156 products found for "vpin"

rc-car-online - Home

y1234 V-Pin 1/6 offroad competition tire

vpin Rubber compound: y1234/01 - Soft

The V-pin competition tire is particularly suitable for tracks with loose and sandy surface. The high tread profile, extended to the tire shoulder requires a high manufacturing cost. This tread design guarantees an extremely high side traction and provides maximum propulsion especially on surfaces like sand and loose soil for optimum. A well proven combination is the use of in the rear and V-pin at the front. By cutting of the tread profile of the V-pin tires you can adjust your car's handling easily. The partly or nearly complete removal of the V-pin tire's tread on the outside of the tire, greatly affects the tire's side bite when cornering.Please take a look at the corresponding pics:Pic A - very high lateral grip = car tends to oversteerPic B - high lateral grip = still sharp steering responsePic C - reduced lateral grip = neutral handlingPic D - low lateral grip = expect the car to understeerOf course, the before mentioned does depend on the track surface!Summarized: removing tread from V-Pin tires on the front axle will reduce oversteering, calm your car and make it easier to drive.When oversteering is extreme (e.g. high grass) you may even start cutting the tread on the inside shoulder. This can prevent your car from those annoying traction rolls.For very loose soil the soft compound is recommended, under normal condition the medium compound is usually your best choice.HPI Baja 5 cars can also use these tires when equipped with special adapters. Dimensions:Diameter: 163 mmWidth: 65 mmInner diameter: 106 mm

€39.90*

y1235 V-Pin 1/6 offroad competition tire, mounted and glued, 1 pair

vpin_geklebt Rubber compound: y1235/01 - Soft

The V-pin competition tire is particularly suitable for tracks with loose and sandy surface. The high tread profile, extended to the tire shoulder requires a high manufacturing cost. This tread design guarantees an extremely high side traction and provides maximum propulsion especially on surfaces like sand and loose soil for optimum. A well proven combination is the use of Mammoth tires in the rear and V-pin at the front. By cutting of the tread profile of the V-pin tires you can adjust your car's handling easily. The partly or nearly complete removal of the V-pin tire's tread on the outside of the tire, greatly affects the tire's side bite when cornering. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Please take a look at the corresponding pics:Pic A - very high lateral grip = car tends to oversteerPic B - high lateral grip = still sharp steering responsePic C - reduced lateral grip = neutral handlingPic D - low lateral grip = expect the car to understeerOf course, the before mentioned does depend on the track surface!Summarized: removing tread from V-Pin tires on the front axle will reduce oversteering, calm your car and make it easier to drive.When oversteering is extreme (e.g. high grass) you may even start cutting the tread on the inside shoulder. This can prevent your car from those annoying traction rolls.For very loose soil the soft compound is recommended, under normal condition the medium compound is usually your best choice.Dimensions:Diameter: 163 mmWidth: 65 mmInner diameter: 106 mmPrices of the components:V-Pin tires EUR 39.90 / pairV-Pin tire inserts EUR 9.90 / pairRims FG 6105/01 EUR 14.90 / pairglue set y0067 EUR 13.30Total EUR 78.80Ready mounted and glued EUR 69.90 / pairRim with 18 mm square driveAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€69.90*

y1445 MadMax Maxi Pin tyre, 1 pair

MadMax MAXI PIN tyres have been specially developed for carpet race tracks! The special block tread pattern, with 480 knobs per tyre, provides excellent grip, but also puts extreme strain on the tyre and the rim. To stabilise the tyre, the outside of the tyre shoulder is equipped with vertical ribbing on the side, which minimises tilting under load and counteracts the shear forces that occur in bends. Furthermore, the MAXI PIN tyres have knobs positioned on the side of the outer side, which particularly support the steering behaviour of your RC car in bends. Taken together, the MAXI PIN tyres provide maximum grip. Dimensions: Outer diameter: 185 mm Tyre width at the outer edge of the tread: 75 mm 1 pair

