinions! Not for use in combination with Elcon rear drivetrain unit or Elcon differential!Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€49.90*

y0003/01 Pin for Billet brake lever y0003 and y0015

Genuine HT spare/option part. Fits for the brake levers with the numbers y0003 and y0015.Contents:2 pieces

€2.90*

y2003 Tuning front suspension set for nearly all FG 4WD Sportsline cars

y2003 Model: y2003/01 - FG 4WD Monster-Truck models, Beetle+ 40EUR

Tuning front suspension set for all FG 4WD Sportsline cars: Monstertruck; Baja; Marder; Beetle; touring cars:Not fit Formular 1, Leopard and Truggy!y2003/01 fits:FG 4WD Monster-Truck models, Beetle.Part number:Name:y68412Aluminum front lower a-armsy2000Alu Querlenker Front unteny68413Aluminum front uprightsy0563Aluminum shock tower Monster-Truck/Beetley1036Rose joint for alloy wishboney2003/02 fits: FG 4WD Baja Buggy.Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishboney0579Alloy roll cage brackety2003/03 fits:FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR. When installing in a Porsche GT3 RSR or Mini Cooper 4WD with 510 mm wheelbase, the steering travel limiter must be installed into the first threaded hole of the knuckle arm and not at the standard location on the knuckle as in off-road cars!Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishbone

Variants from €469.90*

€509.90*

500502033/100 Carson CY-Eline Brushless engine 1.600 Kv

Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€179.99*

500502032/100 Carson CY-Eline Brushless controller 150A

Genuine Carson spare/option part. Fits CY-Eline models.Continuous Current: 150ABattery NIXX / LiPo: 6-18NC / 2-6S LiPoBEC: 3A/5,75VContents:1 piece

€199.99*

HW38020369 Hobbywing Ezrun MAX4 HV Combo 70125 560kV

Product information "Hobbywing Ezrun MAX4 HV Combo 70125 560kV"The Ezrun MAX4 ESC works best with the included 70125 SD 560kV motor for extra large 1/4 and 1/5 scale models. This fully sensor-controlled combo can be used in many ways in such models, whether it's a heavy-duty off-roader or a truck.So if you like large models and You want the most fun out of it, the MAX4 combo is high-quality equipment that literally bursts with exploding power. And even with its enormous size, care was taken to use high-quality and, above all, durable materials in the construction. After all, both the ESC and the motor should ensure that driving fun lasts as long as possible. Even the electronic switch is well protected against damage. In addition, the Ezrun MAX4 has a built-in super high-current BEC, which can provide a max. output power of up to 25A. The output voltage can be switched between 6V, 7.4V and 8.4V. The high-current BEC was developed in such a way that it can supply the current high-current servos with sufficient power if required, and thus be able to precisely control the appropriate large models.Features:Full sensored comboSuper powerful switch mode BEC with a constant current of 10A, instant 25A and the ability to switch between 6V, 7.4V and 8.4VFireproof circuitry to protect the battery connector, as well as many built-in protectionsVersatile programmableReal time data recordingCNC-milled aluminum housing, 0.2mm silicon steel sheets and other high-quality building materialsFour sintered NdFeB magnets for super torque, stable performance and explosive powerInnovative new sensor interfaceWaterproof and dustproof thanks to the rubber cover of the bearingsIndependent, high-precision encoder in the motor to communicate the rotor position without any interferenceMore power and less heat development with the same loadTechnical Specifications:ESCCurrent (cont./peak)300A / 2000AMotor Type:Sensor/Sensorless Brushless MotorsMotor Limit:12S LiPo: kV <= 600 (70125)Cells:6-12SBEC:6V / 7.4V / 8.4V @ 10A (adjustable)Fan:Yes (powered by BEC)Programming Input:Fan/ PRG-InputProgramming:LED Programm Card, LCD Programm Box, OTA Bluetooth Programm ModuleDimensions:125x85x61.7mmWeight:775.4gApplication:1/4 and 1/5 Heavy Duty-Off-Road, TrucksMotorSensor Type:SensoredPoles:4kV Rating:560kVCells:8-12SNo-Load Current:3.6AOuter Diameter:70mmLength:125mmShaft Diameter:8mmShaft Length:30mmWeight:1995gApplication:1/5 Heavy Duty Off-Road, TruckDelivery:1x EzRun MAX4 ESC1x EzRun 70125SD Motor with 560kV1x Manual

€542.40* €576.00* (5.83% saved)

20 products found for "y0203"

Filter products

rc-car-online - Home