Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

s05502 alloy uprights, rear, for Carson/Smartech and FG models, 1 pair

Product information "s05502 alloy uprights, rear, for Carson/Smartech and FG models, 1 pair"

Alloy rear uprights, with replaceable hinge pin bushings, with spacer tubes for the the ball bearings included.

Fits FG and Carson/Smartech Attack, Attack Evo, Gas Blaster, Gas Devil, Super Attack, CRT, CRT 4x4, CPT, Uno, Monster Truck, Pick Up, Beetle and C5.

One each lefthand and righthand version.

Please note: for the installation of all popular disc brakes, we recommend: y6479

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y6479 HT rear alloy upright
Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*

Accessories / Spare parts

Average rating of 0 out of 5 stars

6078 FG Ceramic ball bearings, sealed 8x22x7 mm
Genuine FG spare/option part.Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Wheel bearing suitable for all FG and Carson models.Contents:2 pieces

€19.90*

Customers also bought

Average rating of 0 out of 5 stars

6029/08 FG Ball-and-socket joint for M8
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

7475/01 FG Alloy ball-and-socket joint Ø5/10x15mm - 2pcs.
Alloy ball-and-socket joints with surface coating, 70% less weight.

€6.50*

Similar products

Average rating of 0 out of 5 stars

y04475 HT Rear alloy shock mount 2WD
Genuine HT spare/option part.Rear alloy damper plate with several adjustment possibilities of the shock absorbers. Replacement for FG plastic rear shock tower FG 7072/01Please note: When installing in combination with plastic diff mounts you should insert a-arms with hinge pins before bolting together rear plate and diff mounts.Content:1 pieces

€89.90*

Average rating of 0 out of 5 stars

y0145 Alloy engine mount, small, for Carson C5 / R5 / Smartech Ranger / Reely onroad cars, 1 pce.
CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant.They come with all necessary hardware included.

€39.90*

Average rating of 0 out of 5 stars

y04472/05 HT Rear lower alloy wishbone narrow
Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y04476/02 HT Alloy rear diff mount l/h+r/h one-piece-solid
Genuine HT spare/option part. Suitable for all FG 2WD and Smartech/Carson 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1. Content:2 piece

€99.90*

Average rating of 0 out of 5 stars

y7087/02 Alloy shock shaft end long
Genuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€15.90*

Average rating of 0 out of 5 stars

6479 FG Rear alloy uprights 08
Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (wishbone pin), too. Fits the rear axle of all FG offroad cars (2WD and 4WD) and all Carson / Smartech cars.Content:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm

€133.95*

Average rating of 0 out of 5 stars

y19206 Alloy gear Plate for 2-Disc Brake
Alloy gear plate. Constant bearing distances even under high thermal conditions.Fits Marder/Beetle and Eco-line cars, will also fit Carson Streetmodel C5.You will need part number for installation.

€74.90*

Average rating of 0 out of 5 stars

306050, Carson alloy a-arms, rear upper, pair
Rear upper a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

€49.90*

Average rating of 0 out of 5 stars

y0143 Alloy engine mount, large, for Carson C5 / R5 / Smartech ranger / Reely onroad cars, 1 pce.
CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.

€49.90*

Average rating of 0 out of 5 stars

HT Aluminum rear suspension conversion kit for Smartech UNO, Carson Attack / Super Attack / Gas Blaster / C5 / R5, 2WD , y1003, set
Alloy rear axle conversion kit for Smartech UNO and Carson Attack and Super Attack (not Evo!), Gas Blaster and C5; Smartech Spider and Ranger cars.Fits for:- C5 / On road / Touring car- C6 Attack- Touareg- Super Attack- Gas Blaster- Duratrax Firehammer- Spider- Big AttackThe set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04.

€299.90*

Average rating of 0 out of 5 stars

y04474 HT Rear upper alloy wishbone 2WD
Genuine HT spare/option part.Rear upper alloy wishbone with droop stop. Replacement for plastic wishbone FG 6074/02.Will also fit the following Carson/Smartech cars:Onroad chassis C5, Attack, Super Attack, Gas Blaster and TouaregCarson Comanche, Attack Evo, CRT + CPT when installedwith 75 mm turnbuckle y0988Comes with 2 M8 low height nuts included. Contents:2 pieces

€69.90*

Average rating of 0 out of 5 stars

306049, Carson alloy a-arms, rear lower, pair
Rear lower a-arms, a clamping system for the turnbuckles makes lock nuts obsolete.

€79.90*

Customers also viewed

Average rating of 0 out of 5 stars

y6479 HT rear alloy upright
Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*

Average rating of 0 out of 5 stars

y0553 Zenoah G260RC with Walbro carburetor WT 603B
This is the G260 in the 26 cm³ version.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€274.90*

Average rating of 0 out of 5 stars

SB012 GPM Aluminum front gearbox for Losi Super Baja Rey / 2.0 / Rock Rey
Original GPM Ersatz-/Tuningteil.The GPM aluminum gear box ensures a much stiffer and more temperature resistant seat for the bearings of differential and bevel pinion shaft. This significantly increases the service life of gears and ball bearings.Inhalt:1 Stück

€99.90*

Average rating of 0 out of 5 stars

32417 Steering blocks left/right - 2pcs.
Fits on Carson models. Not for Gas Devil.

€39.90*

Average rating of 0 out of 5 stars

500405451 Carson CY5 Linkage set
Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 set

€39.90*

Average rating of 0 out of 5 stars

y6107 Wheel squares 18 mm HART-COAT, 9,5 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€14.95*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Theme Development