€29.90*

y1324 MadMax tyre inserts green 165x65mm, for Maxi Pin tyres

Mittelfeste, geschäumte, grüne Reifeneinlage mit profilierten Kanten und eingeformten Senkungen für die Felgenverschraubung.Die mittlere Shorehärte der grünen Reifeneinlage in Topqualität stützt die Reifenschulter optimal und ermöglicht somit ein perfektes Abrollverhalten des jeweiligen Reifens.Die ideale Einlage für einem Reifendurchmesser von 185mm und 70mm breite.Ersatzteil zu MadMax Reifen Maxi Pin.2 Stück, 1 Paar

€29.90*

0062 UFRC Hinge pin

Genuine UFRC spare/option part. Fits Growler GX1.Contents:2 pieces

€9.90*

y1016/026 Piston pin G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.Dimensions: Outer diameter: 9 mmInner diameter: 6mmLength: 32 mm

€9.80*

LOS252030 Wheel adapter with pin 6IX

Genuine Losi spare/option part.Content:2 pieces

€20.99*

y1229, Maxi-Pin and V-Pin foam rubber tire insert, 1 pair

Especially flex and abrasion resistant insert made of foam rubber. Dimensions specifically to match Maxi-Pin and V-Pin tires, but may be used for other tires at your own discretion as well.Length 380 mm

€9.90*

500405215 Carson Steering pin

Genuine Carson spare/option part. Contents:2 pieces

€13.99*

R078 UFRC King Pin

Genuine UFRC spare/option part. Fits Ghost Rabbit GR1.Contents:4 pieces

€32.90*

E540021 UFRC King pin

Genuine UFRC spare/option part. Fits Growler GX1.Contents:2 pieces

€9.90*

E540015 UFRC Hinge pin bushing A

Genuine UFRC spare/option part. Fits Growler GX1.Contents:4 pieces

€4.90*

6102 FG Front wishbone pin

Genuine FG spare/option part. Fits all FG-Marder, Beetle, Pajero und Monster Beetle.Measures:Length: 79 mmDiameter: 6 mm Contents:2 pieces

€8.70*

B69013 Hinge pin plates with covers

Dimensionally identical with Losi 5ive-T part LOSB2078F / LOSB2079 / LOSB2078R.Contents:1 piece

€47.90*

2012-141 Mecatech Pin 4x10 mm

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.20*

LOS254023 Hinge Pin set 6IX

Genuine Losi spare/option part.Content:1 set

€15.99*

R195 UFRC A-arm hinge pin

Genuine UFRC spare/option part. Fits Ghost Rabbit GR1.Contents:2 pieces

€17.90*

6203 - BODY PIN (8mm/BLACK/LARGE/20pcs)

Länge 30mm

€5.99*

5383/04 FG Piston pin CY29

Original FG Ersatz-/Tuningteil.Spare part for 29 cm³ Chung-Yang engines.Inhalt:1 Stück

€4.50*

7310 FG Gudgeon pin for Zenoah G230/240

Genuine FG spare/option part.Dimensions:Length: 26 mmDiameter: 8 mmContents:1 piece

€7.20*

6182/01 FG Headless pin M4x50 mm

Genuine FG spare/option part. Contents:2 pieces

€3.30*

7087/03 FG Stop pin 2 mm

Genuine FG spare/option part. Stop pins prevent a damaning of the volume control by a strong bottoming of the shock absorber. Suitable for the upper clamper fastening. Only useable in connection with newer upper damper fastening with boring.Diameter: Length: 16 mm Diameter: 2 mmContents:5 pieces

€2.20*

R219 UFRC Drive pin universal joint

Genuine UFRC spare/option part. Fits Ghost Rabbit GR1.Contents:2 pieces

€5.90*

305224 Hinge pin set Gas Devil

Genuine Smartech spare/option part.Content:1 set

€22.90*

156 products found for "vpin"

Filter products

rc-car-online - Home