s23017 Muffler set PT 23/28

Smartech

€19.90*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: s23017

EAN: 4058575028123

Product information "s23017 Muffler set PT 23/28"

Genuine Smartech spare/option part.

Muffler with mounting bolts.

Content:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0564 RC Tech Pipe Protect 400 ml

Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml

Content: 400 Milliliter (€24.75* / 1000 Milliliter)

€9.90*

Similar products

7354/08 FG Spacer plate for CY / Zenoah / Fuelie

Genuine FG spare/option part.Installs between carb and air filter/airbox to assure choke flap clearance.Contents:1 piece

€11.30*

y1380 High performance starter rope, carbon grey

3 mm high performance starter rope; with a breaking strength of almost a metric ton it is far superior to any other starter rope available. Even large displacement high compression engines are no match for this rope. Please note:The usual fusion of cutting edges and knots on standard starter ropes using a flame is mostly unrewarding with this rope! We therefore recommend securing the knots with 2 - 3 drops of superglue on the outside. Length approx. 80 cm; fits all current pull starters.

€8.90*

7304/02 FG Ball bearing for CY / Zenoah / Fuelie

Genuine FG spare/option part.Dimensions:12 x 28 x 8 mmContents:2 pieces

€25.90*

7303/08 FG Seal ring for CY / Zenoah / Fuelie

Genuine FG spare/option part.Spare partvv for CY / Zenoah G230/260.One each 1x 12 x 28 x 7 mm and 12 x 22 x 7 mmContents:2 pieces

€19.90*

903190, Engine kill switch

Please note:The usual spare parts supply is not yet available for these engines. Therefore the parts may come from disassembled new engines. Since every single engine is tested at the factory, the parts may show some minor signs of "use".

€6.80*

s23019, Exhaust gasket PT 23/28

Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€2.95*

s23013, Carburetor spacer plate PT 23/28, set

Spacer plate with 2 gaskets.

€4.90*

s23022, Spark plug wrench PT 23/28, 1 pce.

€6.90*

s23021 Carburetor gasket PT 23/28

Genuine Smartech spare/option part.Please note: It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContent:1 piece

€5.90*

s23024, Needle bearing PT 23/28, 1 pce.

€7.90*

s23007, Clutch set PT 23/28

Clutch shoes with spring, mounting bolts and washers.

€27.70*

903184, Clutch set

Complete clutch with spring, carrier and bolts.Please note:The usual spare parts supply is not yet available for these engines. Therefore the parts may come from disassembled new engines. Since every single engine is tested at the factory, the parts may show some minor signs of "use".

€27.70*

Customers also viewed

LOS256009 Losi Exhaust Deflector and Spring Clip MTXL

Genuine Losi spare/option part.Contents:1 piece

€10.99*

T2070-15110 Genuine Zenoah exhaust muffler

Genuine Zenoah spare/option part. Genuine Zenoah steel muffler for G230 / G240 / G260 / G270 / G290 / G320 engines. Fits CY23 / CY26 / CY27 / CY29 / GP290 engines and various similar engines with a mounting hole spacing of 34 mm.Contents:1 piece

€7.90*

06.05.05 OSKART Exhaust Pipe

Genuine OSKART Exhaust Pipe spare/option part.Fits 1/2 scale OSKART.Contents:1 piece

€115.00*

AREA-BJ047 Reed valve block V2 for Zenoah G320

This reed valve system converts a normal piston-port engine into a reed valve engine. It offers the advantage of increased intake duration for a better charge for more power. As a positive side effect no fresh gas loss occurs during the downward movement of the piston because the membranes close this path.The reed valve block replaces the usual stock insulator. To use the advantage of the reed system, it is necessary to modify the piston skirt on the intake side. Depending on the engine it is advantageous for best results, to slightly match the cylinders intake port to the Epoxy insulator plate at the bottom of the reed valve system. Both steps are described in the installation instructions for Zenoah and Chung Yang engines. Our thanks for these instructions go to our customer Thomas Hoenicke.Note: For the time being the epoxy insulator plate must be slightly reworked to fit a G320 Zenoah engine. The manual has been written with the conversion of a G320, the affected area for modification is therefore shown.The unit is 24.5 mm high.

€79.90*

7335 FG Insulator gasket for Zenoah / CY / Fuelie

€4.50*

y1570 CYS S0650 large scale servo with Double sided alloy servoarm, 55 kg/0,11 sec

CYS S0650, a digital large scale servo with very robust steel gears. It offers a lot of power at good speed. Its a direct fit for cars like Losi 5ive and DBXL, UFRC Growler GX1, FG and so on.Technical data: Operating voltage: 6V-7.4V Operating speed (6.0 V): 0.13 s / 60 degrees Operating speed (7.4 V): 0.11 s / 60 degrees Holding torque (6.0V): 470 Ncm holding torque (7.4V): 539 Ncm Cable: Universal/JR connector, approx. 300mm Gear material: 1st stage brass, all others steel Bearing: 2 x ball bearing Size: 66 x 30 x 56mm Weight: 204 grams Double sided servo arm 68mm length Guide sleeve 4 pieces Mounting screws 4 pieces Mounting screws for servoarm 1 piecesContents:1 piece

€69.90*