y1420 Diff Locker for Losi 5ive-T/2.0, 5ive-B and Mini
€34.97
% €69.95 (50% saved)
Available
Product information "y1420 Diff Locker for Losi 5ive-T/2.0, 5ive-B and Mini"
The spool replaces the center differential and keeps the speed of both output shafts the same. As a result, especially the acceleration of the vehicle is significantly increased.
The spool is nicely made of high-quality burnished steel and very strong. Its total length is the same as a normal differential housing with gasket. The gasket is no longer used with the spool. The driving pin of the front output shaft is secured by an O-ring. The screws for the connection with the spur gear are secured with nylock nuts. This eliminates the need for waiting for the curing of a thread locking compound and makes the removal of screws with damaged head much less critical.
The spool would physically fit front and rear applications as well; however, its use here makes no sense to driving dynamics.
Scope of delivery:
- Spool
- 2 x Driving pin 4 x 20 mm
- O-ring
- 4 x Steel nylock nut M4
Login
Customers also bought
Genuine ATOP spare/option part. Upper rear camber rods with guide bushing set and with pivoted steel ball joints right/left thread and locknuts for 5ive-T. Balls with 6 mm hole, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 140 mm. Contents:2 pieces
For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.
Item N° LOSB2576Rear Bumper Brace Set 5T, 1 St.
Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi 5ive-T and 5ive-T 2.0.The set includes a total of 481 screws, in different quantities which are all used on the Losi 5ive-T.14 sizes of cap head screws12 sizes of CSH screws21 sizes of button head screws6 sizes of set screws5 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:2 piecesM2,5x84 piecesM2,5x2020 piecesM3x1010 piecesM3x124 piecesM4x84 piecesM4x124 piecesM4x202 piecesM4x252 piecesM4x402 piecesM5x162 piecesM5x206 piecesM5x302 piecesM5x352 piecesM5x75Grub screws:7 piecesM3x310 piecesM4x54 piecesM4x84 piecesM5x64 piecesM5x404 piecesM8x16CSH screws in 10.9:16 piecesM4x1222 piecesM4x164 piecesM4x2024 piecesM4x256 piecesM5x1211 piecesM5x202 piecesM5x256 piecesM5x302 piecesM5x5010 piecesM6x162 piecesM6x208 piecesM6x25Safety washers:4 piecesM5Self-locking nuts:10 piecesM312 piecesM412 piecesM510 piecesM6Washers:10 piecesM3,210 piecesM4,310 piecesM5,36 piecesM6,4Button head screws in 10.9:4 piecesM3x820 piecesM3x1010 piecesM3x124 piecesM3x204 piecesM4x84 piecesM4x124 piecesM4x166 piecesM4x2024 piecesM4x254 piecesM4x305 piecesM4x355 piecesM4x404 piecesM5x104 piecesM5x1611 piecesM5x206 piecesM5x308 piecesM5x354 piecesM5x404 piecesM6x164 piecesM6x204 piecesM6x30
Genuine HT spare/option part. Very strong, multiple glas fiber layers, nevertheless very stretchable. Resist maximum temperatures up to 250°C (482°F) from.Needs hose clamps with at least 35 mm inner diameter! Maße:Inside diameter: 22 mm Outside diameter: 30 mmWall thickness: 4 mmLength: 50 mmContents:1 piece
Genuine HT spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PTTemperature and dimensionally stable. Thickness: 1,0 mm.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece
Customers also viewed
The spark plug tester wiil be put in line between the spark plug in the engine and the spark plug cap. When the spark plug is in good working order, pulling the recoil starter will produce a spark easily visible in the clear section of the tester (see video!).
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece
Genuine Losi spare/option part. Gear table:Gears:Ratio:Slug:LOSB5046 18 Teeth pinion / 18 to 6211,39LOSB5804 Engine MountLOSB5044 19 Teeth pinion / 19 to 6210,79LOSB5803 Engine MountLOSB5045 20 Teeth pinion / 20 to 6210,25LOSB5805 Engine MountThe 62T spur gear is also very helpful with brushless conversions, creating more space between motor and center diff. This allows the use of smaller pinions for all those, who are not into top speed only.Contents:1 piece
Genuine HPI spare/option part. Baja 5T/Rear - Losi 5ive-T Sand Buster-T Rib front and Sand Buster-T Paddle rear tires are now available from HPI Racing. These tires are designed specifically for the Baja 5T truck.Sand Busters-T Rib fronts have a rib down the center of the tire to cut through the sand for stable steering, and the Sand Buster-T Paddle rears have 10 large paddles for maximum traction in sand and soft dirt. Sand Buster's are designed for the sand, but you can also run them in loose dirt and even in the mud!Suitable for Losi 5ive-T as well (paddles all around).Contents:2 pieces / 1 pair
For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€298.00 / 1000 Milliliter)
Zenoah linnen bag, top quality, extremely durable Material. Dimensions:Height: 320 mmDepth: 90 mmWidth: 270 mm
Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! Color red (the decals pictured are not included!). The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware